Gtheos C1QjqpP2IYL 2.4GHz Wireless Gaming Headphones User Manual

Gtheos C1QjqpP2IYL 2.4GHz Wireless Gaming Headphones

PACKING LIST

PRODUCT OVERVIEW

1. Mute / Answer / Hang-up
2. Light Control / Previous Track / Next Track | 2.4G-Bluetooth Mode Switching
3. Volume Control
4. On / Off Key
5. 3.5mm Audio Interface
6. Mic Port
7. Working Status Indicator
8. LED Light
9. Charging Indicator / Low
10. Battery Indicator
11. Type-C Charging Interface

CHARGING

• Step 1: Connect the Charging Cable to the Charging Port on the headset.
• Step 2: Plug the other end into a USB power source.

Charging Indicator

• Charging: the indicator shines in red.
• Fully   charged: the indicator shines in blue.
• Low voltage: the indicator flashes in red quickly, and the voice prompt sounds every 6 minutes.

Tips

1. It takes about 3 hours to reach a full charge.
2. It’s recommended to charge the headset in the power-off state.
3. When the battery of the headset gets low, the Charging Indicator will flash red and you will hear “Low Battery” from it.

MICROPHONE INSTALLATION AND OPERATION

Install the Microphone

• Step 1: Align point A on the microphone with point B on the Mic Port of the headset, then plug into the microphone.
• Step 2: Slide the Volume Control wheel to adjust the volume to a proper level.

Multi-Function Key Operation Guide

Option 1:

• Click the Mute key to mute the microphone, and then click again to turn on the microphone (it is default that the microphone is activated every time the headset is turned on).
• Double-click the Mute key to play, and double-click again to pause.
• In call mode, double-click the Mute key to answer, and double-click again to hang up, press and hold the Mute key for 2 seconds to react.

Option 2:

• Click the Light Control key to turn off the light and click again to turn on the light.
• Double-click the Light Control key to switch to the next track.
• Triple-click the Light Control key to switch to the previous track.
• Press and hold the Light Control key for 3 seconds to switch mode (2.4G mode /Bluetooth mode).

Option 3:

1. Roll the Volume Control wheel upward for Volume “+”
2. Roll the Volume Control wheel downward for Volume “-“

Option 4:

1. Toggle the power switch to ON to turn “on” the device.
2. Toggle the power switch to OFF to turn “off” the device.

Bluetooth Connection Operation Guide

Step 1 :

Toggle the power switch to the ON position, the headset turns on and enters the pairing state, and the indicator light flashes red and blue alternately (ensure that the headset is not connected to the transmitter or other Bluetooth devices).

Step 2
Turn on the Bluetooth of the mobile phone, find the Bluetooth option in Settings, and search for “Captain 300”

Step 3 :

• After successful pairing, the headset is ready for playing music or making a voice call.

Tips:

1. Please connect the headset to your mobile device within 5 minutes.
2. If you turn off the headset, it will automatically connect to the previously connected mobile device when you turn it on again.

How To Clear Pairing

• In the ON state, press and hold the Light Control key and Mute key for about 5 seconds until the headset is turned off, and the pairing record can be cleared.

USING YOUR HEADSET

2.4G/Adapter Connection

• Applicable Devices: PC/PS4/5™/Nintendo Switch™
• Step 1: Plug the USB Transmitter into the USB Port on your PC, PS4/5™/ Nintendo Switch”™ (Invalid microphone). Not support the Xbox All series.

Step 2

• Toggle the power key to the “ON” position, and the indicator light flashes red and blue alternately, plug in the adapter, the headset is automatically connected to it, and the blue light flashes slowly.

Tips:

• Before connecting the headset to the transmitter, the indicator light flashes red and blue fast and alternately, and when the headset is successfully paired, the indicator light flashes blue slowly.
• The indicator light of the transmitter changes from flashing red slowlv to shine red constanlt.

Wired Connection

• Applicable Devices : PC/Xbox ONE™ /PS4/5™/Nintendo Switch™/Mobile Devices

1. PC

2. Xbox ONE™

   • Option 1 : Xbox (Old Version)
   • Note:
   • The old version does not have a built-in 3.5mm audio jack. To connect with the Captain 300, please prepare a headset adapter (not included) by yourself.
   • Option 2 : Xbox Series X/S
   • Note:
     The new version has a built-in 3.5mm audio jack, you can connect the Captain 300 with your Xbox series s/x directly.

3. PS4/5™

   • Option 1 :
   • Option 2 :

4. Nintendo Switch™

   • Nintendo Switch’™ doesn’t support microphone input.

5. Mobile Devices

SPECIFICATIONS

TIPS AND RECOMMENDATIONS

1. Do not try to disassemble the product by yourself, please contact us for more help.
2. Do not use the product in high temperature, and near heat or fire.
3. Please use the charging cable provided to charge the product.
4. Long exposure to loud volume may cause hearing damage. It’s advised you adjust the volume to a proper level for use.
5. For your safety, it’s not recommended to wear the headset when driving as it may result in distractions.
6. Please pay attention to the surroundings when you use the product in case of potential risks.

TROUBLESHOOTING GUIDE

Q1. My Teammate Can’t Hear Me

• The connection option varies from different devices. Please make sure you have plugged in the USB Transmitter under wireless connection and the 3.5mm Audio Cable under wired connection.
• Make sure the microphone has been installed and turned on.
• Make sure the connected device is not muted.
• Please go to the sound settings of the connected device to check and verify the headset microphone has been enabled.
• Please contact us directly if this issue is unresolved.

Q2. Unable to Connect to The Transmitter

1. If the headset is in 2.4G mode (Adapter mode), plug in the transmitter to the device end, and the headset will be automatically connected with the transmitter, if not connecting automatically, press and hold the pairing button on the transmitter until the connection is successful. The light of the transmitter shines red and the light of the headset flashes blue slowly.
2. If the headset is in Bluetooth mode, press and hold the Light Control key for 3 seconds to switch to 2.4G mode of the corresponding transmitter until the light flashes red and blue fast and alternately. There will be voice prompt of “Adapter connection”. Plug in the transmitter to the device end, and the headset will be automatically connected with the transmitter. If it is not automatically connected, press and hold the pairing button on the transmitter until the connection is successful. The light of the transmitter shines red and the light of the headset flashes blue slowly.

Q3. Unable to Connect to The Bluetooth of The Mobile Phone

1. If the headset is in Bluetooth mode, make sure that the indicator light is flashing red and blue, and the headset plays voice prompt of “Bluetooth connection”. Search Captain 300 on your mobile phone and click Connect.
2. If the headset is in 2.4G mode (Adapter mode), press and hold the Light Control key for 3 seconds to switch the mode to the corresponding Bluetooth mode and ensure the indicator light flashes red and blue fast and alternately, and the headset plays voice prompt of “Bluetooth connection”. Search Captain 300 on your mobile phone and click Connect.

Q4. There Is No Sound From One Side of The Headset When Connecting with PC.

• Please insert the headset into your mobile phone to check whether it works well. If yes, please restart the PC and connect the headset with PC again.
• Please go to the sound settings of your PC to check L/R balance.
• Please contact us directly if this issue is unresolved.

Q5. The Sound Crackles or Hisses.

• Excessive static electricity may cause abnormal noises in the headset, please try to remove it.
• Other sources of interference may be too close, such as TV, refrigerator, power tools etc., please be away from them when using the headset.

WARRANTY POLICIES

1. 7*24H High-priority Customer Service [ service@customerafter-sales.com]
2. 7*24H [ Amazon Message ]
3. 12-month product warranty for quality problems + 45-day money back & return guarantee.

FCC Caution

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISEDC Warning

This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device

The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance.

CAUTION

• RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
• DISPOSE OF USED BATTERIES ACCORDING TO THE NSTRUCTIONS
• The symbol indicates DC voltage

RECYCLING

• This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on
• the environment.

NOTES:

1. High Sound Pressure.
2. Hearing Damage Risk.
3. Do Not Listen at High Volume Levels for Long Periods.

• service@customerafter-sales.com

Documents / Resources

| Gtheos C1QjqpP2IYL 2.4GHz Wireless Gaming Headphones [pdf] User Manual
C1QjqpP2IYL, C1QjqpP2IYL 2.4GHz Wireless Gaming Headphones, 2.4GHz Wireless Gaming Headphones, Wireless Gaming Headphones, Gaming Headphones, Headphones
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>