ushilife IOS10 Wireless Car Play Adapter Instruction Manual
- June 14, 2024
- ushilife
Table of Contents
Professional Manufacturer of car Internet Products.
Focus Wireless Car Multimedia Device.
If you would like to download the manual in the following
languages, please go to：www.ushilife.com
Carplay projector
Original wired to wireless CarPlay
Instructions for use
LOOKING FOR DISTRIBUTOR
More than 30 years of automotive service provider, own factory, with R & D design capabilities, support OEM, sincere recruitment of global distribution agents, welcome to call to discuss cooperation.
Company: GUANGZHOU USHI AUTO PARTS CO.,LTd.
Address: Floor 1-3, No. 30-2, Lane 1, Wanggang East
Street, Fenghuang Street, Yushatan, Tianhe District,
Guangzhou City, Guangdong Province,China
If you have any questions, please contact customer service.
Product Features
Change the original wired CarPlay connection method, say goodbye to the data cable connection, wireless transmission brings more convenient connection experience, you use Apple CarPlay, enter the driver’s compartment automatically connected.
Product specification parameters
-
Power input: 5V 1~2.1A
Power output: DC 5V 0.8-2A
Adaptive resalution: adaptive -
Product power consumption: 0.15W Product connection method
-
Plug the Carplay projector into the USB /type-C interface of the car display.
iPhone for wireless connectivity
Use of iPhone (wireless Bluctooth connection)
-
Connect the Carplay projector o the car display USB port, click Active Search, turn on the phone WiFi and Bluctooth.
-
Click the Bluctooth signal of the cell phone on the car display, Sélect pairing on the phone, you can use Apple CarPlay, to achiove wireless connection.
Note: Ifthe above method
can not be successfully connected, you can open your phonc’s WiFi and
Bluctooth, scarch for the Bluctooth name shown on the display side of the car,
and directly click to connect.
Online upgrade method
Connet your iPhone to the Carplay projector WiFi, enter 192.16850.2 in Safari browser (only support English, Simplified Chinese, Traditional Chinese 3 languages). you can enter the following interface.
Note: iPhones need to be connected to mobile data in order (t0 open the Safari browse.
- Yo can check whether it is the latest version
- You can upgrade the aest version online.
List Management
- Selet your phone in the list to connect
- Long press the list to delete the phone pairing record
Cloud log upload function description
Connet your iPhone to the Carplay projector WiFi, enter 192,168 30.2 in Safar browser (only support English, Simplified Chinese, Traditional Chinese 3 languages), you can cnter the following interface.
Note: iPhones need to be connected to mobile data in order t0 open the Safari browser.
Note: Firstly, state the make, model and fault phenomenon of the car with the problem, Click OK and upload the log.
- Open the log as above, unplug the Carplay projector from the car display, plug them into the car display USB port again, and then reconneet the phone.
- After re-operation of the fault, you can upload the log in the cell phone.
- After clicking Upload Log, enter the information related to the problem in the pop-up bo.
This document
was updated on March 17, 2022