Whirlpool IFA1.UK1 Indesit Built in Fridge User Guide
- June 4, 2024
- Whirlpool
Table of Contents
Whirlpool IFA1.UK1 Indesit Built in Fridge
PRODUCT DESCRIPTION
FIRST TIME USE
Wait at least two hours, after the installation, before connecting the
appliance to the power supply.
Connect the appliance to the power supply and turn the thermostat knob to
switch on the appliance. After turning the appliance on, you must wait for 4-6
hours for the correct storage temperature to be reached for a normally filled
appliance. Position the antibacterial anti-odour filter in the fan as
demonstrated in the filter packaging (if available).
**CONTROL PANEL
**
- Thermostat control reference
- Freezer and refrigerator compartment temperature
- LED bulb
FREEZING FRESH FOOD
Place fresh food to be frozen on the grid in the freezer compartment,
avoiding direct contact with food that is already frozen.
The quantity of fresh food that can be frozen in 24 hours is written on the
rating plate.
To freeze fresh food, place the freezer compartment grid in the upper
position.
FREEZER AND REFRIGERATOR COMPARTMENT TEMPERATURE
- This Fridge/Freezer is switched on by means of the thermostat located inside the refrigerator compartment.
- The temperature of both compartments is adjusted by turning the thermostat knob.
- Thermostat set to 1/2 : minimum refrigeration
- Thermostat set to 3-5 : medium refrigeration
- Thermostat set to 6/7 : maximum refrigeration
- Thermostat set to •: no refrigeration, no light
- Refrigerator compartment: MEDIUM
- To avoid food waste, please refer to the recommended setting and storage times found in the online user manual.
HOW TO STORE FOOD AND BEVERAGE
Legend
REFRIGERATOR COMPARTMENT
Light system (depending on model)
- This product contains a light source of energy efficiency class G
- This product contains a light source of energy efficiency class G
- This product contains 4 lateral light sources of energy efficiency class F
- This product contains 4 lateral light sources of energy efficiency class F and a top light source of energy class G
- This product contains a top light source of energy efficiency class G
FREEZER COMPARTMENT
Freezing fresh food
- It is advisable to set the temperature colder or turn on the Fast Freeze/Fast Cool* at least four hours before removing the food from the freezer compartment, to prolong the preservation of the food during the defrosting phase.
- To defrost, unplug the appliance and remove the drawers. Leave the door open to allow the frost to melt. To prevent the water from escaping during the defrost, it is advised that you place an absorbent cloth on the bottom of the freezer compartment and wring it out regularly.
- Clean the inside of the freezer compartment and dry it carefully.
- Turn the appliance back on and put the food back inside. To remove the frost on the STOP FROST* accessory, follow the CLEANING.
Ice cubes
Fill 2/3 of the ice tray with water and put it back in the freezer
compartment. Do not, under any circumstances, use sharp or pointed objects to
remove the ice.
The quantity of fresh food that can be frozen in a specific time period is
indicated on the rating plate.
Load limits are determined by baskets, flaps, drawers, shelves etc. Make sure
that these components can still close easily after loading.
GENERAL INFORMATION
The drawers, baskets and shelves should be kept in their current position unless otherwise specified in this quick guide. The light system inside the refrigerator compartment uses LED lights, allowing for better lighting than with traditional light bulbs, as well as for very low energy consumption. Doors and lids of the refrigeration appliance should be removed before disposal in the landfill, to avoid children or animals getting trapped inside.
TROUBLESHOOTING
Policies, standard documentation and additional product information can be found by:
- Visiting our website docs.indesit.eu
- Using QR Code
- Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-sales Service, please state the codes provided on your product’s identification plate.
The model information can be retrieved using the QR-Code indicated on the energy label. The label also includes the model identifier that can be used to consult the https://eprel.ec.europa.eu database portal.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>