EBL 906 LCD Display Battery Charger with Discharge Function Instruction Manual
- June 14, 2024
- EBL
Table of Contents
906 LCD Display Battery Charger
with Discharge Function
Instruction Manual
Thanks for purchasing the EBL product For safety purpose, please read this manual carefully before using it.
User Manual
Thanks for purchasing the EBL® product
For safety purpose, please read this manual carefully before using it.
General Information
Dotailed instruction is provided in this manua (the charger function, safety usage and notice.)
Features
- EBL-906 can charge 1/2/3/4 pieces AA/AAA/C/D Ni-MH Ni-CD ba- tteries and 1/2 pieces 9V Ni-MH Ni-CD batteries.
- TheLCD will display the charging progress of AA,AAA, C,D batte- ries and the LED for 9V battery.
- Controlled by MCU technology, using -AV intellectual cut-off char- ging method, automatically turn to trickle charge mode, prevent from over-voltage, over-current and reverse connection.
- Constant current charging mode would protect the battery against current fluctuation and keep using the charger safety.
- Micro computer controlled IC, automatically recognize the defective battery, short circuit battery and non-rechargeable battery. On these occasion, the charger doesn’t charge the batteries for safety.
- The charger has short circuit protection function.
- AA,AAA,C,D slot has the discharge function also, discharge the bat- tery before charging may remove the memory effect of the batteries.
- If the voltage of the battery’s voltage under 0-0.9V, the charger will renovate it automatically.
Product Specification
-
Input: 100-240V AC 50/60Hz 0.5A MAX
-
Output: DC 1.2V 1000mA AA, AAA, C, D1: 1000mA
AA, AAA, C, D2/3/4: 2000mMA DC 9V: 60mMA -
Discharge Current: 300mA-800mA
-
NoLoad Power Consumption: 0.5W Max
-
Battery Charging Rate 2 80%
-
Using Temperature: 0-35°C; Humidity: 4 80%
-
Storage Temperature: 0-25°C; Humidity: 60%
-
Working Temperature: Surface temperature of charger: 3 60°C Surface temperature of battery: = 45°C
Safety Specification
Meet the safety standard of CE
User Construction
-
Make sure the batteries are placed correctly, make the “+/-” pole of the batteries are corresponding to the “+/- “of the charger.
-
Start to charge when put the batteries into charger: the LCD disp- lay will be bright about 0.5 seconds for self-inspection, then turn off and standby for charging. (If the LCD keep flashing means the battery is non-rechargeable, not compatible or defective, please stop to charge at once.)
-
Charging AA/AAA/C/D Ni-MH Ni-CD rechargeable batteries: One LCD corresponding to one slot, when the LCD indicator shows” 8″ means the batteries have been fully charged. And the charger is individual, could charge different type and capacity compatible ba- tteries in the same time.
-
Charging 9V Ni-MH Ni-CD rechargeable batteries: the LED will a- lways keep lighting. Should to calculating its charging time, here is the formula:Capacity of 9V battery/30mA*1.2General charging time for 9V battery (for reference only): 150-300mAh about 6-14 hours
-
Discharge: Press the button to change mode, LCD screen will display
“DISCHG’ while discharging. Please note that the charger will autom- atically turn to charging mode “CHG” after the battery is discharged. -
“ERROR”: Ifthe battery is broken (0 Volt) and install battery incorrectly, the charger will shows “ERROR” to remind you personally.
Cautions
- Please install the battery into charger as the image showing in c- ase of reversing. Incorrectly installation will cause the LCD displ- ay shows “ERROR’.
- If the indicator light dose not turn on while charging, please chec- king firstly if the battery is normal and if the installation is correct.
- New battery will reach the best performance after 2-3 times char- ge and discharge.
- Charge the battery to fully if the battery is long time storage and usage firstly.
- It is normal phenomenon that the battery is warmer than room te- mperature when charging. The temperature will automatically de- crease to normal after fully charged.
- Cutting offthe power supply when you no need to charge the ba- tlery and take out the battery after fully charged.
- Children should not use this charger without adult’s supervision
Warning
- The charger can only charge for AA,AAA,C,D,9V Ni-MH Ni-CD rechargeable battery. It may cause explosion, battery broken, leakage, personal injure and damage to property if charging other type of battery.
- It may cause electric shock hazard if using the charger incorrectly.
- This charger is using for indoor only, keep it away from moist and heat.
- Please place it under the safety place where the children cannot to reach up to.
- Do not dissemble or reassemble the charger for safety reason.
Size & Weight:
SIZE | 195°93-52mm |
---|---|
Weight | 2859 |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>