VNV BL-LED01 Game Music TV Lights Instruction Manual
- June 14, 2024
- VNV
Table of Contents
Game music lights TV lights computer audio
Instruction Manual
User Manual for Atmosphere Lamps of E-sports Speaker
Open-package Inspection
Thank you for purchasing our product. Before sing the product, please read the
user manual carefully, which contains important safety suggestions and
operation instructions. Please operate the product according to the user
manual, to avoid product damage due to disoperation. Upon receiving the
product, please check it to make sure there is no damage.
Packing list:
Main speaker x 1pcs
Auxiliary speaker x 1pcs
Main lamp x 1pcs
Auxiliary lamp x 1pcs
DG power cord x 1pcs
Micro connecting cable
(with plug at each end) x 1pes
AUX audio cable x 1pcs
User manual x 1pes
Warning:
Power supply for the power adapter of the product is USB DC 5V / 2A. For power
supply out of this range, a regulator is required. Otherwise, the service life
of the product will not be guaranteed, and damage to the product may occur.
Usage
- The product s for indoor projection in i
- See pictures below for details of use
- Correct wiring between the main speaker and the auxiliary speaker for se of the combination
Screw the auxiliary lamp into the auxiliary speaker and make sure the lamp is
locked in the speaker.
Screw the main lamp into the main speaker and make sure the lamp s locked in
the speaker.
This product adopts DC5V 2A USB power adapter. Connect the DG power cord to
the USB adapter and plug it into port @ of the main speaker.
Connect port ( of the auxiliary speaker to port @ of the main speaker by the
Micro connecting cable
Product Interface
- Input interface of the auxiliary speaker: adopts the Micro connecting cable with plug at each end. (dedicated cable)
- Power input interface of the main speaker: adopts the DC power cord connected to the DC5V 2A USB adapter.
- AUX audio input: adopts the AUX audio cable connected to the computer / audio player.
- Output interface of the main speaker: adopts the Micro connecting cable with plug at each end. (dedicated cable)
- The product is set to a default mode after startup with Bluetooth, lamp and star (lamp) turned on. You can search the device “BL-LED” to connect to the Bluetooth and play music.
- When the product s started up with AUX audio cable inserted in, the product will enter AUX audio input mode. You can switch between Bluetooth mode and AUX mode by long press on key 4.
Functions of Keys
| Long press: Turn on / off.
Short press: Switch between LED and star combination light.
---|---
| Long press: Gradient decrease in brightness of the LED lamp post.
Short press: Switch between rhythmic lighting effects of the LED lamp
post.
| Long press: Gradient increase in brightness of the LED lamp post.
Short press: Tumen on / off rhythmic lighting effect.
| Long press: Switch between AUX mode / Bluetooth mode
Short press: Switch to constant “on” mode of multiple fixed color
combination light.
FCC warning
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there i no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Specification Parameters
Loudspeaker: 4Q”3W
Maximum power of the whole lamp: 10W
Green laser: Class I, 520nm, <ImW.
Power input: USB DC5V / 2000mA
Operating temperature: 14°F~104°F (-10°C~40°C)
Projected area: 161~538 square feet (15~50m?)
Product dimensions: & 102*411mm
Disclaimer
- This lamp adopting irreplaceable light source shall be replaced in whole at the end of service life of its light source.
- This product has run through complete and strict tests before delivery. Users should observe and follow the warnings and instructions in a strict manner. Incorrect use will cause damage to the product, which will fall out of our warranty.
- Please Do not look at the light source when product is powered on.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>