Zhejiang Qianyunli Electric Technology QJS Water Leak Detector Instruction Manual
- June 6, 2024
- Zhejiang Qianyunli Electric Technology
Table of Contents
Water Leak Detector
product instruction manual
Product Description
The water leak detector is a device that can detect water leakage and water soaking. It can monitor two states from no water to having water, water to water receding. When water leakage or water soaking occurs, it can be recorded in real-time through APP and can pass through the gateway, and other intelligent hardware products can be controlled through the linkage of the gateway device. This product is suitable for residential homes, buildings, factories, shopping malls, office buildings, etc.
- This product needs to cooperate with gateway function equipment use
Entering the Network Configuration Mode
-
Power on the product.
Insert a thin blade or coin into the slot on the battery cover and rotate it counterclockwise to open the battery cover.
Remove the battery insulation film to power on the product and close the battery cover. -
Long press the button until green indicator light flash quickly, then sensor enter network configuration state;
-
When network configuration, make sure the device as close as possible to the Gateway;
-
Open My Home Page in TuyaSmart App, click to enter the adled gatedway. select to add sub-device. Then follow the operation according to the App hint;
-
If network configuration fail, repeat to long press the device button until green light flash quickly. Repeat above operation;
Installation Instructions
Place the product in the detection area.
Technical Parameters
Product name
|
Water Leak Detector
---|---
Wireless Technology
|
Zigbee
Undervoltage Alarm
|
Supported
working temperature
|
-10°C to +55°C
Working Voltage
|
3V (CR2032 battery)
Battery Lifespan
|
More than one year (20 times per day)
Dimensions
|
50×17
Packing List
- Water Leak Detector x1
- User manual x1
- 3M sticker x1
Warranty Certificate Toxic or Hazardous Substances or Elements of this Product
Component name
| Toxic or Hazardous Substances or Elements
---|---
Lead (Pb)| Mercury (Hg)| Cadmium (Cd)| Hexavalent chromium
(Cr(VI))| Polybrominated biphenyls (PBB)|
Polybrominated diphenyl ethers (PBDE)
LED| 0| 0| 0| 0| 0| 0
PCB| x| 0| 0| 0| 0| 0
Cover and other
components
| X| 0| 0| 0| 0| 0
This table complies with SJ/T 11364.
0: indicates that the toxic or hazardous substance amount contained in all
homogeneous materials of a component does not exceed that stipulated in GB/T
26572.
X: indicates that the toxic or hazardous substance amount contained in at
least one of the homogeneous materials of a component exceeds that stipulated
in GB/T 26572.
Warranty Certificate
Warranty policy:
- If the product has quality problems within 7 days of the payment date, you can apply for a refund based on the invoice price or to replace the product with one of the same model.
- If the product has quality problems within 15 days of the payment date, you can apply to replace the product with one of the same model.
- If the product has quality problems within 12 months of the payment date, you can apply to have the product repaired.
What is not covered under this warranty:
- The product owner has no warranty certificate or the warranty service has expired.
- Damage caused by improper use, maintenance, or storage.
- Damage caused by disassembly and repair without Tuya’s authorization.
- Damage caused by force majeure.
- Normal discoloration and depreciation after the product has been used.
User Form
User information (Specify real information. Tuya promises to use the
information only for after-sales services.)
Name____
Phone number
Email____
Zip code__
Address__
Product information
Name__Model_
Color____ Product
SN___
Service____ Return 0 Replace 0 Repair
0
Fault
symptoms_
Handling
date___
Maintenance personnel
signature___
Vendor Form
User information (Specify real information. Tuya promises to use the
information only for after-sales services.)
Name____
Phone number
Email____
Zip code__
Address__
Product information
Name Model____
Color__ Product
SN__
Service Return 0 Replace 0 Repair 0
Fault
symptoms___
Handling date
Maintenance personnel signature__
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.