ALTEC LANSING MZX6200 Hydrabuds ANC Active Noise Canceling Truly Wireless Earphones User Guide

ALTEC LANSING MZX6200 Hydrabuds ANC Active Noise Canceling Truly Wireless

Earphones

WELCOME
Thank you for purchasing an Altec Lansing product. Download our App to unlock all the features our products have to offer!

• follow us@alteclansingofficial
• follow us@alteclansing
• follow us@alteclansingofficial

12-Month Limited Warranty
All Altec Lansing products come with a 12-month limited warranty from the date of their original purchase

24-Hour Customer Support

• We love our customers, and we care about your experience with Altec Lansing. If you need assistance, please call us at 1.855.292.4087 or e-mail [email protected]

IN THE BOX

• 1 Hydrabuds ANC
• 1 Pair S, M, L Silicone Ear Tips
• 1 Pair S, M, L Memory Foam Ear Tips
• 1 Pair S, M, L Helix Wings™
• 1 Pair Bumpers
• 1 Charging Case
• 1 USB-C Charging Cable
• 1 Quick Start Guide

A CLOSER LOOK

CHARGING

Charging Case Battery Level

1. To power the charging case, insert the USB-C cable into the charging port located at the back of the charging case.
2. Insert the standard USB cable into any suitable USB port.
3. The Battery Level LED Indicators will light up according to the battery capacity.
4. You can see the case battery level at any time by pressing the button on the right-hand side of the case.

BLUETOOTH PAIRING

Powering ON/Pairing:
When the case is opened the earbuds will first connect and then enter pairing mode.

When in the case the earbud LEDs show their charge status:

When removed from the case the earbud LEDs show their pairing status:

Bluetooth Connection
Go to the Bluetooth page in the settings app on your phone. Make sure Bluetooth is ON before connecting to the available device ‘AL HydraBuds ANC:

Multipoint Bluetooth Connection
With the multipoint connection function, you can connect up to two devices with your earbuds (i.e. a smartphone and a computer).

• To activate a multipoint connection, pair your first device as normal, then tap and then press and hold the multifunction button for 6 seconds (either earbud) to activate pairing again. You can now pair a second device.
• Alternatively, simply turn Bluetooth OFF on your first paired device, the earbuds will disconnect and be available for pairing. Now you can pair your second device before turning Bluetooth back ON on your first device.
• When you have two devices connected at the same time, either can be used for music or calls.

EARBUD CONTROLS

Controlling Music

Controlling Calls

“Note: The Hydrabuds ANC earbuds click each time you perform a single press.

MORE CONTROLS

Other Functions

To cycle between Transparency Mode, ANC Mode, and OFF, press the left earbud. ANC cancels out the noise around you, while Transparency Mode allows you to hear outside noise without taking off your earbuds.

To activate the phone Voice Assistant, press and hold the left earbud to the first beep then let go.

Pair a New Device
Turn Bluetooth OFF on your phone/device. The earphones will go into pairing mode. Alternatively, you can press then press and hold either the left or right earbud for 6 seconds to enter pairing mode.

Reset

• A Reset will erase all settings. To perform a Reset, remove the earbuds from the case then press and hold either earbud for 6 seconds. The right earbud will remove the Bluetooth pairing record (the left earbud will not).
• Alternatively, you can perform a Reset with the earbuds inside the case and the lid open. Press and hold the charging case button for 6 seconds.

HYDRABUDS APP

Hydrabuds App and Other Features
Scan the QR code below to download the Hydrabuds App for iOS or Android. Use the app to unlock many other features, and keep your Hydrabuds ANC up to date.

• Via the App, you can enable hands-free voice control, customize button actions, browse, enable advanced features, and update the firmware where necessary.
• When the App notifies you, please update to the latest firmware to ensure the best performance and user experience.

Voice Control
Once enabled in the Hydrabuds App, simply say “Hey Headphones”, and you will hear a confirmation tone. Use any of the following commands to control your Hydrabuds ANC by voice command a second tone is heard after a successful command).

If a call is coming in, you can also use these commands without having to say “Hey Headphones” first: “Accept”. “Reiect”

SAFETY PRECAUTIONS

When using your earphones, basic safety precautions should always be followed including:

1. READ ALL INSTRUCTIONS BEFORE USING YOUR EARPHONES AND CHARGING CASE.
2. Do not use the product near water. Do not put on wet surfaces.
3. Only clean using a clean cloth.
4. Do not allow children to play with this product. This product contains small pieces that can be a choking hazard. Parental supervision is advised.
5. Do not expose this product to excessive heat or fire.
6. Do not expose this product to temperatures above 100°F. Keep out of direct sunlight.
7. Do not attempt to repair this product yourself. Contact a qualified service center if the product needs service.
8. Do not drop, crush, or expose this product to excessive physical force.
9. This product is not intended for commercial use.
10. When charging, keep all charging cables well-ventilated. Do not keep your charging cable in contact with flammable materials such as bedding, linens or synthetic fabrics.

Maintenance and Care

• Use a soft cloth or paper towel to clean your earphones. Never use any harsh chemicals or detergents for cleaning. Make sure your earphones are dry before charging.
• When your earphones are not in use, they should be stored in a cool, dry place.
• Never tug or yank on a cable while it is connected to your charging case. Connect and disconnect cables as carefully as possible.
• Never expose your earphones to high temperatures or extreme cold.
• Please recycle or dispose of your earphones properly based on the laws and rules of your municipality. Contact local recycling facilities and/or the manufacturer of your earphones for further information.

SPECIFICATIONS

• Sweat and Dustproof Rating : IP55
• Battery Type: Lithium Polymer Battery
• Bluetooth Version: V5.2
• Bluetooth Range: 50 ft
• Earbud Battery Capacity: 60mAh
• Charging Case Battery Capacity: 600mAh
• Earbud Charging Time: Approximately 1 Hour
• Fast Charge Time: 10 minutes for 2 Hours Playtime
• Play Time : Approximately 9 Hours* Case holds 3 charges giving 36 hours total

FCC STATEMENT

FCC Statement FCC ID: 2A8MIMZX6200
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:

• The device has been evaluated to meet general RF exposure requirements.
• The device can be used in portable exposure conditions without restriction

Having trouble? We’re here to help!

Call us 24/7 at 1-855-292-4087
Email us at [email protected] or
visit us at alteclansing.com

Keep the manual and all relevant information for future reference.

WARRANTY

This warranty covers the original consumer purchaser only and is not transterable.
This warranty covers products that fail to function properly UNDER NORMAL
USAGE, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year.

What Is Not Covered by Warranty
Damages or malfunctions not resulting from defects in material or workmanship and damages or malfunctions from other than normal use, including but limited to, repair by unauthorized parties, tampering, modification or accident.

• To Obtain Warranty Service and Troubleshooting Information: Call 1-855-292-4087, email [email protected], or visit our website at www.alteclansing.com.
• To receive a Warranty service along with the name and address of an authorized product service center, the original consumer purchaser must contact us for problem determination and service procedures. Proof of purchase in the form of a bill of sale or receipted invoice, evidencing that the Product is within the applicable Warranty period(s), MUST be presented to obtain the requested service. It is your responsibility to properly package and send any defective products along with a dated copy of proof of purchase, a written explanation of the problem, and a valid return address to the authorized service center at your expense. Do not include any other items or accessories with the defective product. Any products received by the authorized service center that are not covered by warranty will be returned unrepaired.

NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL APPLY. DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTEE GIVEN BY ANY PERSON, FIRM,, OR ENTITY CONCERNING THE PRODUCT SHALL BE BINDING ON THE DISTRIBUTOR. REPAIR, REPLACEMENT, OR REFUND OF THE ORIGINAL PURCHASE PRICE – AT THE DISTRIBUTOR’S SOLE DISCRETION -ARE THE EXCLUSIVE REMEDIES OF THE CONSUMER. IN NO EVENT WILL THE DISTRIBUTOR, ITS MANUFACTURERS, OR SAKAR INT. BE LIABLE FOR ANY INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL APPLY. NOTWITHSTANDING THE FOREGOING, THE CONSUMER’S RECOVERY AGAINST THE DISTRIBUTOR SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT SOLD BY THE DISTRIBUTOR. THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL CONSUMER WHO PURCHASED THE PRODUCT AND IS NOT TRANSFERABLE.

Some countries, states, or provinces do not allow the exclusion or limitation of incidental or consequential damages or allow limitations on warranties, so limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights that vary from state to state or province to province. Contact your authorized retailer to determine if another warranty applies. This product is manufactured, distributed, and sold by SAKAR International, Inc. All other trademarks are the property of the respective owner, who has not sponsored, endorsed, or approved this product.

Altec Lansing
195 Carter Drive
Edison, NJ 08817
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and use of such marks by AL Infinity, LLC is under license. Other trademarks and trade names are those of their respective owners.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>