Facemoon B0897JCMHH Respirator Mask Gas Mask Safety Face Cover Instruction Manual

Facemoon B0897JCMHH Respirator Mask Gas Mask Safety Face Cover

Thank You!

Thanks a lot for your support to buy this gas mask, kindly inform you that we have made a lot of strictly tests in the quality, but if you still have any problem about it, even the parcel you received is damaged or missing, please feel free to contact us in time, and we will try our best to help you solve it asap.

[Parcel Include]

1. lpcs Respirator Mask
2. 1 pcs Safety Goggles
3. 2pcs Filter Boxes
4. 2Pcs Cover with Filter Cotton
5. 4Pcs Filter Cotton

[Before Wearing]

1. Check the completeness and air tightness of the mask, to ensure it will work;
2. Make sure that the mask/goggle and any part in the mask is no any cracks, damage or pollution, and it has not been deformed;
3. Make sure that the straps is complete without any damage, and the elasticity is good;
4. Make sure that the filter part is installed and keep good condition;
5. There are protector films in the both sides of the goggle, please tear them off before using the mask, or you will get the not good vision.

[Checking the Air Tightness]

Please check the air tightness (only for the half face mask but not goggle) before wearing.
If there is air leakage, please adjust the position of the mask on the face, and keep the headband is tight. When the air tightness of the mask is beyond the standard, please do not go to the place where is the air pollution area.

[SpecificUsingTips]

Please cover the circular opening of the filter with your hand palm and take a inhale gently. If the half mask get inwards slight, at the same time there is no any air leakage between the your face and the half mask, that is saying the air tightness is good.

[The Using Life of cotton ‘filters]

The using time of our cotton filters are affected by factors like the concentration of particulate matter in the air, the user’ s breathing frequency, the ambient temperature and humidity conditions. If the filter cotton get dirty, damaged or your breathing resistance get increased significantly, you must need to use new one.

[How to Replace the Filter Cartridge]

1. Hold the filter cartridge and rotate it counterclockwise for about 1/6 weeks to remove the filter cartridge;
2. Align and buckle the triangle mark on the new filter cartridge with the corresponding lock mark on the half mask, then rotate it clockwise for about 1/6 weeks and install the new filter cartridge 1.

[How to Wear it]

1. Put the upper head rest on the back of the head, and the both sides of hooks can be adjusted;
2. Pull the hooks in the end of the bottom headband with both hands,and wear the mask on your face;
3. Pull the hook to the back of the neck, and then pull the ends of the headband to adjust the tightness;
4. Adjust the mask to make the mask fit your face tightly and you feel comfortable.

[How to Keep it]

1. When not use it, you should seal and store them in a clean, dry, non-pollution environment;
2. The storage temperature is between -l0°C and 30°C, the storage humidity should not beyond.

[How to Clean it]

1. Please dont clean any filter part, and remove them before cleaning the whole mask;
2. Clean it with warm water, or add some neutral detergent in water, please avoid the sun and dry in a clean place;
3. Dont use washing machine or any solvent;
4. Please dont wipe the glasses in a dry condition, it is recommended to clean and wipe the glasses with professional wipe paper;
5. Dont use rough cloth, newspapers or clothes to wipe the glasses, otherwise it will scratch the lands surface.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>