SIEMENS SN23EW27VE Free Standing Dishwasher User Manual

: June 14, 2024
: SIEMENS

SIEMENS SN23EW27VE Free Standing Dishwasher

SIEMENS-SN23EW27VE-Free-Standing-Dishwasher-image

SN23EW27VE Free Standing Dishwasher

Translated from Dutch to English – www.onlinedoctranslator.com
SN23EW27VE
Dishwasher
Usermanual
Siemens Home Appliances

NL
Refer to the Digital User’s Guide for more information.

Safety

1 Safety
Please observe the following safety instructions.
1.1 General instructions ¡Read this manual carefully.
¡Keep the operating instructions and product information for future reference
for use or for subsequent owners. ¡Do not connect the device in case of transport damage.
1.2 Destination of the device Only use the device: ¡to wash dishes. ¡for domestic use and in enclosed spaces within the home
sable environment.
¡up to an altitude of 4000 m above sea level.
1.3 Restriction of Users This appliance can be operated by children aged from 8 years and above and by persons with reduced physical, sensory or mental capabilities or lack of experience and/or knowledge if they are supervised or have been instructed in the safe use of the appliance and understand the resulting hazards. understood. Children must not play with the appliance. Cleaning and user maintenance must not be made by children unless they are supervised. Make sure that children under the age of 8 cannot reach the device or the connection cable.
1.4 Secure installation
WARNING Risk of injury! Improper installations can cause injury. When setting up and connecting the device, follow the
instructions in the operating and installation instructions.
4

SafetyNL
WARNING Risk of electric shock! Improper installations are dangerous. Only connect and operate the device in accordance with the
information on the rating plate. Always use the power cord supplied with the new device.
Only connect the device to an alternating current mains via a properly installed socket with earthing contact.
The protective earthing system of the domestic electrical installation
must be installed in accordance with the electrotechnical regulations.
Never power the device through an external switching device, e.g. a time switch or remote control.
When the appliance is installed, the mains plug of the mains connection cable must be freely accessible, or if free access is not possible, a disconnection device must be installed in the permanently installed electrical installation in accordance with the installation instructions.
When setting up the device, make sure that the mains cable is not pinched or damaged.
Cutting the supply hose or immersing the AquaStop valve in water is dangerous. Never immerse the plastic housing in water. There is an electric
valve in the plastic housing on the inlet hose.
Never cut the inlet hose. There are electrical connection cables in the supply hose.
WARNING Risk of fire! Using an extended power cord and unauthorized adapters is dangerous. Do not use extension cords or multiple sockets. Only use adapters and power cords approved by the
manufacturer. If the power cord is too short and a longer power cord is not
available, contact an electrical retailer to adjust the home installation.
5

NLSafety
Contact between the device and installation pipes can lead to failure of the installation pipes, for example gas pipes and power pipes. Gas from a corroded gas pipe can ignite. A damaged power line can lead to a short circuit.
Make sure that there is a distance of at least 5 cm between the device and the installation pipes.
WARNING Risk of burns! Improper installation can lead to burns. For free- standing appliances, make sure that the back of the
appliances is against a wall.
1.5 Safe use
WARNING Risk of serious health hazard!
Non-compliance with the safety instructions and instructions for use on the packaging of dishwasher detergents and rinse aids can lead to serious health damage. Observe the safety instructions and instructions for use on the
detergent and rinse aid packaging.
WARNING Risk of explosion! Solvents in the rinsing chamber of the device can lead to explosions. Never put solvents in the washing area of the appliance. Strongly corrosive alkaline or strongly acidic cleaning agents in combination with aluminum objects in the washing area of the appliance can lead to explosions. Never use strongly corrosive alkaline or strongly acidic cleaning
agents, especially those for professional or industrial use, in combination with aluminum objects (e.g. grease filters of extractor hoods or aluminum pans) in the dishwasher, e.g. for machine maintenance.
6

SafetyNL
WARNING Risk of injury! An open appliance door can lead to injuries. Only open the appliance door to load and unload dishes in
order to avoid accidents such as tripping. Do not sit or stand on the open appliance door. Knives and objects with sharp points can cause injuries.
Place knives and objects with sharp points with the points down in the cutlery basket, knife holder or cutlery drawer.
WARNING Risk of burns! If the appliance door is opened while the program is running, hot water may splash out of the appliance. Only open the appliance door carefully during the program run.
WARNING Danger of tipping over! Overloaded crockery baskets can cause the appliance to tip over.
Never overload the crockery baskets of free-standing appliances.
WARNING Risk of electric shock! Penetrating moisture can cause an electric shock. Only use the device in closed rooms. Never expose the device to excessive heat and humidity. Do not use a steam cleaner or high-pressure cleaner to clean
the appliance. Damaged insulation of the power cord is dangerous. Never bring the power cord into contact with hot device parts or
heat sources. Never bring the power cord into contact with sharp points or
edges. Never kink, crush or modify the power cord.
7

NLSafety
1.6 Damaged device
WARNING Risk of electric shock! A damaged device or power cord is dangerous.
Never use a damaged device. Never use a device with a cracked or broken surface.
Never pull on the power cord to disconnect the device from the power supply. Always pull the plug on the power cord.
If the appliance or the power cord is damaged, immediately unplug the power cord or switch off the fuse in the fuse box and close the tap.
Contact the service department. Page 54 Improper repairs are dangerous. Only trained specialist personnel may carry out repairs on the
device. Only original spare parts may be used for repairing the device.
If the mains connection cable or device connection cable of this device becomes damaged, it must be replaced with a special power connection cable or special device connection cable available from the manufacturer or customer service.
1.7 Dangers for children
WARNING Risk of suffocation! Children can pull packaging material over their heads and become entangled and suffocated. Keep packaging material away from children. Do not let children play with packaging material. Children can inhale or swallow small parts and suffocate.
Keep small parts away from children. Do not let children play with small parts. Children can lock themselves in the device and suffocate. If present, use the child lock.
8

SafetyNL
Never allow children to play with or operate the device.
WARNING Risk of health hazard! Children can lock themselves in the appliance and endanger their lives. In the case of discarded appliances, unplug the mains cable, then
cut the mains cable and damage the appliance door lock to such an extent that the appliance door no longer closes.
WARNING Risk of crushing! Children can become trapped between the appliance door and the cabinet doors below with high-mounted appliances. Watch out for children when opening and closing the appliance door.
WARNING Risk of chemical burns! Dishwasher and rinse aids can cause burns to the mouth, throat and eyes. Keep children away from detergents and rinse aids. Keep children away from the opened device. The water in the
wash cabinet is not drinking water. Residues of detergent and rinse aid may still be present in this.
WARNING Risk of injury! Children can get their little fingers caught in the slots of the tablet tray and injure themselves. Keep children away from the opened device.
9

NLto avoid
avoid
2 Material damage
v
to avoid
to avoid
2.1 Secure Installation NB!
Improper installation of the device can lead to damage. If the dishwasher is installed below
or above other household appliances, the information on installation in combination with the dishwasher in the installation instructions for the respective household appliance must be observed. If no information is available or if the installation instructions do not contain any instructions on this subject, check with the manufacturer of these household appliances whether the dishwasher can be installed above or below other household appliances. If no information from the manufacturer is available, the dishwasher must not be installed above or below these household appliances. To ensure safe operation of all household appliances, you must also follow the installation instructions for the dishwasher. Do not install the dishwasher under a hob. Do not install the dishwasher near heat sources such as radiators, water heaters, cookers or other appliances that give off heat.
10

Contact between the unit and water pipes can lead to corrosion of the water pipe and the water pipe may leak. Make sure there is a distance of at
least 5 cm between the appliance and the water pipe. This does not apply to the supplied pipes for the drinking water connections and the water drain connection. Modified or damaged water hoses can lead to material damage and damage to the device. Never kink, pinch, alter or cut water hoses. Only use the supplied water hoses or original replacement hoses.
Reuse never used water hoses.
A water pressure that is too low or too high can hinder the function of the device.
Make sure that the water pressure at the water supply installation is at least 50 kPa (0.5 bar) and at most 1000 kPa (10 bar).
If the water pressure exceeds the specified maximum value, a pressure reducing valve must be installed between the drinking water connection and the hose set of the device.
2.2 Safe use
NB! Escaping water vapor can damage built-in furniture. After the program has ended, allow
the appliance to cool down briefly before opening the appliance door.
The rinse aid container can be corroded by softening salt for dishwashers. To ensure that any spilled softener
salt is flushed out of the rinse aid container, the

the softening salt must be filled into the softening salt container immediately before the program starts. Dishwasher detergent can damage the water softener. Only fill the water softener tank with softening salt for dishwashers. Unsuitable detergents can damage the appliance. Do not use a steam cleaner. To avoid scratches, do not use sponges with a rough surface or abrasive cleaners on the surface of the device. To prevent corrosion in dishwashers with a stainless steel front, do not use sponge cloths or rinse them well several times before using for the first time.

Environmental protection and savings

3.1 Disposal of the packaging
The packaging materials are environmentally friendly and can be reused. Dispose of the individual
components separately by type.

Environmental protection and savingNL
3.2 Saving energy
If you follow these instructions, your appliance will use less electricity and water.
Use the Eco 50° programme. aThe Eco 50° program is ener-
energy-saving and environmentally friendly.
“Programs”, If you only need to wash a few dishes, you can use the additional Half load function.1 aThe program is
lighter load is adjusted and the consumption values are reduced.
“Additional functions”,
3.3 autoOpen Dry
The appliance door opens automatically during the drying phase. As a result, a particularly economical drying is achieved. For optimum drying results, it is advisable to wait for the end of the program before removing the dishes. The program is finished when “0h:00m” is shown on the display.
If the automatic door opening is deactivated, the energy consumption increases and the drying phase is usually shortened. “Overview of basic settings”,

1Depending on the device version 11

NLSet up and connect

Set up and connect

For correct use, connect the device to electricity and water in a professional manner. Observe the required criteria and the installation instructions.
4.1 Scope of delivery
After unpacking, check all parts for transport damage and the completeness of the delivery. For complaints, please contact the store where you bought the device or our customer service. Remark:The device has been checked at the factory for correct operation. This may leave water stains on the device. The water stains disappear after the first wash cycle.
The delivery consists of: ¡Dishwasher ¡Instructions ¡Assembly instructions
¡Other documents containing information
tie ¡Mounting material
¡Connection cord ¡Quick guide
4.2 Setting up and connecting the device
You can install your substructure or built-in appliance in the kitchen unit between wooden and plastic walls. If you subsequently set up the device as a free-standing device, you must secure the device against tipping over, e.g. by screwing it to the wall or installing it under

a continuous worktop that is permanently connected to the adjacent cabinets. 1.Observe the safety instructions.
4 2.Observe the instructions for the
electrical connection. 3.Check the contents of the package
and the condition of the device.
4.The required installation dimensions can be found in the installation instructions.
5.Level the appliance using the adjustable feet.
Pay attention to a firm stand. 6.Install the drain water connection.
7.Install the drinking water
connection. 3 8.Connect the device to the power.
4.3 Drain water connection
Connect the appliance to a drain water connection so that the dirty washing water can be drained away.
Install waste water connection 1.You will find the necessary steps in
the supplied installation manual.
2.Connect the drain hose to the connection nipple of the siphon using the parts supplied.
3.Make sure that the drain hose is not kinked, crushed or tangled.
4.Make sure that the water is not prevented from flowing out by a plug in the waste water connection.

12

4.4 Drinking water connection Connect the device to a drinking water connection. Install drinking water connection Remark ¡If you replace the device
use a new water supply hose.
1.You will find the necessary steps in the supplied installation manual.
2.Connect the device to the drinking water connection using the enclosed parts. Observe the technical data.
3.Make sure that the drinking water connection is not kinked, crushed or entangled.
4.5 Electrical connection
Connect the device electrically Comments ¡Take the safety rules
Page 4in mind. ¡Please note that the
protection system only works when the device is supplied with power.
1.Connect the appliance plug of the connection cable to the appliance.
2.Insert the mains plug of the appliance’s connecting cable into a socket in the vicinity of the appliance. The connection data of the device can be found on the rating plate.
3.Check the mains plug for tightness.

Set up and connectNL 13

NLGet to know your device

Get to know your device

5.1 Device
Here you will find an overview of the components of your device.

Type plate

1Depending on the device version

Type plate with E number and FD number . You need this information for the service department.

14

2

Detergent dispenser

3

Lower crockery basket

4

Reservoir for softener

thing salt

5

Lower spray arm

6

Tablet tray

7

Upper crockery basket

8

Cutlery tray

9

Etagere1

10 Upper spray arm

11

sieving system

12 Reservoir for gloss flushing agent

1Depending on the device version

Get to know your deviceNL
Pour the detergent into the detergent dispenser. “Detergent”, Lower crockery basket
Add softening salt to the water softener salt reservoir. “Softening system”, The lower spray arm cleans the dishes in the lower basket. If the dishes are not cleaned optimally, clean the spray arms. “Clean the spray arms”, During the wash cycle, tabs automatically fall from the detergent compartment into the tablet compartment where the tabs can dissolve optimally. Upper basket
Cutlery drawer
Etagere
The upper spray arm cleans the dishes in the upper basket. If the dishes are not cleaned optimally, clean the spray arms. “Clean the spray arms”, Sieve system
Pour rinse aid into the rinse aid reservoir. “Rinse system”,

15

NLGet to know your device

5.2 Controls

You can use the control panel to set all the functions of your device and obtain information about the operating status. Some keys perform various functions.

12

3 4 5 6

78

13 12 11 10 9

1

ON/OFF key

test

and Reset-

Switch on device Switch off device Cancel program

2

Program keys

Programs

3

display

Information about the remaining time or basic settings is shown in the display. You can change the basic settings via the display and the adjustment buttons.

4

WLAN indication

5

Indicieatwatertoe e vo r

6

Softening indicator gadd salt

to fill

7

Program tkeys and extra

functions

1Depending on n the app comobuvtring

“Change basic settings”, Home Connect
iindicationvoor w rasteupply
softening system eem “softening z fill out”, Program ammas “Program moms”, s Additional function “Additional fun ctions”,

16

8

Start key

9 Test

10 Remote Start 11 Select start time 12 Top up rinse aid indicator

13

Door handle1

1Depending on the device version

Symbols on the display1
Depending on the device version, the display shows the following symbols. Find the explanation for this.
Symbol Description
If the symbol for machine maintenance burns, then perform machine maintenance. “Machine cleaning”,
When the rinse aid refill indicator lights up on the display, refill rinse aid.

“Filling with rinse aid”,

Get to know your deviceNL

Start program

If you

for approx. 3 seconds

button opens the basic settings.

“Change basic settings”,”Remote Start”,
Create time setting
Final rinse system “Filling with rinse aid”,
Open the appliance door.

Symbol Description
When the refill water softener salt indicator lights up on the display, fill in the water softener salt the water softener salt reservoir immediately before the program starts. “Filling with softening salt”,
If the device with a wireless WLAN home network is connected, the symbol lights up in the display. “Home Connect”,
If you have activated the time preselection, the symbol lights up in the display. “Make time setting”,
When you have started a programme, the symbol lights up in the display.

1Depending on the device version 17

NLGet to know your device

Symbol

Description
If you have activated the key lock, the symbol lights up in the display. “Activate key lock”,
If a fault occurs in the water supply or water drainage, the symbol lights up or flashes on the display. “Troubleshooting”,

18

Programs

Here you will find an overview of the adjustable programs. Depending on the configuration, different programs are offered on the machine’s control panel. The running time depends on the selected program. In addition, the running time depends on the water temperature, amount of dishes, degree of soiling and selected extra function . Also a

ProgramsNL
deactivated rinse system or lack of rinse aid affects the running time. The consumption values can be found in the quick guide. The consumption values apply to normal conditions and a water hardness of 13 – 16 °dH. Various factors, such as water temperature or pipe pressure, can lead to deviations.

Program Intensive 70° Auto 45-65°
Eco 50° Speed 65°

Usage China: ¡pots, pans, non-sensitive
crockery and cutlery Degree of pollution: ¡very encrusted, burnt-in or
dried-on starch or proteincontaining food residues China: ¡mixed crockery and
cutting
Degree of pollution: ¡slightly dried, in the home
keep usual food scraps
China: ¡mixed crockery and
cutting
Degree of pollution: ¡slightly dried, in the home
keep usual food scraps
China: ¡mixed crockery and
cutting
Degree of pollution: ¡slightly dried, in the home
keep usual food scraps

Program run
Intensive: ¡Pre-rinse ¡Cleaning 70 °C ¡ Intermediate rinse ¡Rinse rinse
69°C ¡To dry
Sensor Optimized sed: ¡Become dependent
of the degree of pollution of it dishwater optimalized by it sensor system.
Most economical program:
¡Pre-rinse ¡Cleaning 50 °C ¡ Intermediate rinse ¡Rinse rinse
48°C ¡To dry
Time-Optimized: ¡Cleaning 65 °C ¡ Intermediate rinse ¡Rinse rinse
69°C ¡To dry

19

NLPrograms

Program Speed 45°
Machine cleaning favourite

Usage China: ¡sensitive crockery, cutlery,
temperature-sensitive plastics and glasses Degree of pollution: ¡little caked fresh leftover food Use only with empty device.
“Favorite”,

Program run Time-Optimized: ¡Cleaning 45 °C ¡ Intermediate rinse ¡Rinse rinse
55°C
Machine cleaning 70°C –

Remark:The relatively longer running time of the Eco 50° program is the result of longer soaking and drying times. These enable optimum consumption values.
6.1 Instructions for test institutes
Test institutes receive instructions for comparison tests, e.g. according to EN60436. This concerns the conditions for carrying out the tests, not the results or the consumption values.
Inquiry by e-mail to: dishwasher@testappliances.com The product number (ENr.) and the production number (FD) are required, which you will find on the rating plate on the appliance door.
6.2 Favourite
Under the key can you combine save the nation of a program and additional function. Save the program via the Home Connect app or on the appliance.

The Pre-rinse program is stored under this button at the factory. Pre-rinse is suitable for all types of crockery. The dishes are pre-cleaned by cold rinsing.

For downloaded programs and in the delivery state, the program name is displayed in the app. The display alternates between “APP” and the remaining time.
Tip:You can download additional programs via the Home Connect app and store them under the button.1

favourite save

on the device

1.Press. 2.Press the program button. 3.Press the button for the desired
additional function. 4.press for 3 seconds.

aThe selected program and the additional function
flash. a flashes.

aThe program and the additional function have been saved.

1Depending on the device version 20

Tip:To reset the program to the prewash program saved at the factory, you can use the Home Connect app1or reset the device to factory settings.

ProgramsNL

1Depending on the device version 21

NLAdditional features

Additional functions

Here you will find an overview of the adjustable additional functions. Depending on the configuration, various additional functions are offered on the machine’s control panel. Depending on the programme, you can select certain additional functions.

Symbol

Additional function

Usage

Half load

¡Switch on when there are few dishes. ¡Less detergent in the detergent
compartment than for a full load is recommended.
¡The running time is shortened.
¡The water and energy consumption are reduced
low.

Intensive Zone

¡With a mixed load of strong and switch on lightly soiled crockery, e.g. heavily soiled pots and pans in the lower basket and load normally soiled crockery in the upper basket.
¡The spray pressure in the lower basket is increased and the maximum program
temperature maintained longer. This increases
the running time and energy consumption.

VarioSpeedPlus

¡The running time depends on the dishwashing
program with 15% to 75%1shortened. ¡The additional
function can be activated before the program
start or be activated at any time during the program run. ¡Water consumption and energy consumption are being increased.

If you select this additional function, the automatic door opening is deactivated in the setting “o02”.

1Depending on the device version

Equipment

Here you get an overview of the possible equipment of your device and the way in which you use it. The equipment depends on your device variant.

22

8.1 Upper crockery basket
Place cups, glasses and small dishes in the upper basket.

EquipmentNL
4.Lower or raise the basket evenly to the desired position.

You can adjust the height of the upper crockery basket to make room for larger crockery.
Adjust the upper basket with the side handles
To wash large items of crockery in the crockery baskets, you can adjust the shelf height of the upper crockery basket. 1.Pull out the upper basket. 2.Hold the crockery basket on the
sides at the top edge to prevent the crockery basket from falling off jerkily. 3.Press the levers on the left and right on the outside of the basket inwards.

Make sure that the upper basket is at the same height on both sides.
5.Release the lever. aThe crockery basket clicks into place.
6.Push in the upper basket.
8.2 Etagere
Use the etagère and the space below to store small cups and glasses or for larger pieces of cutlery such as ladles or cutting cutlery.

If you don’t need the étagère, you can fold it up.
23

NLEquipment
8.3 Lower crockery basket
Place pans and plates in the lower basket.

8.4 Foldable plate supports
Use the foldable plate supports to safely store crockery such as plates.

Large plates with a diameter of up to 31 cm can be placed in the lower basket as shown.

You can fold down the foldable plate supports for better storage of pans, dishes and glasses.1
Fold down folding plate supports1 If you don’t need the foldable plate supports, fold them over. 1.Push the lever forward and fold
down the foldable plate supports .

1

2

1Depending on the 24

device version

2.To use the foldable plate supports again, fold them up.
aThe foldable plate supports click audibly into place.
8.5 Cutlery tray
Arrange the cutlery in the cutlery drawer.
Place the cutlery with the pointed and sharp side down.
use

Before first use

g usage
9.1 Commissioning for the first time
When using the device for the first time or resetting it to factory settings, you must make settings. Tip:Connect your device to a mobile end device. You can easily make all settings via the Home Connect app.

usageNL
Required:The device is set up and connected. .Fill with softening salt.
Fill with rinse aid.
Switch on device.
Set water softening.
.Set amount of rinse aid.
6.Fill the detergent
7.Start the program with the highest cleaning temperature without dishes. We recommend that you use the appliance without dishes before using it for the first time due to possible water stains and other residues.
Tip:You can change these settings and other basic settings change at any time.

Softening system

Hard, calcareous water leaves limescale residues on the dishes and the rinse aid container and can clog parts of the appliance. For good dishwashing results, you can soften water with the water softener and softener salt. To prevent damage to the appliance, water with a hardness of more than 7 °dH must be softened.

10.1 Overview of the water hardness settings
Here you will find an overview ight of the adjustable water hardness values. obtain this You can determine the from your local water supply company or water hardness water hardness with a w tester.

25

NLSoftening system

Water hardness °dH 0 – 6 7-8 9 – 10 11 – 12 13 – 16 17 – 21 22 – 30 31 – 50

Hardness range
soft soft average average average hard hard hard

Remark:Set the appliance to the determined water hardness. “Set water softening”,
26 With a water hardness of 0 – 6 °dH, you do not need to use softening salt for dishwashers and you can switch off the water softening. “Switch off water softening”,

10.2 Setting water softening

Set the device to the water hardness.

1.Determine the water hardness and the desired setpoint. “Overview of the water hardness settings”,

2.Press.

3.Approx. up for 3 seconds
to access basic settings.

Busy-

mmol/l

Set value

0 – 1.1

H00

1.2 – 1.4

H01

1.5-1.8

H02

1.9-2.1

H03

2.2 – 2.9

H04

3.0 – 3.7

H05

3.8 – 5.4

H06

5.5-8.9

H07

10.3 Water softener salt You can soften the water with softening salt.
Fill softener salt If the refill salt indicator lights up, refill the salt in the salt reservoir immediately before the program starts. The consumption of softening salt depends on the water hardness. The higher the water hardness level, the higher the consumption of softening salt.

NB! Dishwasher detergent can damage the water softener. Only fill the water softener tank with
softening salt for dishwashers. The rinse aid container can be corroded by softening salt for dishwashers.

aThe display shows Hxx. a

appears on the display

displayed

to give.

4.Just as often

press until

the desired water hardness is set.

The factory setting is H04.

5.To save the settings, press for

approx. 3 seconds

to press.

To ensure that any spilled softener salt is rinsed out of the rinse aid container, the softener salt must be filled into the softener salt container immediately before the program starts.

26

1.Unscrew and remove the lid of the softener salt reservoir.
2.When using for the first time: fill the tank completely with water.
3.Remark:Only use softening salt for dishwashers.
Do not use salt tablets. Do not use table salt. Put the softening salt in the softening salt tank.

Softening systemNL salt component, you can switch off the softening salt indicator. Remark To prevent damage to the appliance, only switch off the water softener in the following cases: ¡The water hardness is max.
times 21 °dH and you use a combined detergent with salt substitutes. Combined detergents with salt substitutes can only be used according to the manufacturer’s instructions up to a hardness level of 21 °dH without adding softening salt.

Completely fill the softening salt reservoir with softening salt. The water in the reservoir is displaced and flows away. 4.Fit the reservoir lid and screw it shut.
10.4 Switch off water softening
If the refill water softener indication bothers you, for example if you use a combined detergent with

¡The water hardness is 0 – 6 °dH. You do not need to use water softener salt.

1.Press.
2.Approx. up for 3 seconds
to access basic settings.

Busy-

aThe display shows Hxx. a

appears on the display

displayed

to give.

3.Just as often

press until

the display shows H00.

4.To save the settings, press for

approx. 3 seconds

to press.

aThe water softener is switched off

switched on and the salt refill

indicator is deactivated.

27

NLFinal rinse system

10.5 Regenerating the softening system
To maintain trouble-free operation of the water softener, the device regularly regenerates the water softener.

The softening system is regenerated in all programs before the end of the main wash cycle. This increases the running time and the consumption values of, for example, water and electricity.

Overview of the consumption values when regenerating the softening system
Here you will find an overview of the maximum additional running time and consumption values when regenerating the softening system.

Regenerating the softening system after x wash cycles
Additional running time in minutes
More water consumption in liters
Additional consumption of electricity in kWh

6
7 5 0.05

The consumption values stated are laboratory measured values, which are determined according to the currently valid standard and based on the Eco 50° program and the factoryset water hardness value of 13 – 16 °dH.

Final rinse system

11.1 Rinse aid
For optimum drying results, you should use the best rinse aid. Only use rinse aid for domestic dishwashers. Fill rinse aid If the rinse aid refill indicator lights up, refill rinse aid. Only use rinse aid for domestic dishwashers. 1.Press and lift the lip on the lid of the
rinse aid dispenser .
2
1
2.Top up the rinse aid up to the max mark.
max

3.If rinse aid has overflowed, it must be removed from the rinse aid container.
28

Overflowing rinse aid can lead to excessive foaming during the wash cycle. 4.Close the lid of the rinse aid reservoir.
aThe lid clicks audibly into place.

11.2 Setting the amount of rinse aid

If streaks or water stains remain on the dishes, adjust the amount of rinse aid.

1.Press.

2.Approx. up for 3 seconds
to access basic settings.

Busy-

aThe display shows Hxx. a

appears on the display

displayed

to give.

3.Just as often

to press

until the display shows the factory

set value r05.

4.Just as often

press until

the desired amount of rinse aid is

set.

At a low setting, less rinse aid is added during the wash cycle, which reduces streaks on the dishes.

At a higher setting, more rinse aid is added during the wash cycle, reducing water stains and improving drying results.

5.To save the settings, press for

approx. 3 seconds

to press.

11.3 Switching off the rinse aid system
If the rinse aid refill indicator bothers you, e.g. if you use a combined detergent with rinse aid

Dishwasher detergentNL
rinse aid component, you can switch off the rinse aid system.

Tip:The function of the rinse aid is limited in combined detergents. You will usually achieve better results by using rinse aid.

1.Press.
2.Approx. up for 3 seconds
to access basic settings.

Busy-

aThe display shows Hxx. a

appears on the display

displayed

to give.

3.Just as often

to press

until the display shows the factory

set value r05.

4.Just as often

press until

the display indicates r00.

5.To save the settings, press for

approx. 3 seconds

to press.

aThe rinse aid system is deactivated switched on and the rinse aid refill indicator is deactivated.

Detergent

12.1 Suitable dishwasher detergents Only use detergents that are suitable for dishwashers. Suitable for both non-combined and combined detergents. For optimal washing and drying results, use a non-combined detergent in combination with separate water softener salt Page 26and rinse aid
29

NLDishwasher detergent
Modern, powerful dishwasher detergents usually have a low alkaline recipe with enzymes. Enzymes break down starch and dissolve proteins. Oxygen-based bleaching agents are usually used to remove colored stains (e.g. tea or ketchup).
Remark:Follow the manufacturer’s instructions for any detergent.
Tip:Suitable detergents are available online via our website or after-sales service . tabs Tabs are suitable for all dishwashing tasks and do not need to be dosed.
With shortened programs, tabs may not dissolve completely, leaving detergent residue. This can negatively affect the cleaning effect.
Dishwasher powder Powder detergent is recommended for shortened programmes. The dosage can be adjusted according to the degree of soiling.
Liquid dishwashing detergent Liquid detergents work faster and are recommended for shortened programs without a pre-rinse phase.
It may happen that a liquid detergent that has been filled in runs out of the detergent dispenser despite the lid being closed. This is not a malfunction and is not serious if you observe the following: ¡Select only one program
without pre-rinse phase. ¡Do not make any time setting for the
program start.

The dosage can be adjusted according to the degree of soiling. Non-combined dishwashing detergent Non-combined detergents are products that do not contain any other components apart from the actual detergent. Examples of this are dishwasher powder or liquid dishwasher detergent. With powder and liquid detergent, the dosage can be adjusted to the degree of soiling of the dishes.
For better washing and drying results and to prevent damage to the appliance, it is recommended that you also use water softening salt and rinse aid to use.
Combined dishwasher detergent In addition to traditional noncombined detergents, a number of products with additional functions are offered. In addition to cleaning agent, these products also contain rinse aid and salt substitutes (3in1) and, depending on the combination (4in1, 5in1, …), additional components such as glass protection or stainless steel polish. According to the manufacturer’s specifications, combined detergents generally only function at water hardnesses of 21 °dH. If the water hardness exceeds 21 °dH, you must add softening salt and rinse aid. For optimum washing and drying results, we recommend using softening salt and rinse aid from a water hardness of 14 °dH. If you use combined detergents,

30

12.2 Unsuitable detergent
Do not use detergents that could damage the appliance or harm your health.
Hand dishwashing liquid
Hand dishwashing liquid can lead to increased foaming and damage the appliance.
Chlorinated dishwasher detergent Chlorine residues on crockery can endanger your health.
12.3 Notes on detergents
For daily use, follow the instructions regarding the detergents. ¡Detergents with the indication
thing “Bio” or “Eco” usually contain (for environmental reasons) lower amounts of active substances or some substances do not even exist at all. This may limit the cleaning effect. ¡Set the rinse aid system and the water softener to the non-combined or combined detergent used. ¡Combined dishwasher detergents according to the manufacturer’s instructions, salt substitutes can only be used up to a certain degree of hardness, usually 21 °dH, without the addition of water softener salt. For optimum washing and drying results, we recommend using softening salt from a water hardness of 14 °dH. ¡Hit dishwashing detergents with an in water-soluble protective packaging only with dry

Dishwasher detergentNL
hands and place only in a dry detergent dispenser to prevent the packaging from sticking. ¡Even when the gloss add rinse aid and the refill softener salt indicator lights up, the washing programs run smoothly when using combined detergents. ¡The function of rinse aid is limited for combined detergents. You will usually achieve better results by using rinse aid. ¡Use tabs with special drying
performance.
12.4 Filling detergent
1.To open the detergent dispenser, press the lock.
31

NLChina
2.Place detergent in the dry detergent dispenser.
50 ml 25 ml 15 ml

3.Close the lid of the detergent dispenser.

If you use tabs, one tablet is sufficient. Place tabs across the tray. When using powder or liquid detergent, follow the manufacturer’s dosing instructions and the dosing format of the detergent dispenser. With a normal degree of soiling, 20 ml 25 ml of detergent is sufficient. For less soiled crockery, a slightly smaller amount of detergent than indicated is sufficient.

aThe lid clicks audibly into place. aThe detergent dispenser is
depending on the program opens automatically at the optimum time for the program. The powder or liquid detergent is spread and dissolved in the rinse aid container. Tabs fall into the tablet tray and are dissolved in doses. Do not place any objects in the tablet tray to allow the tab to dissolve evenly.

Tip:If you use powder detergent and select a program with pre-rinse, you can also sprinkle some detergent on the inner door of the appliance.

Tableware

Only wash dishwasher-safe dishes in the appliance. Remark:Glazed crockery and objects made of aluminum and silver may discolour or fade when washed. Sensitive glass types can become dull after a few wash cycles.

32

13.1 Damage to glass and crockery

Only wash glass and porcelain that are marked as dishwasher safe by the manufacturer. Prevent damage to glass and crockery.

Cause
The following crockery not dishwasherresistant: ¡Pieces con-
plug and ser-
dirty from wood ¡Decorated
glasses, artificial
industrial dirty and vases,
and antique ser-
dirty
¡non-heatstable plastic front cast
¡China of copper and tin
¡China
that with ashes,
wax, grease and paint dirty ¡Very small pieces of serdirty
chemical saattitude of
the dishwasher detergent
part caused injury.

Recommendation
Wash only serdirty that
by the manufacturer
as a dishwasher is resistant to marked.
Use a
dishwasher detergent used by the manufacturer as a tableware is securely connected
notes.

ChinaNL

Cause
Highly corrosive alalkaline or strong
acidic
dishwasher detergent
len, especially resources for professional nal or industrial use in
combination with
aluminum front throws are not suitable for use in the dishwasher.
The water temprate of it program is too high.

Recommendation
If you use highly caustic alkaline or strong acidic the dishwasher means used
used, especially for professional
nal or industrial common use, may you no aluminum um objects in the washroom of the device places.
Choose a pro gram with laset temperature run.
Remove glass and cutlery
from the dishwasher
shortly after the end of
the programme
device.

13.2 Loading crockery
Arrange the dishes correctly to achieve optimum washing results and to prevent damage to the dishes and appliance.
Hints
¡When using the device, use less energy and water than with manual washing. ¡On our
website you will find examples of how to organize the appliance efficiently.
¡To save energy and water load the appliance to the specified number of standard place settings (standard load of crockery and cutlery). “Technical data”,

33

NLService ¡For better washing and drying results
sultates, place crockery with curves or cavities at an angle so that the water can run off.

1.Remove coarse food residues from the crockery. To save natural resources, do not pre-rinse the dishes under running water.

2.Load the dishes, observing the following:
Place heavily soiled crockery such as pans in the lower basket. The stronger spray jet gives you a better washing result.

Place dishes in a safe and stable position in the appliance to prevent damage to the dishes.

Load cutlery with the pointed and sharp side down to prevent injuries.

Place dishes with the opening

downwards, so that no water

remains.

Make sure that you do not block

the spray arms so that they can

rotate.

Le g no small objects

Hetytablet tray e and block this

bakyou not with se dishware

Hetycover of h

and dishwasher detergent

theldon’t bake to block.

34

13.3 Unload crockery
WARNING Risk of injury! Hot crockery can cause burns. Hot crockery is sensitive to impact and can lead to injury if broken. After the program has ended, let
the dishes cool down for a while before removing them. 1.To prevent drops of water from falling on the dishes, empty the dishes from bottom to top. 2.Check the rinse aid reservoir and accessories for contamination and clean if necessary. “Cleaning and maintenance”,
14 The Operation in es-
B operation
sentie
Service
14.1 Switching on the device
Press. The Eco 50° program is preset.

The Eco 50° program is a very environmentally friendly program and extremely suitable for normally soiled crockery. It is the most efficient program in terms of energy and water consumption for this type of tableware and complies with the EU ecodesign regulation.
If you do not operate the device for 10 minutes, the device will turn off automatically.
14.2 Set program
You can adjust the rinsing to the degree of soiling of the dishes by setting a suitable programme.
Press the program button. aThe program is set and the
program button flashes. aThe remaining program running time
appears on the display.
14.3 Set additional function
In addition to the selected rinsing program, you can set additional functions. Remark:The additional functions available depend on the program selected. Press the button of the desired
additional function. “Additional functions”, aThe additional function is set and the
button of the additional function flashes.
14.4 Make time setting
You can postpone the program start by up to 24 hours. 1. impressions. aThe display shows “h:01”. 2.Set the desired program start with .

ServiceNL

impressions.

aThe time setting is activated.

Tip:You deactivate the time setting by pressing repeatedly until “h:00” appears on the display.

14.5 Start program

Press

.

aThe program is over when down the display shows “0h:00m”.

Comments ¡If you want to add crockery
while the appliance is already running, do not use the tablet tray as a handle for the upper basket. This will allow you to come into contact with the partially resolved tab.
¡You can already view the running program
loan by aborting the program.

“Cancel programme”, ¡It is to save energy
appliance switches off automatically 1 minute after the end of the programme. If you open the door immediately after the program has ended, the appliance will switch off after 4 seconds.

14.6 Activate key lock

The key lock prevents the device from being operated unintentionally or improperly while it is in operation.

Approx. up for 3 seconds

to press.

aThe key lock is activated and is automatically deactivated at the end of the programme.

35

NLService aWhen the device is operated,
flashes on the display. aIn the event of a power failure, the key
blocking activated.
14.7 Deactivate key lock

2.Press. Tip:If you touch during the wash cycle
button, the running program is interrupted. When you switch on the device, the program continues automatically.

Approx. up for 3 seconds

to press.

14.8 Interrupt program
Remark:If you open the appliance door when the appliance is heated up, it is best to leave the appliance door ajar for a few minutes and then close it. In this way you prevent an overpressure from occurring in the appliance and the appliance door from springing open. 1. impressions. aThe program is saved
and the device turns off.

2.Press to continue the program.

14.9 Cancel program
To end a program early or to change a program that has started, you must cancel the active program.
Approx. press for 4 seconds.
aAll indicators light up. aOnce the indicators are off,
“0h:01m” appears on the display and the remaining water is pumped out. aThe program is aborted and is closed after approx. 1 minute.
14.10 Switch off the device
1.The instructions for safe use Page 10consider.

36

Basic settingsNL

Basic settings

You can set the basic settings of your device according to your wishes.

15.1 Overview of the basic settings
The basic settings depend on the equipment of your device.

Basic setting Water hardness

display text H041

Choice H00 – H07

Rinse aid del dosage

r051

Intensive drying d001

r00 – r06 d00 – d01

Description
Set the water softener to the water hardness. “Set water softening”, At position H00 the water softening is switched off. Set amount of rinse aid.
Switch off the final rinse system with position r00. During the final rinse, the temperature is increased, resulting in better drying results. The duration may therefore increase slightly.

Remark:Not suitable for sensitive dishes.

Hot water

A001

A00 – A01

Activate intensive drying “d01” or deactivate “d00”. Set cold water connection or hot water connection. Only set the device to DHW if the hot water is prepared energetically favorably and a suitable installation is available, e.g. a solar boiler with circulation line. The water temperature must be a minimum of 40 °C and a maximum of 60 °C.

Turn on hot water “A01” or disable “A00”. 1Factory setting (may differ depending on device type)

37

NLBasic settings

Basic setting autoOpen Dry

display text o021

Choice o00 – o02

Description
Activate or deactivate automatic opening of the appliance door during the drying phase. If the function is activated, the running time may increase. The following settings are possible:

¡When set to “o00”. opening it automatically of the door is deactivated in all programmes. ¡When
set to “o01”. opening it automatically of the door is activated in all programs.
¡When set to “o02”. opening it automatically of the door is only activated in the Eco 50°C programme.

“autoOpen Dry”

Wi-Fi

Cn0

Cn0 – Cn1

Enable or disable wireless

network connection.

At position “Cn0”, the wireless network connection is disabled. This basic setting is only available after you have connected the appliance to the Home Connect app. “Home Connect”, 1Factory setting (may differ depending on device type)

38

Basic settingsNL

Basic setting Remote Start

display text rc1

Choice rc0 – rc2

Description “Remote Start”, activate or deactivate.

The following settings are possible: ¡With the setting “rc0”, the
function permanently deactivated.
¡With the setting “rc1” you can the function is selected via the button.
“Activating Remote Start”, ¡With the setting “rc2”, the function permanently activated.

This basic setting is only available after you have connected the appliance to the Home Connect app. “Home Connect”,

Factory setting re

Start with YES To confirm of

Reset changed settings to the factory condition. The settings for the first commissioning must be specified.

1Factory setting (may differ depending on device type)

15.2 Change basic settings

Tip:Connect your device to a mobile end device. You can easily make all settings via the Home Connect app.

1.Press.
2.Approx. up for 3 seconds
to access basic settings.

Busy-

3.Just as often

to press

until the display shows the desired

setting.

4.Just as often

press until

the display indicates the desired

value.

You can change multiple settings.

5.To save the settings, press for

approx. 3 seconds

to press.

aThe display shows Hxx. aThe display shows
to give.
39

NLHome Connect

HomeConnect

H ome Connect
ome Connect
This device is network-enabled.
H
Connect your appliance to a mobile end device in order to operate functions via the Home Connect app.
The Home Connect services are not available in every country. The availability of the Home Connect function depends on the availability of the Home Connect services in your country. Information about this can be found at: www.home- connect.com. To be able to use Home Connect, you must first establish a connection to the WLAN home network (Wi-Fi1) and can be configured with the Home Connect app.
The Home Connect app guides you through the entire registration process. Follow the instructions in the Home Connect app to make the settings.
Hints
¡Take the enclosed documentation of Home Connect. ¡Also take the directions the Home Connect app.
Remark:Please observe the safety instructions in this operating manual and ensure that they are also observed when operating the appliance via the Home Connect app.
“Safety”,

16.1 Quick start with Home Connect
Connect the device quickly and easily to a mobile device. Set up the Home Connect app 1.Install the Home Connect app on
the mobile device.
2
2.Start the Home Connect app and set up access for Home Connect.
The Home Connect app guides you through the entire registration process.
Set up Home Connect
Requirements
¡The Home Connect app is on it mobile terminal device installed.
¡The device has in place of setup reception of the home network (Wi-Fi).
¡The appliance door is closed. 1.Open the Home Connect app and
scan the following QR code.

1 Wi-Fi is a registered trademark of the Wi-Fi Alliance. 2 Apple App Store and the Apple App Store logo are trademarks of Apple Inc. Google Play and the Google Play logo are trademarks of Google LLC.
40

2.Follow the instructions in the Home Connect app.
16.2 Remote Start
You can start the appliance with your mobile device via the Home Connect app. Tip:If you are in Basic Settings If you set this function to “rc2”, the function is permanently activated and you can start the device at any time with a mobile device.
Activate Remote Start If you have set “rc1” in the basic settings of this function, activate the function on your device.
Requirements
¡The device is connected to the WLAN home network connected.
¡The appliance is equipped with the Home Con-
nect app connected. ¡In the Basic Settings
this function is set to “rc1”.
¡A program has been selected. impressions.
When you open the appliance door, the function is automatically deactivated. aKey is illuminated. Tip:To deactivate the function on to press.
16.3 Personal Data Protection

Home ConnectNL
data categories to the Home Connect server (initial registration):
¡Unambiguous identification of the device ready (consisting of device keys and the MAC address of the builtin Wi-Fi communication module). ¡
Security certificate of the Wi-Fi communication module (for the information- technical security of the connection).
¡The current software and hardware version of your home appliance. ¡
Status of any previous reset to factory settings.
The use of the Home Connect functionalities is prepared during the first registration. This registration should only be carried out when you want to use the Home Connect functionalities for the first time.
Remark:Please note that the Home Connect functionalities can only be used in combination with the Home Connect app. Information on data protection can be called up in the Home Connect app.

Please observe the instructions regarding the protection of personal data. When your device connects to a home network connected to the internet for the first time, it displays the following

41

Cleaning and maintenance

17 Cleaning and maintenance
loves
Carefully clean and maintain your device to ensure that it continues to function well for a long time.
17.1 Cleaning the rinse aid container
WARNING Risk of health hazard!
The use of cleaning agents containing chlorine can lead to health damage.
Never use cleaning agents containing chlorine.
1.Remove coarse soiling in the cooking compartment with a damp cloth.
2.Pour detergent into the detergent dispenser. 3.Select program with the highest temperature. 4.Start the program without dishes.
17.4 Machine Cleaning
Deposits can lead to malfunctions in the device, e.g. due to food residues and limescale. To avoid malfunctions and to reduce the formation of unpleasant odours, it is recommended to clean the appliance at regular intervals. Machine cleaning is the right program for cleaning the machine in combination with machine care products and machine cleaners.

17.2 Cleaning agent
Use only suitable cleaning agents to clean the device. “Safe use”, P
17.3 Device Care Tips

Follow the device maintenance tips to keep the device working for a long time.

Measure
The door seal gen, the front and the operating panel of the dishwasher control moderately with a damp cloth and a little washing-up wipe medium.
The appliance door
left ajar when the dishwasher ser longer time is not used used.

Benefit
Stay because of this
these parts clean and hygienic nic.
This makes the formation of nasty smells prevent.

Tip:Our tested and approved machine care products and machine cleaners for dishwashers can be ordered via https://www.siemenshome.bshgroup.com/store or our service department. Machine cleaning is a program that removes various deposits in one rinse cycle. The cleaning is done in two stages:

42

Cleaning and maintenanceNL

Phase
1
2

Remove from
Grease and lime

Cleaning agent
liquid machinery
maintenance product or
powdered machine neon lime.

Food leftovers and Machine cleaner deposits

Placement
Interior space of it
appliance, e.g. bottle placed in the cutlery basket
hanging or powder in the interior.
Detergent dispenser

For optimum cleaning performance, the program doses the cleaners separately from each other in the respective cleaning phase. This requires the correct placement of the cleaning agents. If the Machine Cleaning indicator lights up on the control panel or the display prompts you to do so, carry out Machine Cleaning without dishes. After you have performed Machine Cleaning, the indicator goes out. If the device does not have a reminder function, we advise you to perform the machine cleaning every 2 months.

¡To achieve optimum cleaning power gen, you should pay attention to the correct placement of the cleaners.
¡Take the safety rules on the packaging of machine care products and machine cleaners.
1.Remove coarse soiling in the cooking compartment with a damp cloth.
2.Clean the sieves. 3.Place the machine care product in
the interior of the device.

Perform machine cleaning Comments ¡Run the machine cleaning program
went out without any crockery.
¡Use only for dishwashing washers suitable machine care products and machine cleaners.
¡Make sure there are no aluminum um objects, such as grease filters from extractor hoods or aluminum pans, are in the rinsing space of the appliance.
¡If you do not complete the Machine Cleaning
nen performs 3 wash cycles, the Machine cleaning indicator goes off automatically.

Only use machine care products specifically designed for dishwashers. 4.Pour the machine cleaner into the detergent dispenser until it is completely filled.
Do not put any additional machine cleaner in the interior of the appliance.

5.Press .

6.Press

.

aMachine cleaning is in progress.

aOnce the program is completed,

the machine cleaning indicator

goes out.

43

NLCleaning and maintenance
17.5 Screening system The sieve system filters coarse contaminants from the flushing circuit.
3
2

3.Pull the micro sieve downwards.

1

1 micro sieve

2

Fine strainer

3

coarse strainer

Clean sieves Contaminants from the washing water can clog the sieves.

1.Check the sieves for food residues after each wash.
2.Turn the coarse sieve counterclockwainsde the sieve system out
to take .
Make sure that no foreign objects fall into the pump reservoir.

2

4.Press the locking pieces together and remove the coarse sieve upwards .
2 1
5.Clean the sieve elements under running water. Carefully clean the dirt edge between the coarse and fine sieve.
6.Assemble the sieve system. Check whether the locking lugs of the coarse sieve have clicked into place.

1
44

7.Place the sieve system in the appliance and turn the coarse sieve clockwise. Verify that the arrow marks are aligned.

Cleaning and maintenanceNL
2.Pull the lower spray arm upwards to remove it.

17.6 Cleaning the spray arms Limescale and impurities in the washing water can block the nozzles and bearings of the spray arms. Clean the spray arms regularly.
1.Unscrew the upper spray arm and pull it downwards .

3.Check the spray arm outlets for blockages under running water and remove any foreign objects.
4.Install the lower spray arm. aThe spray arm engages audibly. 5.Fit the upper spray arm and screw
it tight.

1 2

45

Troubleshooting

8 Troubleshooting
You can rectify minor faults on the device yourself. Before contacting customer service, please refer to the troubleshooting information. This way you avoid unnecessary costs. Tip:Further information and explanations on troubleshooting can be found online by scanning the QR code in the table of contents and on our website siemens-home.bsh-group.com.
WARNING Risk of electric shock! Improper repairs are dangerous. Only trained specialist personnel may carry out repairs on the device. Only original spare parts may be used for repairing the device. If the power cord of this appliance becomes damaged, it must be replaced with
a special cord available from the manufacturer or its service agent.

Malfunction E:30-00 lights up alternately
selend.
E:31-00 lights up alternately
selend.
E:32-00 lights up alternately
selend or indication for water supply burns.
46

Cause and Troubleshooting
Aquastop system is activated. 1.Close the tap. 2.Contact the service department
Aquastop system is activated. 1.Close the tap. 2.Contact the service department
Water supply hose is kinked. Lay the water supply hose without kinks.
Tap is closed. Turn on the tap.
Tap is clogged or calcified. Turn on the tap.
The amount of water flowing in with the tap open must be at least 10 l/min.
The strainers in the water connection of the supply or AquaStop hose are clogged. 1.Turn off the device. 2.Remove the plug from the socket. 3.Turn off the tap. 4.Unscrew the water connection.

Malfunction
E:32-00 lights up alternately
selend or indication for water supply burns.

TroubleshootingNL
Cause and Troubleshooting
5.Remove the strainer from the inlet hose

E:34-00 lights up alternately
selend.
E:61-02 lights up alternately
selend.

6.Clean the strainer.
7.Place the strainer in the inlet hose. 8.Screw the water connection. 9.Check the water connection for leaks. 10.Put the plug back in the socket. 11.Turn on the device.
Water flows continuously into the appliance. 1.Close the tap. 2.Contact the service department
No device error. Water drain pump is blocked or cover of water drain pump is loose.
1.Clean the drain pump. “Clean the drain pump”,
2.Tighten the drain pump cover securely. “Clean the drain pump”,

47

NLTroubleshooting
Malfunction E:61-03 lights up alternately
selend. The water is not pumped out.

Cause and Troubleshooting
No device error. Siphon connection is still closed or the water drain hose is kinked or clogged. 1.Check the connection to the siphon and open it if necessary. 2.Lay the drain hose without kinks. 3.Remove any residue.

No device error. Water drain pump is blocked or cover of water drain pump is loose.
1.Reini gd eoff feedrpm p. “Clfeane a primingi pump,”
2.Mon k de afdekking of thedrain pOr mp go ed fixed. “afvOerclean theinpump”, Pagni a 52

E:92-40 lit off s- i Zevenz ijn dirty or clogged.

selend.

Rfinish the seven.

“Cleaening seven n”, pagie 44

48

Malfunction
All LEDs light up or flash.
Leftover food on it China.

TroubleshootingNL

Cause and Troubleshooting
Electronics has detected an error. 1.Press the main switch button for approx. 4 seconds.

The device resets and restarts. 2.If the problem recurs:
Turn off the device. Remove the mains plug from the socket or switch
off the fuse in the fuse box. Wait at least 2 minutes. Switch on the fuse in the fuse box or put the plug
in the socket. Turn on the device. 3.If the problem recurs:
Contact the service department. “After-sales service”,

Dishes are placed too close together or the basket is too full. 1.RoomyIt serv okayd met fulldoing t interspace
in.
De sprays tralreaadynd M Oeatnh eat up pervla k of the service viesgOed can n bereiknow. 2. v sorry d aano ak pyonuten.

D raye nv an thepsoarsmanmen of theObottom spray

armi sbornlOktime d.

Spacious huht sver iesg oedso in da t het crockery the

dturn of theis

prouch does not interfere.

S poreresgvgan Spraya m r andare ve rstopt. Clean the esgpgr arms

The seven zi jn vervolndion. Re inig the sevenn.
“Seven re ni igen ,”Pa afgtei r 44
49

NLTroubleshooting
Malfunction
Leftover food on it China.

Cause and Troubleshooting

There b evinden zich verwij therbare vegenon glazyn, sgwlae kmret ee n metaplease ibteenice
and cutlery.

The screens are incorrectly fitted and/or not secured.

1.Fit the sieves properly. “Sieve system”,
2.Secure the seven.

Washing program selected too weak. Choose a more powerful rinsing program.
“Programs”,

Dishes have been pre-cleaned too well. The sensor system therefore opts for a weak washing programme. Hardn ekkig vu ainl kge thee eldlton’t w t Orde nverothird. v erw idjera lland g rOvedinner res at nd ea spe l the ser-
dirtygoodd not voor.

Hogw , ssilly pieces sgaini egxpoerience in how ken unnvecessarily washed out dl. Roomy high, nararow styokkuand serviesgoed niet te
scu in en not in the corners in.

BOvenste servieskorf is right and links niet Op the same

the H eye tegnggesturel d.

DebbO venst ecrockery skorf links en recht s on the same

hi settupi

.

“Bovens et servi esbasket”,aP gina 23

The farm lheid gla nspool medium is t e hoog nigest dl. It Couple glansspoolsytseem i no p an I ageer stand.
“Hoovcellheid glansspoe lm Indeedel instAlnl “,

Er is don’tngivel ans spOelmiddel tOeg evoegd.

Do r reinse aid li

e n.

“Fill and gla nsflushing agent “, pg ina 28

Tidj ens he t prOgRammagedee letg alnspool e n his resten vatwash mdit prlesence ig. Lid an hvet dishwasher middelbakj ewedr do Or se vr iesgoebdlokk eartheand wentnopen fully.

50

Malfunction
There are removable smudges on it glasses, glassware with a metallic appearance
and cutlery.
Rust marks on it
specifications.

TroubleshootingNL
Cause and Troubleshooting 1.Arrange the dishes in the upper basket in such a way
that the tablet tray is not blocked by dishes.
“Loading crockery”, Pieces of crockery are blocking the lid of the detergent dispenser. 2.Do not place any dishes or fragrance dispenser in the tablet tray. Dishes have been pre-cleaned too well. The sensor system therefore opts for a weak washing programme. Some stubborn dirt cannot be removed.
Only remove coarse food residues and do not prerinse the dishes.
Cutlery is not sufficiently rust resistant. Knife blades are often more strongly affected by this. Use rust-resistant cutlery. Cutlery also rusts when it is washed together with rusty objects. Do not wash rusty objects. Salt content in the dishwater is too high. 1.Remove spilled softener salt from the rinse aid container. 2.Tightly close the lid of the softener salt container.

There are detergent residues inside the detergent tray or in the tablet tray.
Indication water softener
refill salt lights up.

The spray arms were blocked by dishes, preventing the detergent from being rinsed away.
Make sure the spray arms are not blocked and can rotate freely.
Detergent dispenser was damp when filling with detergent. Only put the detergent in a dry detergent
dispenser.
Water softener salt is missing. Fill softener salt bee.
Sensor does not recognize softening salt tablets. Do not use softening salt tablets.

51

NLTransport, storage and disposal
18.1 Cleaning the drain pump Large food scraps or objects can block the drain pump. As soon as the dishwater no longer drains properly, you must clean the drain pump.
WARNING Risk of injury! Sharp and pointed objects such as shards of glass can block the drain pump and cause injury. Carefully remove foreign objects. 1.Unplug the device from the power outlet. 2.Remove the upper and lower baskets. 3.Remove the strainer system. 4.Scoop out the existing water.
If necessary, use a sponge for this. 5.Lift up the pump cover with a spoon and hold it by the bracket.
6.Lift the pump cover at an angle inwards and remove it.
aNow you can turn the impeller by hand reaches.
7.Food scraps and emde objects spills at the pump aier removegoods.
52

8.Fit the pump cover and press down .
2 1
aThe pump cover clicks audibly
fixed.
9.Assemble the sieve system. 10.Insert the lower and upper baskets.
19 Transporting, hit and throw
19.1 Disassemble the device
1.Unplug the device from the power outlet. 2.Turn off the water tap. 3.Loosen the drain water connection. 4.Loosen the drinking water connection. 5.If present, loosen the fixing screws
of the furniture parts. 6.If present, remove the plinth. 7.Carefully pull the device forward,
pulling the hose along with it.

19.2 Frost-proof the device
If the device is located in a room with a risk of frost, e.g. in a holiday home, empty the device completely.
Empty the device. “Transporting the device”,
19.3 Transporting the device
To prevent damage to the device, empty the device before transport.
Remark:To prevent residual water from entering the controller and damaging the device, only transport the device in an upright position.
1.Remove crockery from the appliance. 2.Secure loose parts. 3.Turn on the device.
4.Select the program with the
highest temperature. “Programs”, 5.Start the program. 6.To empty the appliance, cancel the program after approx. 4 minutes.
“Cancel programme”, 7.Turn off the device. 8.Close the tap. 9.To remove the remaining water from the appliance, disconnect the inlet hose and let it drain.

Transport, storage and disposalNL
19.4 Disposal of your old appliance
Valuable raw materials can be reused through environmentally friendly disposal.
WARNING Risk of health hazard!
Children can lock themselves in the appliance and endanger their lives.
In the case of discarded appliances, unplug the mains cable, then cut the mains cable and damage the appliance door lock to such an extent that the appliance door no longer closes.
1.Unplug the power cord from the wall outlet. 2.Cut the power cord.
3.Dispose of the device in an environmentally friendly manner.
You can obtain information about the current disposal methods from your dealer and your municipal or district council office.
This appliance is marked in accordance with with the European directive 2012/19/EU on waste electrical and electronic equipment (waste electrical and electronic equipment – WEEE). The directive sets out the framework for take- back valid in the EU and disposal of old appliances.

53

NLService department
20 Service department
Original replacement parts that are relevant for operation in accordance with the respective Ecodesign Regulation can be obtained from our service department for a period of at least 10 years from the time of placing the device on the market within the European Economic Area.
Remark:Calling in the service department within the scope of the manufacturer’s warranty conditions is free of charge.
Detailed information about the warranty period and warranty conditions in your country can be obtained from our service department, your dealer or on our website. When you contact the service department, you will need the product number (E-Nr.), the production number (FD) and the serial number (ZNr.) of the device. Contact details for the service department can be found in the service list supplied or on our website.
20.1 Product number (E-Nr.), production number (FD) and serial number (Z-Nr.)
The product number (E-Nr.), the production number (FD) and the serial number (Z-Nr.) can be found on the rating plate of the device. The rating plate can be found on the inside of the appliance door.
To quickly find your device data and service telephone numbers, you can write them down.

20.2 AQUA-STOP guarantee
In addition to the warranty claims against the seller based on the purchase agreement and our manufacturer’s warranty, you will be indemnified if the following conditions are met. ¡If due to an error in the AquaStop
system is caused by water damage, we will compensate the damage of private users. To ensure the water protection system, the appliance must be connected to the electricity supply.
¡The liability guarantee applies to the life of the device.
¡Condition for entitlement to guarantee is that the appliance with AquaStop has been set up and connected professionally and in accordance with our installation instructions; this also includes the expertly mounted extension of the AquaStop (original accessories). Our guarantee does not cover defective supply lines or fittings up to the AquaStop connection on the tap.
¡While using a device In principle, with AquaStop you do not have to keep up or turn off the tap after use for safety reasons. Only in the event of a longer absence, for example if you go on holiday for a few weeks, should the tap be turned off.

54

Technical dataNL

21 Technical data

Weight Tension
Connection value
Fuse
Water pressure
Amount of incoming water Water temperature
Capacity

Max.: 60 kg 220 – 240 V, 50 Hz or 60 Hz 2000 – 2400W 10 – 16A ¡min. 50 kPa (0.5 bar) ¡max. 1000 kPa (10 bar) min. 10 l/min
Cold water. Hot water max.: 60 °C
14 standard place settings

You can find more information about your model on the Internet at https://eprel.ec.europa.eu/1. This web address refers to the official EU product database EPREL. Then follow the instructions when searching for the model. The model identification consists of the character before the slash of the E number (E-Nr.) on the type plate. Alternatively, you will also find the model identification in the first line of the EU energy label.

nect app: ‘Profile -> Legal information -> License information’.2You can also download the license information from the product website. (Search the product website for your device model and its documentation.) Alternatively, you can also request the relevant information from ossrequest@bshg.com or BSH Hausgeräte GmbH, Carl-Wery-Str. 34, D-81739 Munich.

21.1 Information about Free Software and Open Source Software
This product contains software components licensed by the intellectual property holders as free software or open source software.
The information about the respective license is stored in the home device. In addition, you can obtain this license information via the Home Con-

The source code will be made available to
you upon request. Send a request to this effect to ossrequest@bshg.com or BSH Hausgeräte GmbH, Carl-Wery-Str. 34, D-81739 Munich. Subject: ,,OSSREQUEST” You will be charged for the processing of your request. This offer is valid for three years from the date of purchase or at least during the period

1 Applies only to countries in the European Economic Area 2 Depending on the device version
55

NLDeclaration of Conformity

riode in which we provide support and spare parts for the device in question.
22 Declaration of Conformity
ring
BSH Hausgeräte GmbH hereby declares that the appliance with Home Connect functionality complies with the

fundamental requirements and the other applicable provisions of Directive 2014/53/EU. A detailed RED Declaration of Conformity can be found on the Internet at siemens-home.bshgroup.com on the product page of your device in the additional documents.
2.4 GHz band (24002483.5 MHz): max. 100 mW 5 GHz band (51505350 MHz + 54705725 MHz): max. 150 mW

BE BG CZ DK THE EE

IE

el

ES

FR HR IT

CY LI

LV

LT LU HU

MT NL AT PL PT RO

SI

SK FI

SE