CoolKiller CK98 Hot Swappable Mechanical Keyboard User Manual

Table of Contents

CoolKiller-CK98-Hot-Swappable-Mechanical-Keyboard-
product

Product Name: CK 98 Mechanical Keyboard
Number of keys: 97 keys
Light: RGB light effect
Connection port: USB Type-C
Mode: Three modes
PCB: Supports hot swap
Mute cotton: Two sheets of silicone mute cotton + shaft underpad Product weight: 1300g
Product size: 39014544mm

If you are a MAC user, flip the switch to switch to a MAC system After the conversion is successful, the MAC is displayed in the lower-left corner of the default screen.
If you are a WIN user, please flip the system conversion switch to WIN After the conversion is successful, the lower left corner of the screen is WIN by default.

Connect to Bluetooth

Press fn+1/2/3 and then hold down fn+1/2/3
Put the keyboard into pairing mode,
The keyboard pairing name is CK98 5.0/CK98 3.0 Long press the 1/2/3 button and the white light will flash. After the match is successful, the 1/2/3 button will keep on for 2 seconds and restore the backlight(By default, the Bluetooth identifier is at the lower right corner of the screen.)

Connecting wire

Long press fn+5 to put the keyboard into wired mode
Long press the back 5 button and the white light will flash.
After the pairing is successful, the 5 keys will be on for 2 seconds and the backlight will be restored by default, the lower right corner of the screen is

4G Mode

Short press fn+4 and long press fn+4
Set the keyboard to 2.4G pairing mode.
Long press the back 4 buttons and the white light will flash. After the pairing is successful, the 4 keys will be on for 2 seconds and the backlight will be restored(the 2.4G logo is at the lower right corner of the screen in the default interface)

Charging status The charging indicator animation is displayed in the upper right corner of the default screen.

Lampworking current 250MA Sustainable time about 15 hours (working all the time)
Off working current 40MA Sustainable time about 80 hours (always working)
Standby current 0.5MA Standby time about 180 days
Enter standby mode. Press any key to start the keyboard and enter working mode.

To do this, the keyboard must have been paired with the device

Storage temperature: -20℃~+70℃
Operating temperature: -20℃~+60℃
Storage humidity: The relative humidity in the non-condense state is 30%-95%RH

Supported operating system: ANDROID/ISO/Win XP/Win7/Win8/Win10/MAC (default WIN system)

Reset function

Wired mode

Fn Combined Function Keys (MAC)

Fn Combination key (WIN system)

Press and hold for 3s to restore factory Settings
Multimedia Reduction in volume Volume plus mute The last song Next song Pause play stop mail

Multimedia

Web page The computer calculator

Fn Combination key (WIN system)

HOME
END
PAUSE
Backlight brightness +
Backlight brightness –
Backlight speed –
Backlight speed +
Backlight speed +
Querying the Display Information
The home screen goes to the Custom screen
INSTAGRAM: https://www.instagram.com/coolkiller_keyboard/TWITTER: https://twitter.com/coolkillerkbd
YouTube: https://www.youtube.com/@coolkillerkeyboard Email: support@coolkiller2023.com
Website: www.coolkiller2023.com
Aliexpress Store: https://www.aliexpress.com/store/1102642321
Manufacturer: Dieyun Innovation Technology Co., LTD., No. 20, Sanjiang Industrial Zone, Hengli Town, Dongguan city