amzchef DT-5-A Meat Grinder Attachment Stand Mixer Instruction Manual

June 14, 2024
amzchef

amzchef-logo

amzchef DT-5-A Meat Grinder Attachment Stand Mixer

amzchef-DT-5-A-Meat-Grinder-Attachment-Stand-Mixer-
product

Assembly INSTRUCTION

Meat grinding accessories assembly stepsamzchef-DT-5-A-Meat-Grinder-
Attachment-Stand-Mixer-fig-1

  • Step 1: Insert the auger.
  • Step 2 Mount the cutting blade on the front of the auger. The flat, sharpened end of the cutting blade MUST be facing OUT.
  • Step 3 Mount the grinding plate in front of the cutting blade and make sure the tabs on the sides fit into the slots on the sides of the grinding head.amzchef-DT-5-A-Meat-Grinder-Attachment-Stand-Mixer-fig-2
  • Step 4 Turn and tighten the head locking screw cap.
  • Step 5 Turn off the machine and unplug.
  • Step 6 Open the cover on the machine.amzchef-DT-5-A-Meat-Grinder-Attachment-Stand-Mixer-fig-3
  • Step 7 Install the accessories to the machine and tighten it to fix it.
  • Step 8 Install the food tray.
  • Step 9 Turn on the machine and choose speed 4, it’s ready to use.

Sausage stuffing tubes assembly steps – for minced meatamzchef-DT-5-A
-Meat-Grinder-Attachment-Stand-Mixer-fig-4

  • Step 1 Insert the auger.
  • Step 2 Install the adaptor ring, make sure both sides are tight.amzchef-DT-5-A-Meat-Grinder-Attachment-Stand-Mixer-fig-5
  • Step 3 Insert the stuffing tube into and through the back of the adapter ring and push it in until it is snug, Screw the head locking screw cap onto the grinding head as shown.
  • Step 4 Install the accessories to the original juicer and install the tray.

Sausage stuffing tubes assembly steps – for chopped meatamzchef-DT-5-A
-Meat-Grinder-Attachment-Stand-Mixer-fig-6

  • Step 1 Insert the auger.
  • Step 2 Mount the cutting blade on the front of the auger. The flat, sharpened end of the cutting blade MUST be facing OUT.
  • Step 3 Mount the grinding plate in front of the cutting blade and make sure the tabs on the sides fit into the slots on the sides of the grinding head.
  • Step 4 Insert the stuffing tube and screw the head locking screw cap onto the grinding head as shown.
  • Step 5 Install the accessories to the original juicer and install the tray.

Cleaning tips

  • Do not put it in the dishwasher
  • Do not use water over 50°C to clean
  • used accessories, please soak in water for a few minutes, and then rinse clean
  • The cleaned products should be air-dried in time and kept in a dry place
  • Scan the QR code to watch the video

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals