Syantek BHC1801-5-2 Outlet Wireless Remote Control User Manual

: June 14, 2024
: Syantek

Table of Contents

Syantek BHC1801-5-2 Outlet Wireless Remote Control
Introduction
What’s in the Box
Technical data
Installation
Troubleshooting
FCC
FAQs
Video-Introduction
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Syantek BHC1801-5-2 Outlet Wireless Remote Control

Syantek-BHC1801-5-2-Outlet-Wireless-Remote-Control-
product

Introduction

Welcome to the world of smart home automation with the EIGHTREE ET01B-4 Compatible WiFi Outlet Plug. This intelligent outlet plug is designed to bring convenience, control, and customization to your home. With its WiFi compatibility, you can easily control your electronic devices from anywhere using your smartphone.

What’s in the Box

EIGHTREE ET01B-4 WiFi Outlet Plug
User Manual
Warranty Card

Technical data

Product

This product consists of one or two remote transmitters with ON and OFF functions and several socket receivers.

Features

Each socket receiver can be manually switched or via the handy transmitter.
Individual ON and OFF functions from the remote transmitter.
Easy to use and operate – use one transmitter to control a single socket receiver or program more than one transmitter to each socket receiver.
Self-Learning type, any one transmitter and socket can be programmed with each other, so extra sockets and remote controls can be purchased separately and matched to the existing unit.
Very low standby power consumption reduces energy costs when not working
The socket will remain ‘OFF’ after a power cut, saving energy, Reducing fire risk and protecting your appliances

Notes

The sockets are intended for indoor use only.
The wireless range may be shortened by other electronic devices, appliances, walls, and other physical barriers.
Avoid exposure to high-temperature sources, direct sunlight, or exposure to moisture.
DO NOT exceed the maximum load current of 10A (approximately 1200W).
The sockets are best used in areas with proper air circulation.
For your safety, make sure the batteries within the transmitters are correctly installed before use.
DO NOT dispose of any part of this product in a fire.
This device is not intended for use in areas with high humidity, such as bathrooms.
For best performance, regularly change the batteries in the remote control.
Discard all parts of this product in accordance with local environmental regulations.
Do not dispose in regular household waste.
If the remote is not in use for an extended period of time, remove the batteries.
When cleaning, use a dry or damp cleaning cloth to wipe the socket and remote surfaces.

Installation

Install 1pc 12V(23A) Alkaline battery in the transmitter’s battery compartment, making sure the polarity + / – of the battery is correct.
Plug each socket into a power socket and plug a device into each socket.
Push each ON or OFF button on the transmitter will turn on or off the corresponding socket accordingly

Product illustration

Troubleshooting

In the case that one socket is unresponsive to a remote control, follow the steps below to resolve the issue: If the socket is unresponsive to the remote control, please refer to the, Resetting a socket’ and ‘Re-programming Operation* sections in the manual.

Replace the remote batteries with new 12V (23A) batteries. Low battery power may decrease readable wireless remote range.
Make sure the socket and device are properly connected and powered on.
Make sure that the socket is placed in an area with proper air circulation without overheating.
Make sure the maximum load current of 10A (approximately 1200W) is not being exceeded. If so, unplug the device from the socket immediately.
‘Resetting a socket* is always prior to ‘Re-programming operation, when you want to make some changes.
Should you have any issues or questions regarding your New product, feel free to contact our Customer Support Team Your satisfaction is ours sockets

Resetting an Socket (Cancel programming)

To remove a socket from all transmitter pairings:

Unplug the device connected to the remote socket.
Remove the socket from the power socket.
Press and hold the program button on the socket
Plug the socket back into the power socket while continuing to hold the program button for approximately 5 seconds until the indicator begins to flash.
Program reset is successful when the indicator on the socket flashes several times and stops blinking

Re-Programming/Self-Learning Operation
The sockets are pre-programmed for immediate use, but maybe there are a few units that are not pre-programmed or programmed incorrectly, or you want to change the pre-set configuration to meet your needs. Please follow the steps below:

Restating a socket as per the mentioned sections above first
Press and hold the programming button until the indicator light starts to blink
Release the program button, and press the ‘ON’ or ‘OFF’ button for any desired number on the transmitter.
Programming /paring is successful when the indicator light stops blinking

FCC

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation