7RYMS Rimo S1 LN Wireless Lavalier Microphone for iPhone User Manual
- June 14, 2024
- 7RYMS
Table of Contents
7RYMS Rimo S1 LN Wireless Lavalier Microphone for iPhone
Foreword
Thanks for purchasing 7RYMS 2.4G Dual-channel Wireless Microphone Rimo S1 LN.
Notice
- Due to 2.4G wireless characteristics, please keep face to face when using, and don’t turn your back to the receiver, otherwise it is easy to generate breakpoints, which is a normal phenomenon.
- Due to the characteristics of lithium batteries, the transmitter’s charging indicator will show an inaccurate battery level when the charging starts, and the actual power may be lower than the indicated power. If the transmitter runs out of power, it will take more than two hours to get fully charged.
- Please put the receiver back into the charging case with the charging port facing upwards.
- Please do not expose the product to rain or moisture, and avoid having water or other liquids spilled on it.
- Please do not use or store the product near any heat sources such as radiators, stoves, or other heat-producing appliances.
- This product is a high-precision product, please prevent it from dropping or colliding.
Main Features
- 48kHz/16bit Audio Recording, CD Level Sound Quality
- USB Digital Output, Widely Compatible with Phone & Computer
- Built-in DSP Chip, Support One-key Denoise
- USB Charging/Monitoring Port, Support Pass-through Phone Charging
- Nixie Tube Display to Monitor Battery Level in Real Time
- Rechargeable Storage Case, Operating Time Up to 16 Hours
- Low latency<20ms, Working Range Up to 50m(Open Area)
Packing ListM
Components and Instruction
Transmitter(TX):
-
Internal Mic
-
Transmitter Status Indicator:
-
Function Control Button
-
Belt Clip
-
USB-C Charging/Monitoring Port
Real-time monitor audio recorded by transmitters or connected to a power bank or DC power to charge.
It is recommended to use USB-C headphones without a DAG chip for a better monitoring experience. -
Charging Contacts
Receiver(RX):
- Lightning Plug
- Receiver Status Indicator:
- Lightning Charging Port
Connect the power bank/DC power to charge the device.
Charging Case
-
Charging Case Status Indicator
Shows the current battery level; The single digit word blinks while charging. -
USB-C Charging Port
Connect the power bank/DC power to charge the charging case. -
Charging Contacts
Usage
- Turn on and install the transmitter on the collar so that the internal mic points to the sound source.
- Attach the receiver to the Lightning devices. Choose whether to charge your device or not according to your need.
- Connect USB-C headphones to transmitter’s charging/monitoring port to monitor. Choose whether to monitor or not according to your need.
Specification
- Website : 7ryms.com
- Facebook : 7RYMS
- lnstagram : 7ryms_official
- YouTube : 7RYMS
The 7RYMS LOGO is a trademark which is registered and owned by Errun Electronic Technology Co., Ltd
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>