Wanderer 619722 Swag Extreme HD Single Instruction Manual

: June 4, 2024
: Wanderer

Table of Contents

Wanderer 619722 Swag Extreme HD Single
OVERVIEW
PARTS LIST
SET UP INSTRUCTIONS
SEASONING CANVAS
CARE AND SAFETY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Wanderer 619722 Swag Extreme HD Single

Wanderer-619722-Swag-Extreme-HD-Single-PRODUCT

OVERVIEW

Wanderer-619722-Swag-Extreme-HD-Single-FIG-1

PARTS LIST

Wanderer-619722-Swag-Extreme-HD-Single-FIG-2

SET UP INSTRUCTIONS

Wanderer-619722-Swag-Extreme-HD-Single-FIG-3

STEP 1: Choose a level firm surface, clear of any overhanging tree branches and clear of sticks, stones or any other objects that may damage the floor of your swag

STEP 2: Undo the buckles and roll out the swag. Make sure all zips are closed to keep the swag in its correct shape. Pull out the six peg points (A) of the floor firmly and secure them using pegs.

STEP 3: Take out poles D&2) and insert poles )&) through the swivel hooks (C) see picture) at the head, middle and foot area of swag. Secure ends with eyelets and attach all clips to the poles.

STEP 4: Take out poles 3 and insert two ends of poles into two (B) eyelets, and buckle up the poles to the swivel hooks (C) at the head, middle, and foot area of swag at the same time.

STEP 5: Attach guy ropes (D) to the swag and peg down.

SEASONING CANVAS

The nature of canvas means that during the manutacturing process, holes from stitching will still be open when you take the product out of the bag for the first time. All products containing canvas need to undergo a seasoning process to ensure they are waterproof for your first adventure. Follow the below steps to season your canvas product.

Set up your product as per the directions above, like you are about to use the product.
Using a bucket or garden hose, soak the canvas material paying particular attention to stitching and seams. You will notice the canvas become darker as it soaks, this is normal. Disregard water leaking through the seams, this is also normal for this step.
Once all fabric on the outside is soaked, allow the canvas to dry completely. You will notice the original color will return as it dries. A few hours will be enough in direct sun, 24 hours may be required in high humidity or overcast conditions.
Repeat steps 2 & 3 until you observe no water leaking through the seams. It you did not observe water leaking the first time, repeat from step 2 for a further 2 or 3 times.
Your canvas is now seasoned and ready to use. All stitching holes in the seams have now Swollen to become waterproof.

You may have to repeat the seasoning process if the product is left in storage tor a long period of time.

CARE AND SAFETY

Before using the swag for the first time, it is recommended to check everything is included and that you become familiar with the assembly of the swag. It is also very important to season the swag before set up. Never store the Swag wet. If swag IS wet, please take out from the storage bag as soon as possible and leave spread out to dry completely before storing away. Due to cold air outside and warm air inside the swag, condensation may form on the swag. This is a natural event. Ventilation will help minimize this.

WARNING

DO NOT use any form of flame or fuel burning appliances, heaters, candles or matches inside the swag.
DO NOT set up near open flame.
DO NOT use soap or detergent. Clean only with cold water and a brush.
DO NOT expose to petrol, oil or solvents.
DO NOT spray insecticides onto the swag.
DO NOT use this swag as a dwelling. This swag is designed as a recreational product only.

Manufactured & packaged for SRGS PTY LTD

ABN 23 113 230 050
6 Coulthards Avenue, Strathpine QLD 4500, Australia
MADE IN CHINA