Qoope 1056 2835 33SMD Turn Signal Light Instruction Manual
- June 14, 2024
- Qoope
Table of Contents
Qoope 1056 2835 33SMD Turn Signal Light
Product Information
- Product Name: 1056 2835 33SMD Turn Signal Light
- Product Specification:
- Base type: 1056 BAU15S
- Voltage: 12V-24V DC/AC
- Brake Power: 3.5W-3.7W
- Luminous Efficiency: 600lm
- Lamp Beads: 2835
- Number of Beads: 33SMD
- Size: 39.8mm*18.5mm
- Application: This light includes PY21W, 7507, 12496 base, which can be used for the following positions: Dome Light, Tail Box Light, Reading Light, Door Light, License Plate Light, and etc.
Product Usage Instructions
- Sort out all parts and accessories that will be used in lighting fixtures.
- Turn off the power before installation.
- If you are using this product as a replacement, carefully check the compliance of the product interface with the old one.
- Do not use the product incorrectly.
- Before switching on the power, ensure the voltage supply is within the allowed value.
- Carefully check all components before turning on the power.
Safety Attention
Failure to follow instructions may result in danger. Please be sure to use the
product within the operating voltage, which is quite important. It can ONLY be
connected to current DC, not AC. Connecting to AC voltage or exceeding the
maximum voltage value may cause the bulb to burn out, so please be careful in
this regard.
After-Sales Service
All products purchased from us are guaranteed to be in good repair for one
year. Any quality problems that occur within this period will be maintained or
alternatives will be provided for free. If you encounter any problems when
using our products, please feel free to contact us at any time. We promise to
help you solve them positively and in a timely manner.
Product Name:
1056 2835 33SMD Turn Signal Light
Product Specification
- Base type: 1056 BAU15S
- Voltage: 12V-24V DC/AC
- Brake Power: 3.5W-3.7W
- Luminous Efficiency: 600lm
- Lamp Beads: 2835
- Number of Beads: 33SMD
- Size: 39.8mm*18.5mm
Application
This light includes PY21W,7507, 12496 base, which can be used for the following positions:
- Dome Light, Tail Box Light, Reading Light, Door Light, License Plate Light and ect.
Installation Requirements and Maintenance
- Sort out all parts and accessories which will be used in lighting fixtures.
- Turn off the power before installation.
- If you are using this product for a replacement, please check the compliance of the product interface with the old one carefully. Do not use it incorrectly.
- Before switching on the power, please settle the voltage supply within the allowed value.
- Make sure all things have been carefully checked, and then turn on the power.
Safety Attention
- Failure to follow instructions may result in danger.
- Please be sure to use it within the operating voltage, which is quite important.
- It can ONLY be connected to current DC, not AC.
- Connecting to AC voltage or exceeding maximum voltage value may cause bulb burning out, please be careful on this.
After-Sales Service:
All products purchased from us are guaranteed to keep in good repair for one
year. Any quality problem happened within this period, we will maintain or
provide alternatives for free. If you came into any problems when using our
products, welcome to contact us at any time. We promise to help you solve them
positively and timely.