Wantek T2L Hybrid Active Noise Bluetooth Headphones User Manual

T2L Hybrid Active Noise Bluetooth Headphones
User Manual

Schematic

Operation instructions:

1. Long press the multi-function button (MFB), the headset is turned on, and the headset enters pairing after turning on. The pairing name: T2L, turn on the Bluetooth of the mobile phone and click: T2L, click the pairing link to link the headset.

Music control:

1. MFB controls music play/pause, call answering /hanging up Rotate the encoder switch clockwise to increase the control volume, and turn the encoder switch counterclockwise to reduce the volume.
2. Press the rotary encoder switch clockwise to control the next song. and press the rotary encoder switch counterclockwise to control the previous song.
3. Long press the encoding switch and let go after hearing the prompt tone. start the voice assistant and click exit.

Lighting control:

1. Double-click the coding switch to control the turn off and turn on of the light Headphone charging
2. During charging, the LED is on, and the LED is off when fuily charged
3. Click MFB phone last digit to redial

Microphone mute control

1. The microphone boom is lifted to the top, the microphone is muted (the other party cannot hear the sound), microphone boom down, the microphone mute is cancelled, and the microphone can be used normally.
   Headphone cable use

2. It is recommended to use the headphone cable after it is turned off, so that the headphones will not consume power.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>