Bestzon YC-SW8014-PIR Solar Motion Sensor Light User Manual

Table of Contents

Solar Motion Sensor Light
User’s Manual

Model No.: YC-SW8014-PIR

Solar panel	Polycrystalline silicon 5.5V 0.55 W
Battery	Lithium 18650 3.7 V 1200 mAh
Light Source	SMD 412 piezas LED
Size	11611355 mm
Weight	0.15 KG
Housing material	ABS
Working time	8-10 hours
Charging time	4-5 hours under direct sunlight
Sensor mode	Motion sensor & Dim light & Light sensor

Choose a place that make sure the solar panel can absorb sunlight(within 3 meters height).
Intsall standard plastic screws into wall, then using metal screws fix LED solar sensor light.

When it not lit

Confirm switch is on or not.
Confirm whether it is being continuously used in a long-term and no charge, recharge it timely before use again.
Make sure people moving within the sensing range.
Make sure the solar sensor light being installed within 3 meters height.
Confirm installation direction is correct (solar panel should be facing up).
Confirm no objects blocking it and solar panel can receiving sunlight.

Easy to install it on walls. trees, metal and glass.
Using grade A+ battery cells, large capacity, long standby time.
Intelligent sensing system provides overcharge, over voltage, short circuit and more security protection.
Auto-sensing:
Detection light brightness and human motion automatically.
It has three induction modes:
① During the night time or at the dark area, it will auto turn on light when it sensing human movement, and it delays 20-25 seconds when people walk out of it’s sensing range the it will turn off.
② It will auto turn on dim light at night, when people come close about 3-5 m; it will turn on bright light for 20-25 seconds the auto turn dim light.
③ It will auto turn on light during the night time or at the dark area and auto turn off during the day time or at the bright area.

Read User Manual Online (PDF format)