MSI Modern 15 A11ML-441NL Laptop Instruction Manual

NOTEBOOK
USER GUIDE

Modern 15 A11ML-441NL Laptop

Copyright and Trademarks Notice
Copyright © Micro-Star Int’l Co., Ltd. All rights reserved. The MSI logo used is a registered trademark of Micro-Star Int’l Co., Ltd. All other marks and names mentioned may be trademarks of their respective owners. No warranty as to accuracy or completeness is expressed or implied. MSI reserves the right to make changes to this document without prior notice.

Revision History

• Version: 1.1
• Date: 11, 2020

FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and radiates radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

NOTE

• The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• Shield interface cables and AC power cord, if any, must be used in order to comply with the emission limits.

FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.

MSI Computer Corp.
901 Canada Court, City of Industry, CA 91748, USA (626)913-0828
www.msi.com

CE Conformity
This device is in compliance with the essential safety requirements and other relevant provisions set out in the European Directive.

Battery Regulations
European Union: Batteries, battery packs, and accumulators should not be disposed of as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations.
Taiwan: For better environmental protection, waste batteries should be collected separately for recycling or special disposal.
California, USA: The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in California.
For further information please visit: http://www.dtsc.ca.gov/hazardouswaste/perchlorate/
Safety Guideline for Using Lithium Battery
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the equipment manufacturer. Discard used batteries
according to manufacturer’s instructions.

WEEE Statement
European Union: Under the European Union (“EU”) Directive on Waste Electrical and Electronic Equipment, Directive 2002/96/ EC, which takes effect on August 13, 2005, products of “electrical and electronic equipment” cannot be discarded as municipal waste anymore and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life.

Chemical Substances Information
In compliance with chemical substances regulations, such as the EU REACH Regulation (Regulation EC No. 1907/2006 of the European Parliament and the Council), MSI provides the information of chemical substances in products at: http://www.msi.com/html/popup/csr/evmtprtt_pcm.html

RoHS Statement
Japan JIS C 0950 Material Declaration
A Japanese regulatory requirement, defined by specification JIS C 0950, mandates that manufacturers provide material declarations for certain categories of electronic products offered for sale after July 1, 2006.
https://storage-asset.msi.com/html/popup/csr_tw/cemm_jp.html
India RoHS
This product complies with the “India E-waste (Management and Handling) Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.
Turkey EEE regulation
Conforms to the EEE Regulations of the Republic Of Turkey.
Ukraine restriction of hazardous substances
The equipment complies with requirements of the Technical Regulation, approved by the Resolution of Cabinet of Ministry of Ukraine as of December 3, 2008 № 1057, in terms of restrictions for the use of certain dangerous substances in electrical and electronic equipment.
Vietnam RoHS
As from December 1, 2012, all products manufactured by MSI comply with Circular 30/2011/TT-BCT temporarily regulating the permitted limits for a number of hazardous
substances in electronic and electric products.
Upgrade and Warranty
Please note that certain components, such as memory modules, HDD, SSD, ODD, and Bluetooth/WiFi combo card, etc., preinstalled in the product may be upgradable or
replaceable by user’s request depending on the models users purchased.
For any further information on the product users purchased, please contact the local dealer. Do not attempt to upgrade or replace any component of the product if users do not understand the component location or how to assembly/disassembly, since it may cause the product to be damaged. It is recommended that you contact the authorized dealer or service center for product service information.
Acquisition of Replaceable Parts
Please be noticed that the acquisition of replaceable parts (or compatible ones) of the product users purchased in certain countries or territories may be fulfilled by the
manufacturer within 5 years at most since the product has been discontinued, depending on the official regulations declared at the time. Please contact the manufacturer via http://www.msi.com/support/ for the detailed information about the acquisition of spare parts.

Safety Instructions

| Read the safety instructions carefully and thoroughly. All cautions and warnings on the equipment or user’s manual should be noted.
---|---
| • Replacement of a battery with an incorrect type that can defeat a safeguard.
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
• Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
| • Plug the power cord into an AC outlet that is easily accessible at all times.
• Disconnect power from the notebook by unplugging the power cord from the AC outlet.
• If a power cord with 3-prong plug came with the package, always plug the power cord into a grounded (earthed) AC outlet.  Do not
remove the grounding pin of the power cord, since it is an important safety feature.
• Always use the AC/DC adapter and power cord approved by MSI, or a compatible one purchased from MSI.
• Place the power cord in a way that people are unlikely to step on it.
Do not place anything on top of the power cord.
| • Always place the notebook on a stable, flat, hard surface before setting it up.
• Do not lay the notebook on an unstable surface while using it, such as your lap, bed, pillow, or sofa, etc.
• Do not cover the ventilators of the notebook to prevent the notebook from overheating.
| WARNING: Do not ingest battery. If the coin / button cell battery is swallowed, it can cause severe internal burns and can lead to death.
Keep new and used batteries away from children.
| Keep the notebook away from humidity and high temperature.
| Always keep the strong magnetic or electrical objects away from the notebook.
| • Do not leave the notebook in an unconditioned environment with a storage temperature above 60ºC (140ºF) or below 0ºC (32ºF), which may damage the notebook.
• This notebook should be operated under maximum ambient temperature of 35ºC (95ºF).
| • Never pour liquid into the opening that could damage the equipment or cause an electrical shock.
• Never use any chemical substance to wipe the surface of this equipment, such as keyboard, touchpad, and notebook case.
| If any of the following situations arises, get the equipment checked by a service personnel:
• The power cord or plug is damaged.
• Liquid has penetrated into the equipment.
• The equipment has been exposed to moisture.
• The equipment has not worked well or you can not get it work according to User’s Manual.
• The equipment was dropped and damaged.
• The equipment has obvious signs of breakage.
| Green Product Features
• Reduced energy consumption during use and stand-by
• Limited use of substances harmful to the environment and health
• Easily dismantled and recycled
• Reduced use of natural resources by encouraging recycling
• Extended product lifetime through easy upgrades
• Reduced solid waste production through take-back policy
Environmental Policy
• The product has been designed to enable proper reuse of parts and recycling and should not be thrown away at its end of life.
• Users should contact the local authorized point of collection for recycling and disposing of their end-of-life products.
• Visit the MSI website and locate a nearby distributor for further recycling information.
• Users may also reach us at gpcontdev@msi.com for information regarding proper disposal, take-back, recycling, and disassembly of MSI products.

MSI Highlights
Explore more exclusive features of MSI notebooks for all series, please visit: http://www.msi.com and https://www.youtube.com/user/MSI

| How to use SteelSeries Engine 3 on MSI notebooks
MSI collaborates with SteelSeries to develop an exclusive SteelSeries Engine 3 in gaming notebooks. SteelSeries Engine 3 is the Apps to combine frequently used functions for gamers in multiple devices management.
---|---
| Sound by Dynaudio on MSI Gaming Notebooks
MSI partners with Dynaudio, the Danish sound specialists, in its gaming notebooks to present you an authentic fidelity audio performance.
| Color Your Life with True Color
MSI has partnered with Portrait Displays, Inc. in developing more accurate, high precision panel quality. MSI True Color Technology guarantees that each panel in a MSI notebook comes with the finest precision in color.
| Tutorial: How to use Nahimic
Discover how to use Nahimic and its three features: Nahimic Audio Effects, Microphone Effects and HD Audio recorder.

Introductions

Congratulations on becoming an user of this notebook, the finely designed notebook. You will have a delightful and professional experience in using this exquisite notebook. We are proud to tell users that this notebook is thoroughly tested and certified by our reputation for unsurpassed dependability and customer satisfaction.
Unpacking
First, unpack the shipping carton and check all items carefully. If any item contained is damaged or missing, please contact your local dealer immediately. Also, keep the box and packing materials in case you need to ship the unit in the future. The package should contain the following items:

• Notebook
• Quick Start Guide
• AC/DC adapter and AC power cord
• Optional carry bag

Product Overview
This section provides the description of basic aspects of the notebook. It will help you to know more about the appearance of this notebook before using it. Please be aware that the figures shown here are for reference only.
Top-open View
The figure of top-open view and description shown below will lead you to browse the main operating area of your notebook.

1. Webcam/ Webcam LED/ Internal Microphone
   • This built-in webcam can be used for picture taking, video recording or conferencing, and so on.
   • The built-in webcam is IR Camera which supports infrared face recognition function. Refer to How to Set Up Windows Hello Face Login in chapter 3 for details.(optional).
   • Webcam LED indicator, next to the webcam, blinks when webcam function is activated; LED goes out when this function is turned off.
   • The built-in microphone shares the same function with an external one.

2. Power Key/ Power LED/ GPU Mode LED Power Key
   • Press this key to turn the notebook power ON.
   • While the notebook is turned on, press this key to force the computer into sleep state. Press again to wake up the system from sleep state.
   • Long press this key to force a shutdown, if needed.
   Power LED/ GPU Mode LED
   • Glowing white when the notebook power is turned on and in UMA GPU mode.
   • Glowing amber when it is in optionally supported discrete GPU mode.
   • LED goes off when the notebook is turned off.

3. Keyboard
   The built-in keyboard provides all the functions of a notebook keyboard. Refer to How to Use the Keyboard for details.

4. Touchpad
   This is the pointing device of the notebook.

5. Fingerprint Sensor (optional)
   Use the fingerprint sensor to set up user’s fingerprints on the notebook, and use it to unlock the notebook. Refer to How to Set Up Windows Hello Fingerprint Login in
   chapter 3 for details.

6. Status LED
   Caps Lock
   Glows when the Caps Lock function is activated.

Front Side View

Right Side View

1. Card Reader
   The built-in card reader supports various types of memory cards. Check the Specifications for details.

2. USB 3.2 Gen 2 Port
   USB 3.2 Gen 2, the SuperSpeed USB 10Gbps, delivers the higher interface speeds for connecting various devices, such as storage devices, hard drives, or video cameras, and offers more advantages over high-speed data transferring.

Left Side View

1. Power Connector
   This connector is to connect the AC/DC adapter and supply power for the notebook.

2. Thunderbolt port (Type-C)
   • Always plug the provided AC/DC adapter that comes with the package to either port to supply power to the notebook and charge the battery pack.
   • Thunderbolt™ 4 supports USB 4.0, PCIe, HDMI, DisplayPort connection; 4K display monitor output; up to 40Gbps data rate; and 5V/3A portable charging power output (follow the Intel® Thunderbolt™ protocol specification).

3. Combo Audio Port
   • A port for a headset, microphone, or headset with microphone.
   • The Combo Audio Port supports 4-Pole 3.5mm headphone jack.

4. HDMI Connector
   HDMI (High-Definition Multimedia Interface) technology is the industry-leading interface and de-facto standard connecting high-definition (HD) and ultra highdefinition (UHD) equipment.

5. USB 3.2 Gen 1 Port
   USB 3.2 Gen 1, the SuperSpeed USB, supports high-speed data transfer for the connected devices, such as storage devices, hard drives, or video cameras.

6. Status LED

Power LED

• LED glows when the notebook power is turned on.
• LED goes off when the notebook is turned off.

Battery Status

• LED glows when the battery is being charged.
• LED turns amber while the battery is in low capacity status.
• Continuously blinking if the battery fails. If the problem persists, please contact your local authorized retailer or service center.
• Battery LED goes out when the battery is fully charged or when the AC/DC adapter is disconnected.

Rear Side View

Bottom Side View

1. Ventilator
   The ventilator is designed to cool the system. DO NOT block the ventilator for air circulation.

2. Battery Reset Hole
   Whenever the system firmware (EC) is upgraded or the system hangs, please 1) power off the notebook; 2) remove the AC power; 3) use a straightened paperclip and insert it to this hole for 10 secs; 4) connect the AC power; 5) power on the notebook.

3. Stereo Speakers
   This notebook may be equipped with built-in stereo speakers which deliver the high quality sound, and supports the HD audio technology.

4. SSD Slots
   This notebook is equipped with two SSD M.2 slots that support the SSD devices with PCIe interface. It is always suggested to contact the authorized dealer or service center for product service.

How to Use the Keyboard
This notebook provides a full functioned keyboard. To ensure that the keyboard will be functioning properly, it is a must to install the necessary applications before using the
keyboard function keys.
Use the fn keys on the keyboard to activate the specific applications or tools. With the help of these keys, users will be able to work more efficiently.

Windows Key
You can find the Windows Logo key on the keyboard which is used to perform Windows-specific functions, such as opening the Start menu and launching the shortcut menu.

Enable Quick Fn Launch Keys

• This notebook is equipped a set of Quick Fn Launch Keys.
  Each function key, F1 to F12, is available to use with an easy single press.

• Users can disable the normal fn keys by press fn and ESC keys to enable Quick Fn Launch Keys. Refer to Use Quick Fn Launch Keys for details.

• The fn Lock LED indicator, located on the ESC keycap, glows when the normal fn function keys are enabled and Quick fn Launch Keys are disabled.

• Press fn and ESC again to restore the default fn keys, and fn Lock LED indicator goes out.

Use Quick Fn Launch Keys

| Speaker Settings
• F1: Mute the built-in speakers. The Mute LED indicator, located on the F1 keycap, glows when the sound is muted.
• F2: Decrease the built-in speaker’s volume.
• F3: Increase the built-in speaker’s volume.
---|---
| Touchpad
Enable or disable the touchpad function.
| Microphone Off
• Press to enable or disable the microphone function.
• The Microphone LED indicator, located on the F5 keycap, glows when the microphone function is disabled.
| Webcam
Enable or disable the Webcam function.
| MSI Center
• This notebook may be pre-installing with a versatile utility, MSI Center, providing users an astonished and efficient solution in multitasking.
• Use this key to switch the User Scenario in MSI Center.
| Keyboard Backlight LED Settings
Press repeatedly to select a backlight LED level according to your preference.
| LCD Brightness Settings
• F9: Decrease the LCD brightness.
• F10: Increase the LCD brightness.
| Switch Display
Switch the display output mode between the LCD, external monitor and both.
| Screen Rotation
Press to rotate the screen upside down for 180 degrees. Press again to rotate the screen back to its default position.

Screen Capture
It is a must to use both keys to take a screen capture to the clipboard, and then it can be pasted into an editing program.

Use Multiple Monitors
If users connect an additional monitor to the notebook, the system will automatically detect the external monitor connected.
Users will be allowed to customize the display settings.

• Connect the monitor to the notebook.
• Press and hold the Windows key, and then press [P] key to bring up [Project].
• Select how you want your display to project on the second screen from the selections of PC screen only, Duplicate, Extend, and Second screen only.

Application: True Color (optional)
This notebook may be pre-installed the True Color application. With this application, users can select various color settings for the best viewing experience.

| Press and hold the fn key, and then press the Z key to launch the True Color application.
---|---
| Press and hold the fn key, and then press the A key to change different view modes.

Specifications
The specifications listed here is reference only, and may change without notice. The actual products sold are different from areas.
Visit MSI official website at www.msi.com, or contact the local retailers to learn the correct specifications of the product user purchased.

Physical Characteristic

Dimension| 356.8 (W) x 233.75 (D) x 16.9 (H) mm
Weight| 1.6 kg (non-touch screen)
1.7 kg (touch screen)
CPU
Package| BGA
Mobile Processor| The latest Intel® Core™ Processor Family
Memory
Technology| DDR4 2666/3200
Memory| 2 x SO-DIMM slots
Maximum| Up to 64GB
Power
AC/DC Adapter(option 1)| 1 x 65W, 19V
Input: 100-240V~, 50/60Hz
Output: 19V , 3.42A
AC/DC Adapter (option 2)| 1 x 90W, 19V
Input: 100-240V~, 50/60Hz
Output: 19V , 4.74A
Battery| 3-cell
RTC Battery| Yes
Storage
SSD| 2 x M.2 slots, support PCIe SSD devices
I/O Port
USB| 2 x USB 3.2 Gen 2
1 x USB 3.2 Gen 1
Thunderbolt™ 4| 1 x USB 4.0 Type-C
• PCIe, HDMI, DisplayPort connection optionally supported
• 4K display monitor output
• up to 40Gbps data rate
• supports maximum 5V/3A portable charging power output when AC power is connected.
• Choose either way to use Power Delivery function to supply power for the notebook
– (1) connect a 20V, 65/90W MSI Type-C adapter
– (2) connect a power bank with at least 20V, 65W output
Audio| 1 x Mic-in/ Headphone-out combo
Video| 1 x HDMI
Card Reader| 1 x MicroSD (SD4.0)
Communication Port
Wireless LAN| Supported
Bluetooth| Supported
Display
LCD Type (optional)| 15.6″ FHD LED panel
15.6″ FHD LED touch panel
Video
Graphics (optional)| • NVIDIA® GeForce® discrete graphics with NVIDIA® Optimus™ supported
• Intel® HD UMA graphics
VRAM| GDDR5, based on GPU structure
Webcam
Resolution| HD
Type (optional)| Infrared Camera
Audio
Internal Speakers| 2 x stereo speakers
Security
Intel® vPro™ Technology (optional)| • Intel® vPro™ Technology offers an added layer of IT security with a complete set of hardware-based security measures. Such as Remote manageability by Intel® Active Management Technology, data security and encryption
through Intel® Trusted Execution Technology, IT policies of businesses can be well-tailored, managed and applied to
wherever appropriate with vPro PCs.
• To find out more, see official Intel® vPro™ website.
Trusted Platform Module (optional)| • TPM 2.0 is a hardware-based encryption device that collaborates with software measures to form a more advanced and secure data protection.
TPM functionalities can be de/activated in BIOS settings where appropriate.
• With professional versions of Windows, BitLocker is the default console available for TPM communications serving
data encryption purposes.

How to Get Started

Begin to Use the Notebook
For a new user of this notebook, we would like to suggest you follow the illustrations below to begin to use the notebook.

How to Use the Notebook Comfortably
If you are a beginner to the notebook, please read the following instructions to assure your own safety, and make yourself comfortable during the operations.

• Good illumination is essential in the work area.
• Choose a chair and desk with good ergonomics and adjust their heights according to your posture.
• Adjust the backrest to support your lower back comfortably when you are sitting upright.
• Place your feet flat on the floor with your knees bent to a 90 degrees.
• Adjust the angle/position of the LCD panel to have an optimal view.
• Stretch and relax your body regularly. Always take a break after working for a period of time.

How to Manage Power Supply
This section provides users basic safety precautions to take when using an AC/DC adapter and battery power properly.
AC/DC Adapter
Ensure that your notebook is connected to an AC power source via the AC adapter before turning it on for the first time. If the notebook automatically shuts down due to low battery power, it is likely to cause system failure. Below are some Dos and Don’ts of an AC/DC adapter.

▶ Dos

• Use the adapter that shipped with your notebook only.
• Always be aware of heat coming from the in use AC/DC adapter.
• Unplug the AC power cord before disassembly the notebook.

▶ Don’ts

• Cover an in-use adapter since it can generate heat.
• Have the AC power cord plugged after powering off the system when the notebook is going to be left unused for a longer time.

Battery
When you get a new notebook or a new notebook battery, it is important to know how to charge and care for your battery in order to get the most out it for as long as you can.
Be aware of that the battery may not be replaced by users.

▶ Safety guidelines

• This notebook is equipped with a non-removable battery, follow the local regulations while discarding the notebook.
• Always keep the notebook and its battery away from excessive moisture and extreme temperatures.
• Always unplug the AC power cord before installing any module to the notebook.

▶ Battery type

• This notebook may be equipped with a high-capacity Li-ion or Li-polymer battery pack depending on the model you have.
• The rechargeable battery pack is an internal power source of the notebook.

▶ Battery charging behavior

To optimize battery life and avoid a sudden power loss, read the tips below:

• Suspend system operation if the system will be idle for a while or shorten the suspend timer’s time period.
• Turn off the system if you won’t be using it for a period of time.
• Disable unnecessary settings or remove idle peripherals.
• Connect an AC/DC adapter to the system whenever possible.

▶ How to charge the battery properly
Please pay attention to the following tips before recharging the battery:

• If a charged battery pack is not available, save your work and close all running programs and shut down the system.
• Plug in an AC/DC adapter.
• You can use the system, suspend system operation or shut down and turn off the system without interrupting the charging process.
• The Li-ion or Li-polymer battery has no memory effect. It is unnecessary to discharge the battery before recharging. However, to optimize the life of battery, we suggest that consuming the battery power completely once a month is necessary.
• The actual charging time will be determined by the applications in use.

How to Set Up a Power Plan in Windows 10
A power plan is a collection of hardware and system settings that manages how your computer uses and conserves power. Power plans can save energy, maximize system
performance, or balance energy conservation with performance. The default power plans — Balanced and Power saver — meet most people’s needs. But you can modify settings for existing plans or create your own plan.

Choose or Customize a Power Plan

1. Find [Windows] icon in the lower-left corner of the screen.
2. Find [Settings] icon or [Settings] within the selection menu and click on it to bring out Settings.
3. Find [System] and click on it in Settings. Find [Power & Sleep] within the System selection menu.
4. Select [Additional power settings] under [Related settings] to bring out Power Options.
5. The Power Plan of [Balanced] is selected as an example here. Click on the [Change plan settings] to bring out Edit Plan Settings to customize a power plan.
6. Change settings for the plan selected in Edit Plan Settings.
7. Click on [Change advanced power settings] to bring out Power Options. Make advanced changes here to the selected power plan to meet your needs
8. To restore the selected power plan back to its default settings, click on [Restore plan defaults].
9. Follow on-screen instructions to finish the configurations.

Create Your Own Power Plan
You are allowed to create your own Power Plan and customize it to meet personal requirements.

1. Click [Create a power plan] in Power Options.
2. Select an existing plan that meets your needs most, and give the new power plan a name. Click [Next] to continue.
3. Change the settings for the plan. Click [Create] to make the customized power plan taking effect.
4. Now you have a new power plan that is automatically set as active.

How to Set Up Windows Hello Fingerprint Login (optional)
Windows Hello is a more secure, personal way to get instant access to your Windows 10 devices using fingerprint or facial recognition. The feature requires fingerprint reader or a infrared camera that supports it. Once you’re set up, you’ll be able to sign in with a quick swipe or glance.
Follow below instructions to login with a touch. You need to set up a password and PIN code before you’re allowed to use Windows.

Create a Password

1. Open up Settings, find and click [Accounts].
2. Find [Sign-in options] within the Accounts selection menu, and click [Password] in Sign-in options.
3. Follow the on-screen instructions to create a new password.
4. Click [Finish] to close.
5. Skip this section, if a password has been set successfully.

Set up a PIN

1. In Sign-in options, click [Windows Hello PIN].
2. Click [Add] to continue.
3. You may be asked to verify in your account with the password. Set up a PIN and then re-enter to confirm, click [OK] to close.

Set up a Fingerprint

1. In Sign-in options, click [Windows Hello Fingerprint].
2. Click [Set up].
3. Follow the Windows Hello setup wizards; click [Get started] button.
4. Place your preferred finger on the upper-left corner of the touchpad. You will be asked swipe the same finger for a few times to setup Windows Hello.
5. Click [Add Another] if you want to repeat the process with another finger, or close the program.

How to Set Up Windows Hello Face Login (optional)
Windows Hello is a more secure, personal way to get instant access to your Windows 10 devices using fingerprint or facial recognition. The feature requires fingerprint reader or a infrared camera that supports it. Once you’re set up, you’ll be able to sign in with a quick swipe or glance.
Follow the instructions as below to login with a look. You need to set up a password and PIN code before you’re allowed to use Windows.

Create a Password

1. Open up Settings, find and click [Accounts].
2. Find [Sign-in options] within the Accounts selection menu, and click [Password] in Sign-in options.
3. Follow the on-screen instructions to create a new password.
4. Click [Finish] to close.
5. Skip this section, if a password has been set successfully.

Set up a PIN

1. In Sign-in options, click [Windows Hello PIN].
2. Click [Add] to continue.
3. You may be asked to verify in your account with the password. Set up a PIN and then re-enter to confirm, click [OK] to close.

Set up a Facial Login with IR Camera

1. In Sign-in options, click the [Set up] button under [Windows Hello Face].
2. Follow the Windows Hello setup wizards; Click [Get started] button.
3. Position your face in the center of the frame that appears on screen. The camera will register your face.
4. Complete the setup. If you wore glasses while setting up face recognition, click [Improve recognition] to go through the setup again without them. This will help the system recognize you either way. Click [Remove] to cancel the facial login setup.

How to Use the Touchpad
The touchpad integrated in your notebook is a pointing device that is compatible with standard mouse, allowing you to control the notebook by pointing the location of the cursor on the screen.

• Configure the Touchpad
  You can customize the pointing device to meet your personal needs. For example, if you are a left-handed user, you may want to swap the functions of the two buttons. In addition, you can change the size, shape, moving speed and other advanced features of the cursor on the screen.
  To configure the touchpad, you can use the standard Microsoft or IBM PS/2 driver in your Windows operating system. The Mouse Properties in Control Panel allows you to change the configuration.

• Position and Move
  Place your finger on the touchpad (usually using the forefinger), and the rectangular pad will act as a miniature duplicate of your display. When you move your fingertip across the pad, the cursor on the screen will move simultaneously to the same direction. When your finger reaches the edge of the pad, lift your finger and place it on a proper location of the touchpad to continue the movement.

• Point and Click
  When you have moved and placed the cursor over an icon, a menu item or a command that you want to execute, simply tap slightly on the touchpad or press the left button to select. This procedure, called as point and click is the basics of operating your notebook. Unlike the traditional pointing device such as the mouse, the whole touchpad can act as a left button, so that your each tap on the touchpad is equivalent to pressing the left button. Tapping twice more rapidly on the touchpad is to execute a double-click.

• Drag and Drop
  You can move files or objects in your notebook by using drag-and-drop. To do so, place the cursor on the desired item and slightly tap twice on the touchpad, and then keep your fingertip in contact with the touchpad on the second tap. Now, you can drag the selected item to the desired location by moving your finger on the touchpad, and then lift your finger from the touchpad to drop the item into place. Alternately, you can press and hold the left button when you select an item, and then move your
  finger to the desired location; finally, release the left button to finish the drag-anddrop operation.

About HDD and SSD
This notebook may be equipped with hard disk drive (HDD) or solid state drive (SSD) depending on the models users purchased.
The hard disk drive and solid state drive are the data storage devices used for storing and retrieving digital information. Most SSDs use NAND-based flash memory, and have higher data transfer rates, lower power consumption, and faster read/write speed than HDDs.
Do not attempt to remove or install the HDD and SSD when the notebook is powered on.
Please consult an authorized retailer or service center for the replacement of the HDDs and SSDs.
About M.2 SSD Slot
The notebook may be equipped with M.2 SSD slots for M.2 SSD cards, which are compatible with SATA or PCIe interfaces, providing diverse features and usages to users.
Consult an authorized retailer or service center for correct specifications and installations.

How to Connect the Internet
Wireless LAN
Wireless LAN is a wireless broadband connection that allows you to connect to the Internet without using any cables. Follow the instructions as below to set up a Wireless LAN connection.

1. Open up Settings, find and click [Network & Internet].
2. Select [Wi-Fi] within the Network & Internet selection menu.
3. Switch [ON] the Wi-Fi function if it is set to [Off].
4. Select [Show available networks] to open up the network selection table.
5. Make sure [Airplane mode] is turn off.
6. Select [Wi-Fi] here.
7. Choose one Wireless LAN connection from the network list to connect to the Internet. Click [Connect] to continue.
8. A security key may be required for connecting the selected network. Then click [Next].

Wired LAN
Using cables and network adapters to connect to the Internet. Before setting up the connection of Dynamic IP/PPPoE or Broadband (PPPoE) or Static IP, contact your Internet Service Provider (ISP) or network administrator for assistance of setting up Internet connection.

▶ Dynamic IP/PPPoE Connection

1. Open up Settings, find and click [Network & Internet].

2. Select [Ethernet] within the Network & Internet selection menu.

3. Select [Change adapter options] to bring out Network Connections window.

4. Right click on [Ethernet] to select [Properties] from the drop-down menu.

5. Open up Ethernet Properties window, find and select [Internet Protocol Version 4 (TCP/IPv4)] in Networking tab. Then click [Properties] to continue.

6. Click [Obtain an IP address automatically] and [Obtain DNS server address automatically] in General tab. Then click [OK].
   ▶ Static IP Connection

7. Follow the previous steps 1 to 4 to continue.

8. Click [Use the following IP address] and [Use the following DNS server addresses] in General tab. Fill the IP address, Subnet mask, Default gateway, Preferred DNS server, and Alternate DNS server. Then click [OK].

▶ Broadband (PPPoE) Connection

1. Open up Settings, find and click [Network & Internet].
2. Select [Ethernet] within the Network & Internet selection menu.
3. Select [Network and Sharing Center] to bring out Network and Sharing Center window.
4. Select [Set up a new connection or network] under [Change your networking settings].
5. Select [Connect to the Internet] under [Choose a connection option], and then click [Next].
6. Click [Broadband (PPPoE)].
7. Fill User name, Password, and Connection name fields. Then click [Connect].

How to Set Up Bluetooth Connection
Bluetooth pairing is a process in which two Bluetooth devices communicate with each other through an established connection.
Activating Bluetooth Connection
▶ Checking the Bluetooth status
Before setting up a Bluetooth connection, it is a must to make sure that Airplane mode is turned off.

1. Open up Settings, find and click [Devices].

2. Select [Bluetooth & other devices] within the Devices selection menu.

3. Switch [ON] the Bluebooth function if it is set to [Off].
   ▶ Pairing the Bluetooth devices

4. Click [Add Bluetooth or other device] to open up Add a device window.

5. Select [Bluetooth].

6. Choose and select a device to start pairing.

7. Give the passcode as instructed by the device waiting to be connected, and then click on [Connect] to continue and complete pairing.

How to Connect External Devices
This notebook may be equipped with various connecting I/O (input/output) ports, such as USB, HDMI, DisplayPort, and mini DisplayPort. Users will be able to connect diverse peripheral devices to the notebook.
To connect these devices, refer to the instruction manuals of each device first, and then connect the device to the notebook. This notebook is capable to auto detect the connected devices, and if there is no detection of the devices, please manually enable the devices by going to [Start Menu/ Windows System/ Control Panel/ Hardware and Sound/ Add a device] to add the new devices.

Video: How to Use RAID Function(optional)
This notebook may support RAID function of different levels. RAID allows users to store data on multiple hard disk drives or solid state drives. Contact the local dealer for further and correct information and be noted that the supported RAID functions may vary depending on the models users purchased.
Watch the instruction video at: https://youtu.be/u2C35-ctFbw

How to Select Boot Mode in BIOS

1. Power on the system. As soon as the first logo screen appears, press the DEL key immediately and enter the BIOS menu.
2. Move the cursor to [Boot] tab, and select [Boot mode select] in Boot Configuration.
3. For operating system supports UEFI-based BIOS (Windows 10), it is suggested to select [UEFI].
4. Refer to MSI FAQ for further information about installing Windows operating system on the notebook at https://www.msi.com/support/technical_details/NB_OS_Installation

Video: How to Restore Windows 10 Operating System on MSI Notebooks
Watch the instruction video at: https://www.youtube.com/watch?v=hSrK6xAQooU, to restore the Windows 10 operating system by using [F3 Recovery] and [Windows 10 Settings] when it is needed.

Video: How to Use MSI One Touch Install
MSI “One Touch Install”, the one-click installer application, allows users to efficiently install all needed drivers on MSI notebooks with single click.
Watch the instruction video at:
Windows 10: https://www.youtube.com/watch?v=ERItRaJUKQs

| |
---|---|---
http://www.msi.com| MSI GLOBAL YOUTUBE| MSI INSTAGRAM

Documents / Resources

| MSI Modern 15 A11ML-441NL Laptop [pdf] Instruction Manual
Modern 15 A11ML-441NL Laptop, Modern 15 A11ML-441NL, Laptop
---|---

References

• dtsc.ca.gov/hazardouswaste/
• MSI - Redirect
• csr
• Support | MSI Global
• csr

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>