niko P46LR Presence Detector Instruction Manual
- June 4, 2024
- niko
Table of Contents
niko P46LR Presence Detector
Presence detector P46LR, DALI-2, secondary and BMS, 32-37 m, 360°, for flush- mounting box
Wiring
Secondary
BMS
**Dimensions
**
Installation
App settings
Settings by BMS software
Table memory bank 2
Address| Description| Default value| Memory type
0x00| Address and last accessible memory location| 0x03| ROM
0x01| Indicator byte (manufacture definable)| 0x00| any
0x02| Memory bank lock byte (◇0x55 = Read Only else Read/ Write)| 0xFF| RAM
0x03| PIR sensitivity segment A (MR, LR and HC detectors) 4 = MAX 3 = HIGH 2 =
LOW 1 = MIN 0 = OFF| 0x03| NVM
0x04| PIR sensitivity segment B (LR and HC detectors)
4 = MAX 3 = HIGH 2 = LOW 1 = MIN 0 = OFF
| 0x03| NVM
0x05| PIR sensitivity segment C (LR and HC detectors)
4 = MAX 3 = HIGH 2 = LOW 1 = MIN 0 = OFF
| 0x03| NVM
0x06| LUX range
0 = NORMAL 0 – 1023 lux, 10-bit
1 = HIGH 0 – 10360 lux, 14 bit
| 0x00| NVM
LED behavior
Specifications
- Article number 353-750021
- Configuration DALI-2 secondary/BMS
- Input voltage via the DALI bus
- Maximum current consumption 28.1 mA
- Nominal current consumption (12 V, 25°C) 8.1 mA
- Maximum startup time DALI < 1200 ms
- Maximum PIR detection startup time 70 s
- Light intensity range 0 – 10360 lux (see DALI BMS settings)
- Detection angle 360°
- Detection range (PIR ) ø 37 m from a height of 3 m
- Ambient temperature -25 – +40 °C
- Mounting method flush-mounting box
- Mounting height 2 – 3.5 m
- Colour white (RAL 9010)
- Dimensions visible (HxWxD) 100 x 100 x 42.2 mm
- Dimensions (HxWxD) 100 x 100 x 77.2 mm
- Wire capacity 1.5/2.5 mm²
- Protection degree IP20
- Impact resistance IK04
- Modification of settings app (iOS/Android) and 2-way Bluetooth® communication/BMS software
- Maximum range Bluetooth® (free field, depending on the device) 50 m
- Operating frequency 2.4 GHz
- Maximum radio frequency power -2 dBm
- Halogen-free yes
- Marking CE
Detection area
Troubleshooting
| Problem | Possible cause | Proposed solution |
|---|---|---|
| Load does not turn on | The wiring is not correct | Check the wiring |
scheme
Load does not turn off| The detector receives| Check for any objects
that may cause
| false triggers| false triggering and remove them
| | from the detection range or lower the
| | sensitivity
App cannot connect to| Bluetooth® has been| Enable
Bluetooth® on your mobile
the detector| disabled on your mobile| device
| device|
Support & contact
nv Niko sa
Industriepark West 40
9100 Sint-Niklaas, Belgium
www.niko.eu
EN +32 3 778 90 80 support@niko.eu
Niko prepares its manuals with the greatest care and strives to make them as complete, correct and up to date as possible. Nevertheless, some deficiencies may subsist. Niko cannot be held responsible for this, other than within the legal limits. Please inform us of any deficiencies in the manuals by contacting Niko customer services at support@niko.eu.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>