HILTI 2365084 Heli-Brick Instruction Manual
- June 14, 2024
- HILTI
Table of Contents
Heli-Brick installation
For use only for façade strengthening by professionals with support from a structural designer and verification with on site testing. Follow the local guideline for the design, distance to edge, spacing and on site testing. This information material constitutes a general set of information that is beyond the specificity and concrete characteristics of each individual work and/or construction site and/or application. Hilti South Korea performs the mere supply of the products covered by this information material and is therefore not responsible for any performance of consulting and/or design and/or execution of the works.
| Configuration | 1 | 2 |
|---|---|---|
| Base (A) | Concrete / Cement Brick / Clay Brick / Hollow Cement Brick | |
| filled with Grout / Hollow Clay Brick filled with Grout | Hollow Cement Brick / |
Hollow Clay Brick
Façade (B)| Clay Brick / Hollow Clay Brick filled with Grout| Clay Brick /
Hollow Clay Brick filled with Grout
Heli-Brick installation| |
Min. base material
thickness (hmin)| ≥ 150mm| –
Setting depth (hnom)| ≥ 50mm| –
Drilling depth (h0)| ≥ hL+ 10mm| –
Gap between wall
and facade (hG)| 50 … 150mm| –
Distance to Edge (c)| ≥ 100mm| –
Spacing (s)| Follow Local Guideline| –
Heli-Brick installation with coil and connector
