Akitas V8 Handheld Cordless Vacuum Cleaner Instruction Manual
- June 14, 2024
- Akitas
Table of Contents
- Akitas V8 Handheld Cordless Vacuum Cleaner
- ATTENTION
- IUSTRATION (PART NAME)
- TECHNICAL PARAMETERS
- ACCESSORIES
- ASSEMBLY INSTRUCTION
- PRODUCT ASSEMBLY
- Charging and indication
- BATTERY CHARGING
- USED AS STICK VACUUM CLEANER
- CLEANING AND MAINTENANCE
- PROBLEM-SOLVING
- 1-Year Limited Warranty
- DISPOSAL INFORMATION
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Akitas V8 Handheld Cordless Vacuum Cleaner
ATTENTION
- To help you use this product in the correct way and protect you from unnecessary body injury and property loss, please read this instruction manual carefully before you use it. This product is for home use only; it’s not for commercial use!
- Please check carefully whether every part is in good condition upon opening the box, please do not use the product and contact the dealer or service immediately if anything is found missing or broken
- Please keep the instruction manual, invoice, package, and so on for future use storage, or repair.
- Please make sure the local power (V) is within the power range indicated on the charger
- The charger shall be placed on a dry surface, do not leave it unattended during charging Please hold the plug instead of the cord to pull the charger out from the socket, the cord should stay away from heat sources, and do not touch the charger with a wet hand
- This product is not a toy, please store this product far away from the reach of children. Special attention shall be paid when children are playing around
- Please never use this product to vacuum any liquid, heated temperature substance, very fine substance (i.e. sawdust, plaster powder, cement, ash, carbon powder),
- sharp substance (i.e. glass, staple), and hazardous substance (i.e. detergent, solvent), chemical substance (i.e. Acid), flammable substance (petrol, alcohol), Etc.
- Please cut off the power before you clean the product, please always use a dry or slightly wet soft cloth, and do not use alcohol, benzene, Etc.
- This product can’t stand itself, please apply the product body onto the holder
- Do not have the product immersed in the water, do not leave or use the product out of the house!
- Please make sure all parts are assembled correctly. Do not use this product without a filter and filter protection cover
- Do not try disassembling the battery, Do not place the battery on a metal surface or near heat sources, Do not put the battery in a fire
- Do not try disassembling or repairing this product/charger yourself, please call professionals for any repair or replacement with the original parts/unit
- Please make sure that products can no longer be used before you discard them, the battery pack must be removed from the product for further safe recycling disposal
- This product cannot be used by persons (including children) with reduced physical, sensory, or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
- This product is not for any professional and commercial use, any damage/consequence caused by improper use or use without following this instruction is not covered by warranty
IUSTRATION (PART NAME)
TECHNICAL PARAMETERS
Cleaner parameter/Charger parameter
- Model name: Handheld cordless
- VAC Charger output: 26V-500mA
- Model no.: AK V8
- Charger input: 100-240V~50/60Hz 0.5A
- Rated voltage: 22.2V —
- Charger voltage: 100-240V
- Rated power: 150W Max.
Battery Parameter
- Product’s size: 1120260270MM
- Batter: Li-ion 2200mAh
- N.W.: 2.25KG
- Working time: 23-33 min
- Box size: 750340628MM
- Charging time: 4-5H
ACCESSORIES
ASSEMBLY INSTRUCTION
Please carefully read “ATTENTION” before assembly: This product can’t stand itself, please apply the body part onto the holder which is on the connection tube
PRODUCT ASSEMBLY
- Connect the two tubes.
- Place 2 in 1 nozzle into the holder on the tube.
- Insert the aluminum tube assembly in line with the electric brush connector, with the buckle reversed.
- Connect the body with the tube. Cleaner body placed down into holder on tube
- Same as an illustration: Choose a proper place to store this product (place close to the socket is preferable)
Charging and indication
BATTERY CHARGING
- Plug in the charging plug of the power adapter at the charging port at the rear of the vacuum cleaner when it is shut down
- Apply charge to the power socket, 3 charging lights flash on during charging. When charging is done, all 3 lights keep lighting on for 3 minutes and then all off
WARNING: Do not turn on the product and do not try removing the battery while it is charging!
ATTENTION
- Only within 0°C-45°C can charging be allowed, overheating or over cold could prolong the charging time or even damage the battery
- Normal charging takes 4-5 hours, please charge fully and use the product until the battery is fully discharged 1-3 times when you initiate using it so that the battery can be fully activated.
- If this product will not be used for a long time, please charge and discharge this product once every 3 months
USED AS STICK VACUUM CLEANER
Step on the motorized brush and tilt the product backward, switch on the product and move it back and forward to start your cleaning (You may use 1pc of the tube only or 2pcs tubes connected.
ATTENTION:
- Pressing the power button, it starts “economy “mode. Pressing the “Max” button, it’s high-speed mode.
- Pressing the power button, it’s to turn off the product.
- When the battery is running out of power, the Power light on the body keeps flashing on until the product turns off itself. Please charge in time.
- The motorized roller rolls at a very high speed, to avoid damage to the cleaning surface, do not stay cleaning in the same spot too long
- The motorized nozzle has an overheating protection function which can cut off the power to the nozzle when blockage or hair twirling occurs.
- Please turn off the product, unblock it, and clean the nozzle. Do not use the product until it cools down
USED AS HANDHELD VACUUM CLEANER
- Press the release button on the hand-held vacuum cleaner, pull out the connecting pipe and the floor brush, and place them safely
- Remove the motorized nozzle and apply the 2 1 nozzle onto the end of the tube (see above illustration)
CLEANING AND MAINTENANCE
EMPTY THE DUSTBIN
Attention: Please empty the dust before it reaches the “MAX” level on the
dustbin
Turn off the power and remove the tube from the cleaner body, Aiming the dustbin at the garbage bin, push the button as the arrow indicates on the above illustration, gently sway the dustbin to empty the dust, then close back the dustbin bottom
CLEAN THE FILTRATION SYSTEM
To maximize the cleaning performance, it’s suggested to clean the filtration system after every 4-6 times using
- Turn off the power
- Press the bottom button of the vacuum cleaner, open the bottom of the vacuum cleaner, and unscrew the filter screen cover Grab the HEPA Filter and take it out
- Clean the HEPA filter, filter screen cover, and dustbin. Please make sure that all parts are assembled correctly before your use next time. * Wrong assembly would reduce suction power!
ATTENTION: Dustbin and filtration system can be washed directly with water. To clean the HEPA Filter, please just flip it and do not water wash HEPA unless it gets very dirty. Do not use the HEPA filter until it gets completely dry (naturally dry more than 24 hours) WARNING: DO NO TUSE PRODUCT WITHOUT FILTER and Filter Screen Cover
Clean the motorized nozzle
- Turn off the power and release the motorized nozzle
- Turn the button on the bottom of the nozzle by the coin to “unlock” position
- Lift up the roller and take it out Along the groove on the roller, cut off twirled hair or blockage with scissors or a knife
- Place back the cleaned roller and turn the button back to the “lock” position
UNBLOCK
This product has a protection function that can cut off the power to the
nozzle and stop it’s working when the air channel gets blocked. Please turn
off the product and unblock the nozzle or tube immediately. After unblocking,
please do not use the product until it cools down
Please refer to the “clean the nozzle” instruction for nozzle unblocking Enem,
and the ced de inside aluminum tube assembly, check and dredge
ATTENTION: Must use the original battery pack and charger Do not use the
battery pack for another purpose
PROBLEM-SOLVING
WARNING: FOR SOLVING OTHER PROBLEMS OR REPLACEMENT, PLEASE ALWAYS RESORT TO THE PROFESSIONALS SPECIFIED, ANY UNAUTHORISED REPAIRING ARE NOT COVERED BY WARRANTY
1-Year Limited Warranty
TERMS AND CONDITIONS OF YOUR Akitas 1-YEAR GUARANTEE.
- The Akitas guarantee becomes effective from the date of purchase.
- All work will be carried out by Chelsea Company Limited or their authorized agents.
- The repair or replacement of your Akitas appliance under the Akitas guarantee will not extend the period of the Akitas guarantee.
WHAT IS COVERED
- The repair or replacement of your Akitas appliance, if it is found to be defective due to faulty materials, workmanship, or function within 1 year of purchase or delivery if any part is no longer available or out of manufacture Akitas will replace it with a functional replacement part).
- This Akita’s guarantee will only be valid if the appliance is used in the country in which it was sold.
WHAT IS NOT COVERED
- Under your Akitas guarantee, Akitas shall not be liable for costs of repair or replacement of a product incurred as a result of:
- Accidental damage, faults caused by negligent use or care, misuse, neglect, careless operation, or handling of the Akitas appliance which is not in accordance with this Akitas Operating Manual.
- Use of the Akitas appliance for anything other than normal home use purposes in the country of purchase.
- Use of parts not assembled or installed in accordance with the instructions of Akitas
- Use of parts and accessories other than those produced or recommended by Akitas.
- Repairs or alterations carried out by parties other than Akitas or its authorized agents.
- Damage from external sources such as transit, weather, electrical outages, or power surges.
- Failures caused by circumstances outside Akitas’ control.
- Blockages – please refer to the illustrations and the section ‘Looking for
- Blockages’ in this Akitas Operating Manual for details of how to look for and clear blockages.
- Normal wear and tear (e.g. fuse, brush bar, etc.).
- Use of this appliance on rubble, ash, and plaster.
- Reduction in battery discharge time due to battery age or use
DISPOSAL INFORMATION
- Akitas products are made from high-grade recyclable materials.
- Please dispose of this product responsibly and recycle it where possible.
- Please note that not all parts are recyclable.
- Recycling of parts is subject to the capabilities of 3rd party suppliers.
Chelsea Company Limited
- Corylus, Buttons Way, Chalfont St
- Giles,HP8 4BP,UK
- Model: Akitas V8
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>