ZEAL N LIFE T2 2 in 1 Wireless Dog Fence Training Collar with Remote Instruction Manual
- June 14, 2024
- ZEAL N LIFE
Table of Contents
Quick installation
N LIFE T2 2 in 1 Wireless Dog Fence Training Collar with Remote
This dog collar have
2 mode.
1:Remote Training Dog mode.
2:Wireless Dog Fence Mode
Remote Training Dog mode.
Quick Start:
Now you finish setup in Remote Training Dog mode.
Under Dog Training Mode, one transmitter can control up to 3 dogs at the same
time.
There are 3 functions could be chosen from the panel directly: Sound,
Vibration & Shock.
Vibration and Shock have 3 intense levels to adjust.
Wireless Dog Fence Mode
Quick Start:
Set a range on the transmitter, then put the receiver collar on dog’s neck.
When dogs are out of the setting range, the receiver collar will make a
warning tone – vibration and then shock to remind your dog to go back.
The receiver collar will switch to standby mode if it does not work for 5
minutes.
Make a pair:
if the collar not work you can do this.
- Press “M” Select channel
- Long Press “M” until channel number blinking.
- Long Press collar power button when hear beep sound, mean success
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>