belife S10 Cordless Vacuum Cleaner User Manual

Cordless Vacuum Cleaner
MODEL: S10

USER MANUAL

Read this instruction carefully before use.
This product complies with the applicable requirements of Directive 2014/35 / EU (repealing Directive 73/23 / EEC as amended by Directive 93/68 / EEC) and 2014/30 / EU (repealing Directive 89/336 / EEC)

SAFETY INSTRUCTIONS

IMPORTANT WARNINGS
PLEASE READ THE SAFETY INSTRUCTIONS CAREFULLY BEFORE USE AND KEEP FOR FUTURE REFERENCE .

Safety Instructions:

• This unit can be used by children from 8 years old and people with physical, sensory or mental skills o lack of experience and knowledge provided they have been placed under supervision or have received instructions for using the machine safely and that they understand the dangers.
  Children should not play with the appliance. The cleaning and maintenance by the user should not be made by children without supervision.

• This device is intended for domestic use only.

• This unit is suitable for low to medium felt back carpets.
  It is not suitable for uneven floors or mixed carpets

• Remove side brush at the under-carpet cleaning to protect the side brush.

• If the adapter’s power cord is damaged, the adapter must be discarded.

•  Recharge / battery / s only with the charger supplied by the manufacturer.

• Use the device with the battery (s) specifically created (s) for this purpose. The use of any (s) other (s) battery (s) could cause an explosion or fire
  Please use an adapter to use this product only.

• Do ot use on wet or greasy dust.

• Before use, keep fragile items (glass, light, etc.) and other. objects that could entangle the brushes(long hair, plastic bags, rope, wire, etc.).

• Do not sit on the machine and do not put heavy things on it

• WARNING: Make sure the unit can function freely in the room (it is not blocked by an obstacle, it cannot fall over) and that there is no obstacle on which the device may tip and create a risk of danger (such as lighted candies or a vase filed with water).

•  Regularly clean the vacuum cleaner.

•  Empty the dust container.

• Load the machine without using it for three months.

• Recharge only in the situation of a low power alarm or when the power is turned off. Use it after fully charged.

•  The battery must be removed from the apparatus prior to its disposal; the device must be disconnected from the mains when removing the battery.

• Do not dispose of batteries with household waste. Eliminate them in accordance with local regulations.

• Recharge the battery / the robot only with the adapter provided with the device.

• The cable of this adapter external flexible cannot be replaced; in case of damage to the cord, it is necessary to put the adapter discarded and replaced by an adapter of the same model.

• The appliance must be disconnected from the supply mains when removing the battery.

•  This battery contained in this vacuum cleaner that can not be replaced by other model of battery.
  WARNING: For charging the battery, only use the detachable supply unit provided for this appliance.

WARNING: Risk of entrapment hazard. Keep loose clothing, hair, finger, etc. away from the motorized brushes and nozzles
WARNING: the plug must be removed from the socket-outlet before cleaning or maintaining the appliance

IMPORTANT
It is forbidden to replace the power cable by yourself if damage.If the device is dropped, please ask a qualified person to check it before using it again. Internal damage could cause accidents. For any kind of problems or repairs, please contact the customer service of the local distributor, manufacturer or a qualified person to avoid danger.
Disposal And Environmental Social Responsibility
In order to be environmentally friendly, we encourage you to have your device correctly.
You can contact your local authorities or recycling centers for more information.

PRODUCT DESCRIPTION

Vacuum Cleaner

1. Li-ion Battery Pack
2. Ergonomic Handle
3. On/Off Switch
4.  Outlet HEPA Cover
5. Metal Tube Release Button
6. Aluminum Extension Tube
7.  Floor Brush Release Button
8. Motorized Floor Brush
9. Dust Tank
10. Dust Tank Release Button

Digital Display Panel

11. Battery Indicator Light
12. Max Suction Level Indicator
13. Min Suction Level Indicator
14. Adjust Suction Level
15. Brush Roller Tangled
16. Air Channel Blocked

Attachment And Accessories

Motorized floor brush: Suitable for low to medium felt back carpets and hard floors.
Long crevice tool: For cleaning the trash in the corners, gaps, baseboard edges, and other hard-to-reach places.
Dust brush tool: Use the brush to clean upholstered surfaces, keyboards, lamps, curtain, blinds, vents, etc. Perfect for cleaning hair and dust inserted on the fabric. Use the crevice portion to do the ordinary cleaning task. To switch between brush and crevice portion, press the button on the accessory and slide brush up or down.

What’s In The Package

INSTRUCTIONS TO INSTALLATION

Metal Tube Connect

1. Insert the metal tube to the main body until a click sound is heard.

2. Press the metal tube release button to remove the tube.
   
   How To Extend The Metal Tube
   

3. Press the “metal tube release button” with one hand, and hold the “ergonomic handle” with another hand, slide the track of the telescopic rod to lengthen or shorten the metal tube.

Floor Brush Installation

1. Insert the motorized brush on the end of the tube until a click is heard.
2. Press the motorized floor brush release button to remove the motorized floor brush.

How To Use The Floor Brush

1. Do Not move the motorised brush backward towards the dirt you want to pick up.
2. Moving in forward direction to pick up dirt, and then pull back along the cleaned track, and then turn slightly and push forward to continue picking the next track of dirt in ladder pattern.

If the floor brush is not able to turn free or be stuck with foreign object. Please cut off the power of brushless motor to prevent the motor from getting damaged .
Charging The Battery

How To Install The Wall Mount Dock

1. Find the wall position that needs to be punched. It is recommended to be above the ground at least 120cm.

2.  Align the “positioning holes* of positioning stickers and wall position that needs to be punched.

3. To screw “wall mount dock” onto the wall.
   

PRODUCT OPERATION

Please Charge In Time
1 When the battery’s power is less than 10% Or out of power, will flash until power off.

When the battery pack is fully charged, the indicator light on the battery pack and on the control panel will light up for 1 minute and then light off.

WARNING!

1. The battery must be fully charged for the first 3 times using.
2. Don‘*t over charge the battery for extended periods, as this may damage the battery. So unplug when not charging.
3. When the room temperature is higher than 30°C, It may take you longer time for charging.
4. When the vacuum is not in use for more than two months, the battery pack and vacuum need to be stored separately. And in order to ensure a longer service life, the vacuum cleaner needs to be charged every two months.
5. The vacuum or adapter may become hot during charging, so be sure to take the necessary precautions to avoid contacting.
6. Don Not lean the vacuum against any surface in upright position to support at any time in case of accidental slipping or falling.

Start To Work

1. Select the appropriate accessory to use according to different cleaning task.
   

2. Press the ON/OFF switch, the machine will start to work. Press it again to stop.

3. Press the speed control button to adjust 2 suction power levels.

CLEANING AND MAINTENANCE

Cleaning Frequency:

1. To maintain performance of vacuum, clean inlet HEPA, outlet HEPA and filter mask monthly or whenever airflow is weak.
2. Clean the dust cup after every use!

Dust Cup And Inlet HEPA Cleaning

1. Press the button to open the dust tank cover.

2. Lift out the filter mask by twisting count clockwise and pulling out.

3. Then separate all HEPA filters from the filter mask by twisting count anticlockwise and pulling out.
   

4. Shake to remove dust. Wash the HEPA filters under running cold water.

5. Air dry all filters completely before re-assembling.

Floor Brush Cleaning

TECHNICAL CHARACTERISTICS

TROUBLE SHOOTING

If you encounter a problem with your device or if you suspect the device is not working properly, you can make a few simple checks before calling a technician.

LED Status & Flashing Frequency| Status| Problems| Solutions
---|---|---|---
L1 and L3 flashing 5S (1HZ) at the
same time| | During Vacuuming, NTC (thermistor) failure or high temperature alarm| Continue to use it after the battery pack cool down
L1 flashes 5S (1HZ)| | During Vacuuming, discharge undervoltage (battery voltage is too low) alarm| Charge the battery with the original adapter
L1, L2 and L3 flashing 5S(1.5HZ) at the same time| | During Charging, failure of charger voltage, charging
overcurrent, charging NTC (thermistor) failure| Make sure if you are using the wrong charger
Max/Min Indicator, L1, L2, L3 flashing
5S (2HZ) at the same time| | During Vacuuming, discharge overcurrent and
short circuit during the use of the vacuum cleaner| Check the whole machine’s circuit that there is any short
circuit or replace battery pack
“Brush roller tangled” error light
is on red (1HZ)| | During Vacuuming, floor brush is clogged and there
are windings| Clean the floor brush
U-shaped “air channel blocked”
error light is on red (1HZ)| | During Vacuuming, metal tube is clogged / Suction
port is clogged / dust cup isfull| Clean the metal tube; Clean the suction port;
Clean the dust cup
Problem| Cause| Solution
---|---|---
The vacuum does not work| 1. No Power| 1 .Charging the battery pack
2. Battery Fault| 2. Replace the battery pack
3.The floor brush or filters are blocked by hair or debris|  3. Clean the floor brush and filters
The suction decreases| 1. The dust cup is full| 1.Clean the dust cup
2.The filters are blocked| 2.Clean the filters or replace the filters
3.The metal tube or floor brush is blocked| 3. Clean the metal tube and the floor brush
4. The power of battery is low| 4.Fully charged before vacuuming
The battery pack’s indicator light is off| 1. The battery pack is damaged| 1. Replace the battery pack
2. The indicator light is damaged| 2.  Replace the motor with display panel
3.  The charger does not match or the charging cable is damaged| 3. Check the charging cable or replace the charger
The floor brush does not work| 1. Blocked by hair and foreign objects| 1.Clean the floor brush
2. The floor brush is damaged| 2. Replace the floor brush
The runtime is not enough after charging| 1.The charging time is not enough| 1.Fully charged before vacuuming
2. Battery aging| 2. Replace the battery pack
3. The dust cup is full| 3. Clean the dust cup
4.The filters are filled with garbage| 4. Clean the filters
5. The metal tube or the floor brush has foreign objects| 5. Clean the metal tube and the floor brush

CAUTION:
The power brush contains electrical connections, do not immerse in water for cleaning.
Belife Is Here To Help:
Email: Belifedome@outlook.com
Customer service hotline: (+001) 401-300-0032
Hours: 9AM-5PM (CDT) WEEKDAY

WARRANTY POLICY

Disposal

The presence of this logo on the product means that disposal of 2012 on electrical and electronic equipment (WEEE).the device is governed by Directive 2012/19 / EU dated 4 July Any hazardous substance in electrical or electronic equipment can have a potential impact on the environment and health during recycling. Consequently, at the end of useful life of the device, it should not be disposed of with municipal unsorted waste.
Your role as final consumers is crucial in terms of reuse, recycling and obtaining other types of value creation from this. You have the choice of different collection systems and exchanges organized by local authorities (recycling centers) and distributors. It is your duty to use these opportunities.
In The End Of Battery Life
This appliance contains battery that are irreplaceable.
Used batteries must be supported by a selective collection system in order to be recycled thus reducing the impact on the environment. When the battery reaches its end of life, you must place it in an appropriate selective collection system that will handle its destruction and / or recycling.

• If the battery acid has leaked, avoid contact with skin, eyes and mucous membranes! The liquid that leaks from the battery can cause rashes. If acid still had to contact with skin, immediately flush the affected areas with clean water and consult a doctor immediately.
• The batteries must be installed with the correct polarity +/-.
• Do not recharge non-rechargeable batteries because of the risk of explosion.

IMPORTANT POINTS
Under no circumstances should you throw the device or battery on a public road
The warranty does not cover product wear parts, no problems or damage resulting from:

1. Surface damage due to normal wear of the product;
2. Defect or damage of product caused by contacting with liquid and due to corrosion caused by rust or the presence of insects;
3. Any incident, abuse, misuse, modification, unauthorized removal or repair:
4. Any improper maintenance operation which is not in accordance with product instructions or is connected to improper voltage:
5. Any use of accessories not supplied or approved by the manufacturer.

The warranty is void if the elimination of plate and / or the product serial number.

Love life as it is

Customer Service
**** Email: Belifedome@outlook.com
Customer service hotline: (+001) 401-300-0032
Non-U.S.customers dialing this hotline, need to add 001
Hours: 9AM-5PM (CDT) WEEKDAY

| | |
---|---|---|---
https://www.facebook.com/Belifeclean/| https://twitter.com/Belifeclean| https://www.youtube.com/channel/UCyLLagPqOglFSBjhw2AUhbQ| https://www.pinterest.com/Belifeclean/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>