SKMEI 1542 Smart Watch User Manual

SKMEI 1542 Smart Watch Operation Manual

Note: Please read this operation manual carefully before using the watch!

A. Display and Button Functions
A Key: EL Backlight and Bluetooth on/off
B Key: Mode Conversion and Function Viewing
C Key: Confirm and Start
D Key: Pause and Reset
Remarks: Press A key to decrease the value, keep pressing A key can decrease value quickly Press the C key to increasing the value, keep pressing the C key can increase value quickly

B. Function Instructions

1. 14-digits timer function,normal time display week,hour,minute,second,day,month
2. 12/24 hour format setting selection (Automatically synchronize time with your phone when connected)
3. 24 hours precise 3D pedometer/calorie consumption/distance detection (The data can be uploaded to the phone when connected)
4. Sleep monitoring (Wearing the watch while sleeping, connecting to the phone the next day, you can see the sleep monitor data)
5. Alarm clock function: Timing Alarm (The alarm time can be set by APP when connected with the phone.)
6. Stopwatch: Maximum stopwatch timing 23 hours, 59 minutes, and 59 seconds
7. EL backlight, in any mode, short press A Key one time, the light will last 3 seconds.
8.  The Bluetooth function can be turned on and off (different application modes to save power)
9. Android/IOS mobile phone, Chinese and English APP, sports data, sharing with friends
10. Sports data storage function (Watch can storage 7 days sports data; APP can permanently storage motion data. You need to resynchronize the historical motion data after uninstalling and installing.
11. Synchronize the time, date, and alarm setting in your phone, instead of the cumbersome manual operations.
12.  Reminding of Call, SMS, QQ, WeChat, Twitter, Facebook, WhatsApp, Skype, and Line.
13. Take photos by remote camera
14. Find device, a mobile phone call out to watch
15. Find a phone, watch call out to mobile phone
16. Heart rate monitor

C. Operation Instructions

ON/OFF Mode

Bluetooth ON/OFF Mode

How to check the current day sport data

REMARKS

• Current Date Means every day 0:00 am-23:59 pm
•  The 24H pedometer function ON by default when the watch boot and the first 11 steps generally can not be detected, which will be allowed for deviation, not record in the pedometer device.

Alarm Setting Mode

Remarks:

•  When reaching to preset alarm time, it will beep for the 20s, and “Alarm” will flashing for 20s (when the alarm went off, can press any key to exit )
• Switch to alarm interface, press the C key to close or open the alarm

Chronograph Setting Mode

Remarks:

• The maximum chronograph time is 23:59’’59.99’, the first 23’’59.99′ accurate to milliseconds, then accurate to second.
• If the record runs up to the maximum, the stopwatch will start recording from zero again.
• If the stopwatch is running and hasn’t been reset, while the switch to another function mode, the stopwatch will run continually in the backstage.

Time and 12/24 Hours Setting

Remarks:

• In any setting mode of time and 12/24H, press the B key to save the current setting and return to normal time display (Bluetooth Off)
• In any setting mode, it will return to the normal time display automatically if without any operation more than 5s (Bluetooth Off)

Calendar Setting

Remote Camera Setting:

After connected the watch with the phone via Bluetooth, turn on the phone’s camera, the photo icon on the watch will flash,

Heart Rate Monitor

Remarks:

•  When detecting the heart rate, keep the watch as static as possible
•  Detect the heart rate needs 15s
•  This test value is only for preliminary reference

D. App Operation Instructions

1.1) Android App Installation (Android phone with HUAWEI V10 as an example)
Download the “HMate” App, click to “install”, When downloading successfully, open it will pop up “HMate want to open the Bluetooth ”, click “allow”;
After that will pop up “need to open location service to search for Bluetooth device ”, then click “more setting” like following, convert to the phone’s “Location Access” interface, open the button of “Access my location”.

1.2) IOS App Installation

• Input keyword “HMate” on APP Store, then download & install the APP
• iPhone/IPAD scan QR CODE of following APP store (IOS) Version

APP Connection

Open the App, click the “menu” button in the upper left corner of the main interface, then click “Smart Module List”, into the setting interface; put the watch close to the phone, when appearing the watch Bluetooth name,
Click the device name, then it will connect App;
Go back to the home interface, will see the interface shown “connected”, and the battery will show out, which means the watch is already connected to the App.

oted: after the iPhone is connected to the device, will pop up “Bluetooth Pairing Request”, just need to click “pair”, like the following pic.

Find Device

Click the menu button on the main interface, click “Find Smart Module”, the watch will make “Beep” voice.

Find your phone

When connecting the watch with the phone, press the C key for 3 seconds, the phone will make the sound of “I’m here.”
Note:

1. Make sure the phone’s media sound is on
2. The phone and watch are connected
3. iPhone doesn’t have this function currently

Remote camera

Click the “Menu” button on the top left corner of the main interface, then click “Camera” to enter the photo mode. The photo icon on the watch will flash, and shake the watch to take a photo.

Clear data

Click the “Menu” button on the top left corner of the main interface, click “Clear Data”, the “This will clear all data” dialog will pop up, click “OK”, after the data is cleared, it will prompt “Clear device data successfully”.

Note: The function of “Clear Data” will clear the historical data saved in the APP and watch. Please use it cautiously.

 Health test(Heart rate detection)

Click the “Menu” button on the top left corner of the main interface, click “Health test”, enter the “Static heart rate detection” interface, then click the “Static heart rate detection” button to start the test. The whole test process is about 15 seconds.

Note: There are two ways to test heart rate (Keep wrist and watch static during the test)

1. After adjusting the watch to the heart rate test interface, press the C key to start the test (this test way can be connected to the APP or not)
2. After connecting the watch with APP, click “Health test” to test the heart rate on the APP.

 Personal setting

Click the “Menu” button on the top left corner of the main interface, click “More settings”, and click “Personal Settings” to enter the “Personal Information” setting interface. After setting the personal information, the sleep start and end time, click “Synchronize your Smart Module”.

 Reminder setting

Click the “Menu” button on the top left corner of the main interface, click “More settings”, and click “Reminders”, the “HMate Reminder” dialog will pop up, click “OK” enter the phone “Notification access”, open the HMate button, will pop up “Enable HMate Reminders”, click “Allow”. Then return to the APP, open the APP button that needs reminding.

REMARKS:

If APP doesn’t remind, please check the following five points:

1. Make sure Bluetooth is connected.

2. Make sure that the computer doesn’t log in to QQ, WeChat, etc., if the computer logged in, the phone will not remind.

3. Make sure that QQ, WeChat is quiet to run in the background if in the current chat interface there is no reminder.

4. Make sure that QQ, WeChat, Facebook, etc. are open to allow notifications, please confirm as follows:
   In phone settings, find “Apps” and choose QQ, WeChat, Facebook, Twitter, etc. that need to be reminded, click each item to set. Click “Notifications” – “Allow notifications”

5. If the IOS phone doesn’t have a reminder function, please confirm whether the“Bluetooth Pairing” dialog pop up when connecting the watch with APP. If the dialog does not pop up, you need to quit the APP and reconnect the watch to ensure that the “Bluetooth Pairing” dialog pops up.

 Synchronize data and view historical and sleep data

Click the current step number of the main interface to synchronize the data on the device to the mobile phone. (if there are more data to be synchronized, the synchronization time also will longer, please wait patiently for this process)

 Sports sharing

Click the share button on the top right corner of the main interface to share the sports.

About (APP)

Click the”Menu” button on the top left corner of the main interface, click”About” to see the current software and firmware version information.

E.APP download

| |
---|---|---
http://qr03.cn/EY5hVq| http://qr03.cn/C6HPrN| http://qr03.cn/FNXly

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>