soundcore A3992RC Life Dot 3i Noise Cancelling Earbuds User Guide
- June 14, 2024
- Soundcore
Table of Contents
Soundcore Life A3i
Quick Start Guide
A3992RC Life Dot 3i Noise Cancelling Earbuds
Model: A3992, A3992LC, A3992RC 51005003900 V01
For FAQs and more information, please visit :
soundcore.com/support
SUPPORT
For FAQs, detailed user manual and more information, please visit www.soundcore.com/support
APP
http://dl-
soundcore.soundcore.com/qcdl?flow=soundcore
Download the Soundcore App to customize the user interface (e.g. adjust
volume, control playback, activate Siri), adjust EQ, switch ANC modes, update
firmware, and explore more.
FIRMWARE UPGRADE
Ensure the earbuds are placed in the
charging case and the case remains open until the firmware upgrade is
completed.
AMBIENT SOUND
Switch ANC/Transparency/Normal modes in
the Soundcore App.
- ANC (Active Noise Cancellation): Reduce unwanted background noise.
- Transparency: Stay aware of your surroundings while listening to music.
WEARING
Choose the EarTips that fit
your ears best.
CHARGING
Fully dry off the USB
charging port before charging.
Use a certified USB-C charging cable to prevent any damage.
POWERING ON/OFF
Open the charging case, the
earbuds will automatically power on.
To power off, place the earbuds in the charging case and close it.
PAIRING
Remove the protective film
from the earbuds, put them back in the case, and close the lid. Open the
charging case, the earbuds will automatically enter Bluetooth pairing mode.
Select “Soundcore Life A3i” on your device’s Bluetooth list to connect.
DUAL CONNECTIONS
There are
two ways to connect the earbuds with two Bluetooth devices at the same time.
- In the Soundcore app, go to settings and select Dual Connections > Connect New Device.
- Alternatively, wear the earbuds, then press and hold the button on both earbuds for
- seconds simultaneously. You can then connect to the earbuds from your second device’s Bluetooth settings.
MANUAL PAIRING
To manually enter
Bluetooth pairing mode, place the earbuds in the charging case and leave the
case open, then press and hold the button on the case for 3 seconds until the
LED indicator on the charging case flashes white.
CONTROLS
x1: Press once
x2: Press twice
2s: Press and hold for 2 seconds
x1: Press once
x2: Press twice
2s: Press and hold for 2 seconds
RESET
Reset if the earbuds cannot properly
pair with each other or with other devices.
Place the earbuds in the charging case and leave the case open. Press and hold
the button on the case for 10 seconds until the LED indicator on the charging
case flashes red 3 times . This confirms that the reset was successful and
your earbuds can be connected normally.
LED LIGHT GUIDE
Steady white
Steady red
Flashing white
Flashing red
TIPS
- Bluetooth Pairing : For some smartphones, you may be requested to re-confirm the pairing on a pop-up window after you have selected “Soundcore Life A3i” to pair.
- Breaking Bluetooth Connection: Turn off your Bluetooth device and turn it on again. Remove “Soundcore Life A3i” from your device’s Bluetooth list.
- Reset: If you try to reset the earbuds, make sure that the earbuds are being charged in the case and leave the case open.
Customer Service
18-month limited warranty
Lifetime technical support
Our warranty is additional to the legal rights consumers have buying this
product.
service@soundcore.com
support.mea@soundcore.com (For Middle East
and Africa Only)
support@anker.com
+1 (800) 988 7973 (US/Canada)
+44 (0) 1604 936200 (UK)
Input: 5V 0.5A
Charging time: 2 hours
Playtime (varies by volume level and content):
ANC off: Up to 10 hours (Up to 40 hours with the charging case)
ANC on: Up to 8 hours (Up to 32 hours with the charging case)
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
The following importer is the responsible party (contract for EU and UK
matters)
Anker Technology (UK) Limited
GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom
Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3, 80807 Munich, Germany
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Innovations Limited is under license.Other trademarks and trade names are those of their respective owners.
FCC ID: 2AOKB-A3992LC
IC: 23451-A3992LC
210-209378
FCC ID: 2AOKB-A3992LC
IC: 23451-A3992LC
210-209378