Wanderer 634325 Premium Air BED Double High Queen Instruction Manual

634325 Premium Air BED Double High Queen

Product Information

• Product Code: 634325
• Model Number: 30005A-SHZJ
• Product Name: Airbed
• Intended Use: As a bed only, not for pool use or as a flotation device
• Age Restriction: Not for use by children under three (3) years of age

Product Usage Instructions

1. Inflate the airbed to desired firmness using the provided pump.

2. Use the airbed as a bed only. Do not use it for any other purposes.

3. After use, completely deflate the airbed and store it in a cool, dry place.

4. If the airbed surface is damaged, follow these steps to repair it:

1. Completely deflate the airbed.
2. Clean and dry the damaged area.
3. Apply a repair patch provided with the airbed and smooth out any air bubbles. Do not use other liquid glue or adhesive fabric.

5. Do not use the airbed if it is damaged beyond repair or if there are any signs of wear and tear.

6. Do not allow children under three (3) years of age to use the airbed as it may pose a suffocation hazard.

Warning
This bed is not a toy and should not be used as one. It is intended for use as a bed only and should not be used for pool use or as a flotation device. Failure to follow these warnings may result in injury or death.

PLEASE READ CAREFULLY TO ENSURE YOUR SAFETY

PLU: 634325 CODE: 30005A-SHZJ
DESCRIPTION: AIRBED DBL HIGH QUEEN PREM WANDERER

**INFLATED DIMENSIONS***
L203 x W158 x H49cm

**DEFLATED DIMENSIONS***
L 198 x W152cm

• Measured from top panel prior to first inflation from top seam to bottom seam and left seam to right seam.

*INFLATED CONDITIONS
Air Bed dimensions measured in a 25°C controlled, indoors environment once the air bed is fully inflated at its firmest comfort level, using a manual hand pump.
Due to the properties of PVC, this measurement is likely to vary based on your environment, inflating apparatus and desired level of mattress firmness.
We allow a tolerance of+/- 4.0% of our air bed’s dimensions when inflated under our controlled conditions.

IMPORTANT SAFETY INFORMATION AND WARNINGS

1. Adult supervision required for inflation, deflation and maintenance. Follow all safety instructions to avoid serious injury.
2. This is not a toy. Please ensure that children are under adult supervision when using this product.
3. Remove all sharp objects from area where bed will be set up and used. Bed may puncture.
4. Do not step or jump on bed or use as a trampoline.
5. Place bed in a safe area before use, making sure that there are no sharp edges, steps drops or breakable items nearby. Use on flat surfaces only. Bed may tip over on uneven surfaces.

PVC STRETCH
PVC material naturally stretches when under pressure. You may find your airbed appears to have lost some air after a nights sleep but this is not the case. During the first few uses, the PVC will stretch naturally until it reaches optimum level. When this occurs, simply top up with more air until you reach the desired level of support.

INFLATION
Place your rolled up bed on the floor or other surface free of obstructions or sharp objects. Open protective cap on valve. Use manual or powered pump with correct size adaptor. Turn pump off and replace valve cap when bed is fully inflated.

DEFLATION
Open valve cap, then roll the bed completely until all the air is expelled. When the bed is completely rolled flat replace the valve cap

CARE & MAINTENANCE

1. Check the air level of the air bed occasionally. If more than one person is using the air bed at the same time, less air may be required for comfort. Experience will suggest the best air levels.

2. In case of the velour gets wet or dirty, clean it thoroughly with soap and water before letting it air dry.
   Do not use chemicals, scouring powder or any other abrasive.

3. Avoid exposing the air bed to extreme temperatures. Inflate at room temperature.

4. Avoid over-inflating the air bed.

5. Be careful of sharp objects that can damage the outer PVC material.

REPAIRING:
If the airbed surface is damaged, use the provided repair patch.

To repair:

1. Completely deflate the airbed.
2. Clean and dry the damaged area.
3. Apply a repair patch and smooth out any air bubbles.
   Note: Never use other liquid glue or adhesive fabric, only use the repair patch like the provided on

WARNING

• This bed is not for use by children under three (3) years of age.
• Product is intended for use as a bed only. It is not a toy. It is NOT intended for pool use. It is not a flotation device.
• THIS IS NOT A LIFE SAVING DEVICE.
• Do not stand, jump or walk on the bed as it may result in personal injury or damage to the bed.
• Do not place near or against heaters, open flame or other hot objects.
• Bed may puncture. Do not place bed on abrasive surfaces or in contact with sharp or protruding objects.
• Do not use for infants or persons with limited mobility. They may roll off the mattress and become entrapped between mattress and the wall.
• This furnishing has not been evaluated for flammability or cigarette ignition resistance

PLU: 634325 CODE: 30005A-SHZJ
Manufactured and packaged for
SRGS PTY LTD
ABN 23 113 230 050
6 Coulthards Avenue
Strathpine QLD 4500, Australia
MADE IN CHINA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>