dji Matrice 350 RTK Ultimate Tool for the Commercial Drone User Guide

Matrice 350 RTK Ultimate Tool for the Commercial Drone

Matrice 350 RTK Quick Start Guide

Matrice 350 RTK

The MATRICE TM 350 RTK (M350 RTK) is a powerful industrial drone platform with an advanced flight controller system, 6 Directional Sensing and Positioning system and FPV camera. To enhance reliability and safety, it also supports CSM Radar – an additional obstacle detection component that can be mounted on top of the drone. It features several advanced flight functions including return- to-home, obstacle sensing, AI spot-check and more.The built-in AirSense provides awareness of nearby aircraft within the surrounding airspace to ensure safety.
Its airframe design gives it an IP55 Ingress Protection, in accordance with the global IEC 60529 standard. The mechanical design, along with quick-release landing gears and mounted folding arms, makes it easy to transport, store, and prepare for flight. The safety beacons on both the top and the bottom of the aircraft allow the aircraft to be identified at night or in low light conditions. The auxiliary lights help the vision positioning system achieve better performance at night or in low light conditions, improving aircraft takeoff, landing and flight safety.
M350 RTK is compatible with many of DJI’s DGC2.0 connector gimbals, supporting multigimbal system, which can support up to three independent gimbals to meet the needs of different scenarios.
It is equipped with many expansion ports to broaden its applications. The M350 RTK has a built-in DJI TM D-RTK TM 2, which provides more accurate heading data for positioning. An advanced power management system along with dual batteries ensures power supply and enhances flight safety. Without a payload, the M350 RTK has a flight time of up to 55 minutes.

1. FPV Camera
2. Forward Infrared Sensing System
3. Forward Vision System
4. DJI Gimbal Connector v2.0 (DGC2.0)
5. Gimbal Detachment Button
6. Frame Arms
7. Motors
8. Propellers
9. ESC LEDs
10. Transmission Antennas
11. Landing Gears
12. Air Filter
13. Left and Right Infrared Sensing System
14. Left and Right Vision System
15. Intelligent Flight Batteries
16. Battery Level Indicators
17. Battery Level Button
18. D-RTK Antennas| 19. Aircraft Status Indicators
20. Upward Beacon
21. Power Button / Indicator
22. Upward Infrared Sensing System
23. Top Auxiliary Light
24. Upward Vision System
25. Debugg Port
26. Accessory Port
27. Accessory Port
28. Downward Infrared Sensing System
29. Downward Vision System
30. Bottom Auxiliary Light
31. Downward Beacon
32. Backward Infrared Sensing System
33. Backward Vision System
34. Battery Locker
35. Gimbal and Camera
---|---

DJI RC Plus

The DJI RC Plus remote controller features O3 Enterprise, the latest version of DJI’s signature OCUSYNC TM image transmission technology, and can transmit a live HD view from the camera of an aircraft to display on the touchscreen. The remote controller comes with a wide range of functional buttons as well as customizable buttons, which can easily control the aircraft and operate the camera. The remote controller has a protection rating of IP54 (IEC 60529). The built-in 7.02 inch high brightness 1200 cd/m 2 screen boasts a resolution of 1920×1200 pixels. The Android operating system comes with a variety of functions such as GNSS, Wi-Fi, and Bluetooth. The remote controller supports 65W fast charging and has a maximum operating time of 3 hours 18 minutes with the internal battery and up to 6 hours when used with an external WB37 intelligent battery.

1. External RC Antennas
2. Touchscreen
3. Aircraft Authority Button
4. Control Sticks
5. Internal Wi-Fi Antennas
6. Back/Function Button
7. L1/L2/L3/R1/R2/R3 Buttons
8. Return to Home (RTH) Button
9. Microphones
10. Status LED
11. Battery Level LEDs
12. Internal GNSS Antennas
13. Power Button
14. 5D Button
15. Flight Pause Button
16. C3 Button (customizable)
17. Left Dial
18. Record Button
19. Flight Mode Switch
20. Internal RC Antennas
21. microSD Card Slot| 22. USB-A Port
23. HDMI Port
24. USB-C Port
25. Focus/Shutter Button
26. Right Dial
27. Scroll Wheel
28. Handle
29. Speaker
30. Air Vent
31. Reserved Mounting Holes
32. C1 Button (customizable)
33. C2 Button (customizable)
34. Rear Cover
35. Battery Release Button
36. Battery Compartment
37. Rear Cover Release Button
38. Alarm
39. Air Intake
40. Dongle Compartment
41. M4 Threaded Holes
---|---

Using Matrice 350 RTK

1. Charging
Charging the TB65 Batteries and WB37 Batteries
a. Connect the battery station to a power outlet using the AC power adaptor cable.
b. Press the power button once to power on the BS65 battery station.
c. Insert the TB65 batteries and WB37 battery (excluded) into the battery ports to start charging.
Charging the DJI RC Pro
Connect the battery station and the remote controller USB-C ports using a USB-C to USB-C cable to activate and charge the internal battery.
2. Preparing the Remote Controller
Check battery level: press once.
Power on/off: press and then press and hold for two seconds. The remote controller needs to be activated before using for the first time. Follow the prompts to activate.
Adjusting the Antennas Lift and adjust the antennas. The strength of the remote controller signal is affected by the position of the antennas. Adjust the direction of the external RC antennas and make sure their flat side is facing the aircraft, so that the controller and aircraft are within the optimal transmission zone.
3. Preparing the Aircraft
Installing the Landing Gears
Install the landing gears, slide the gear lock to the end of the landing gear, then rotate it about 90° until the dot is in sync with the alignment markUnfolding the Aircraft
Remove the two propeller holders. Unfold the frame arms on both sides in the same way.Lock the frame arms and unfold the propellers.Mounting the Gimbal and CameraMounting the Intelligent Flight Batteries
Insert a pair of batteries.
Press the battery level button once to check the battery level.
Turn on / off: Press the power button on the aircraft, within 3 seconds press again and hold to turn on / off the aircraft, with the power indicator solid on.
4. Flight
Before taking off, make sure the Aircraft Status Bar in the DJI Pilot app displays “Ready to Go (GPS)” or “Ready to Go (RTK)”.

Manual Takeoff / Landing
Combination Stick Command to start / stop the motors.
Stowly push the left stick up to take off, (Mode 2)
Stowly push the left stck down unbi the aircraft lands. Hold for a few seconds to stop the motors.
The default fight control is known as Mode 2. The teft stick controis the ascraft’s altitude and heading, while the night stick controts its

Specifications

Aircraft（Model: M350 RTK）

5.8 GHz: <28.5 dBm (FCC), <12.5 dBm (CE), <28.5 dBm (SRRC)
5.1 GHz: <23 dBm (FCC), <20 dBm (CE)
GNSS| GPS/BeiDou/GLONASS/Galileo

Intelligent Flight Battery

Remote Controller（Model：RM700B）

O3 Enterprise
Operating Frequency| 2.400-2.4835 GHz; 5.725-5.850 GHz
Transmitter Power (EIRP)| 2.4GHz: ＜33 dBm (FCC), ＜20 dBm (CE/SRRC/MIC)
5.8GHz: ＜33 dBm (FCC), ＜14 dBm (CE), ＜23 dBm (SRRC)
Wi-Fi
Protocol| WiFi 6
Operating Frequency| 2.400-2.4835 GHz; 5.150-5.250 GHz; 5.725-5.850 GHz
Transmitter Power (EIRP)| 2.4GHz: ＜26 dBm (FCC), ＜20 dBm (CE/SRRC/MIC)
5.1GHz: ＜26 dBm (FCC), ＜23 dBm (CE/SRRC/MIC)
5.8GHz: ＜26 dBm (FCC/SRRC), ＜23 dBm (CE)
Bluetooth
Protocol| Bluetooth 5.1
Operating Frequency| 2.400-2.4835 GHz
Transmitter Power (EIRP)| ＜10 dBm

FCC Compliance Notice
Supplier’s Declaration of Conformity
Product name: Matrice 350
Model Number: M350 RTK
Responsible Party: DJI Research LLC
Responsible Party Address: 435 Portage Ave, Palo Alto, CA 94306
Website: www.dji.com
We, DJI Research LLC, being the responsible party, declares that the above mentioned model was tested to demonstrate complying with all applicable FCC rules and regulations.
This device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information
For purposes of this section, a portable device is defined as a transmitting device designed to be used so that the radiating structure(s) of the device is/are within 20 centimeters of the body of the user.
The aircraft complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm during normal operation. This transmitter must not be co- located or operating in conjunction with any other antenna or transmitter.
ISED Compliance Notice
CAN ICES-003 (A) / NMB-003(A)
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions: (1)This device may not cause interference.(2)This device must accept any interference, including interference that may cause undesired operation of the device.
The aircraft complies with RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
KC Compliance Notice
NCC Compliance Notice
EU Compliance Statement:
SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device (MATRICE 350) is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU.
A copy of the EU Declaration of Conformity is available online at www.dji.com/eurocompliance
EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device (MATRICE 350) is in compliance with the essential requirements and other relevant provisions of Radio Equipment Regulations 2017.
A copy of the GB Declaration of Conformity is available online at www.dji.com/eurocompliance

References

• Anatel — Agência Nacional de Telecomunicações
• DJI - Official Website

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>