TYGOT 10 Inch Ringlight With 7 Feet Stand Instruction Manual
- June 14, 2024
- TYGOT
Table of Contents
TYGOT 10 Inch Ringlight With 7 Feet Stand
Product Information
The 10 Ringlight with 7 Feet Stand is a versatile lighting solution designed for various purposes such as photography, videography, makeup application, and live streaming. It features a ring-shaped LED light with adjustable brightness levels and light modes. The kit includes a tripod stand, phone mount, and camera mount for added convenience.
Specifications
- Powered via USB
- Requires a suitable USB source providing 5V D.C, 2A (10W)
- Ring light height: 10 inches (measured from mounting point to top of the ring)
Product Usage Instructions
Setting up the Tripod
- Take the folded tripod out of the packaging.
- Loosen the base adjustment screw.
- Use your hands to gently pull the legs outwards from the center shaft.
- Adjust the legs until they are spread wide and sit securely on the ground. Then tighten the base adjustment screw.
- Loosen the pole screws to extend the tripod to your desired height. Then tighten them once the height is confirmed.
Attaching the Phone Mount
- Screw the phone mount into the hole on the base of the ring light so that it is secure.
- Attach the phone bracket onto the mount either in portrait or landscape position. Pull the spring-loaded side of the phone mount and insert your smartphone. You may need to remove your phone case
for secure insertion into the phone mount.
Attaching the Camera Mount
- Attach the metal camera mount to the camera base first.
- Attach the camera base to the ring light mount by screwing the double-headed bolt into both the camera mount and the ring light. Tighten the base adjustment ring.
Setting up the Ring Light
- Remove the assembled ring light from the packaging.
- Loosen the bottom adjustment screw on the ring light, then attach the mount to the top of the tripod. Tighten the adjustment screw until the ring mount is secure.
- You can tilt the ring light by loosening the adjustment screw and then tightening it once the ring light is in the desired position.
- The light modes and brightness levels can be controlled using the provided remote.
User Notice
Thank you for choosing Tygot. Please read this general Instruction sheet before using to avoid any accidental damage.
-
Always ensure the locks and devices are in a safe condition to avoid accidental damage to the camera and other equipment.
-
Avoid leaving the product in high temperatures, such as in the sun for a long time or in a car near the car window for hours.
-
Keep the product out of reach of children when working in public places to prevent any accidental injuries. Use it carefully in dangerous places.
-
After using in wet, dusty, sandy, or windy conditions, it is recommended to clean and dry the tripod with a soft cloth. Remove dirt, dust, and sand from all leg locks and threads after use.
Clean with mild detergent or alcohol if necessary. -
For your own safety, do not let this product come near any electrical power source or chemical substances.
Warranty
- One year warranty service provided from the purchase date during normal use.
- A warranty card and receipt are required when you need service.
Tripod
- Take the folded tripod out of the packaging (Fig. 1).
- Loosen the base adjustment screw (Fig. 2).
- Use your hands to gently pull the legs outwards from the center shaft (Fg. 3).
- Adjust the legs until they are spread wide and sit securely on the ground. Then tighten the base adjustment screw.
- Loosen the pole screws to extend to your desired height. Then tighten once height is confirmed (Fig. 4 & 5).
Ring Light
- Remove the assembled ring light from the packaging.
- Loosen the bottom adjustment screw on the ring light, then attach the mount to the top of the tripod. Tighten the adjustment screw until the ring mount is secure (Fig. 2).
- You can tilt the ring light by loosening the adjustment screw and then tightening it once the ring light is in the desired position (Fig. 3).
- The light modes and brightness levels can be controlled on the remote
Specifications
- Powered via USB.
- Connect to a suitable USB source providing 5V D.C, 2A (10W). (USB Adaptor not included)
- Light temperature: 3400K – 5600K
The ring light is 10” high as measured from the mounting point to top of the ring.
Think, create, innovate!
Phone Mount
- Screw the phone mount into the hole on the base of the ring light so that it is secure.
- Attach the phone bracket onto the mount either in portrait or landscape position. Pull the spring-loaded side of the phone mount and insert your smartphone (Fig. 2).
You may need to remove your phone case for secure insertion into the phone mount
Camera Mount
- Attach the metal camera mount to the camera base first.
- Attach the camera base to the ring light mount by screwing the doubleheader bolt into both the camera mount and the ring light. Tighten the base adjustment ring.
User Notice
Thank you for choosing Tygot. Please read this general Instruction sheet
before using, to avoid any accidental damage.
- Always ensure the locks and devices are in safe condition to avoid accidental damage of the camera and other equipment.
- Do not use the product at temperatures less than -20°C or more than +70°C. It is not recommended to use in seawater.
- Avoid leaving the product in high temperatures, e.g in the sun for a long time or in a car near the car window for hours.
- Ensure keeping the product out of reach of children when working at the public place in case of any accidental hurt.
- Use it carefully in a dangerous place.
- After using in wet, dusty, sandy, and windy days, it is recommended to clean and dry the tripod with soft cloth.
- The dirt, dust, and sand in all leg locks, and threads, should be removed after use. Clean with mild detergent or alcohol.
- For your own safety, don’t let this product near any electrical power source and chemical substances.
WARRANTY CARD
- One-year warranty service is provided in the process of normal use from the purchase date.
- A warranty card and receipt is required when you need service.
- Our service is limited to the products of our company. （complimentary products is not included such as the packing bag）
- We don’t pay the shipping cost and any other charges such as the cost of replacement parts in the service.
- We don’t offer free service under the below situation
- No warranty card or the card was altered personally.
- No purchase date and the seller’s stamp on the warranty card.
- Any damage caused by abnormal use of artificial damage.
- Disassembled or repaired the products personally or by other companies or service people.
- Any damage caused by force majeure or abnormal use.
- We don’t pay any indirect loss of the damage， such as the expenses at the shooting， the value of the photographic equipment and mental damage compensation.
- We reserve the right to repair and change the products during warranty service time.
- Any questions about this card， please contact us.
- Please keep this card carefully anyhow we don’t give it again if it lost.
Syvo Digital Private Limited 15,Plot no.20, 2nd Floor, Road no. 42, West
Punjabi Bagh, New Delhi – 110026
Email: hello@syvo.in
Website: www.gotygot.com
Contact: 9582773073