VONCI BT-270B2 Large Commercial Induction Cooker User Manual
- June 14, 2024
- VONCI
Table of Contents
VONCI BT-270B2 Large Commercial Induction Cooker
Welcome to be the owner of VONCI Cooktop Thanks for purchasing a VONCI product. This is the perfect countertop burner for you! Please make sure that you have read this user manual before using it. Please keep this manual properly for reference at any time in the future. If you have questions or need assistance, please don’t hesitate to contact us. We will provide the best service for you. Email: VonciService@hotmail.com.
Specifications
- Brand: VONCI
- Supplier No.: BT-270B2
- Item No.: VC-ICBS1-BT18W
- Type: Countertop
- Watts: 500W – 1800W
- Voltage: 120V ~ / 60Hz
- Temperature: 140℉-460℉ (60℃-240℃)
- Temperature Settings: 1-10
- Power Levels: 1-10
- Timer: 170 minutes
- Display: LED
- Control Panel: Angle
- Control Ways: Button Control
- Weight Capacity: 66lbs
- Dimensions: 12.6”x15.6”x4.1”
- Weight: 10.65lbs
Selecting The Proper Cookware
- If there is no cookware or an incompatible cookware is used, the induction cooker will not detect the cookware and will keep beeping. It should be replaced with compatible cookware as soon as possible, otherwise, it will automatically shut down after 1 minute.
- Please put a small household magnet on the bottom of the cookware, if the magnet holds, the cookware is compatible. Cookware made from cast iron, iron, enamelled steel or iron, or magnetic stainless steel works very well. If the induction cooker does not work or beeps, it is usually caused by using a pan with a non-magnetic bottom. In this case, please replace a pan with a magnetic bottom.
Compatible Pans
- Steel or cast iron, enamelled iron, stainless steel with a magnetic bottom, and flat-bottom pots with diameters from 4.7 to 10 inches.
Non-compatible Pans
- Non-magnetic stainless steel (18/10,18/8) bottom, Heat-resistant glass, ceramic container, copper, aluminium pots, rounded-bottom pans/pots with a bottom measuring less than 4.7 inches.
Selecting Appropriate Mode Operation
Power Mode
- If a specific cooking temperature is not required, we suggest using power mode.
- To quickly bring a pot of water to boil, use a higher power level setting. Similarly, for milk heating, sauce cooking, etc., the Power Mode is also applicable. Press the + or – buttons to adjust the power setting.
Temperature Mode
- For frying or sauteing food, temperature mode is preferred because the built-in microprocessor monitors and regulates the cookware temperature to the preset temperature. Press the + or – buttons to adjust the temperature setting.
Timer Mode
The 170-minute timer mode may be used with either the temperature or power
mode. Press the Timer button, the light of TIMER will shine. 0:00 will appear
in the LED display screen. Press the + or – button until the desired number of
minutes appears. When the timer has expired, the unit will “beep” and the
cooktop will turn off.
How to Use
- Place the countertop burner on a dry, stable, level non-combustible, non-metallic surface.
- Allow at least 3 inches of space around the whole cooktop unit for proper ventilation.
- Please put suitable cookware onto the plate of the induction cooker, and connect the plug to a suitable socket.
- After being connected, the light of the Power will shine, indicating that the power is connected normally. Pressing the button, the light of the Heating will shine, indicating that the induction cooker is entering the state of Power is 1200W. Adjust the power rate from level 500-1800 by adjusting the “+ ”or “-” buttons.
- Pressing the button, the light of Keep temp will shine, indicating the induction cooker is entering the state of keeping temperature, the default temperature is 250F, Adjust the temperature from 140F to 460F by turning the “+ ”or “-” button.
- Pressing the to activate the timer mode. Adjust the time from 0 minutes to 170 minutes by the “+ ”or “-” Buttons. The time is displayed as five minutes in each gear. When the timer has expired, the unit will “beep” and the cooktop will turn off.
- When pressing during the working state, the induction cooker will stop working immediately.
- After cooking is completed, press the to turn the unit off. The LED screen will turn off.
- After pressing, the induction cooker will shut off automatically if there is no any operation within 2 hours.
Please read carefully the following instructions before using the induction cooker. Please save it for future reference.
- Do not plug with wet hands to avoid getting an electric shock.
- Do not plug into a socket where several other appliances are plugged in.
- Do not use if the power cord is damaged or the plug does not fit the socket safely.
- Do not open the cooker to replace spare parts by yourself.
- Do not use the cooker closed to flame or wet places.
- Do not use where children can easily touch the cooker, or allow children to use the cooker by themselves.
- Do not place on unstable surfaces.
- Do not move the cooker together with a pot.
- Do not heat a pot empty or overheat to avoid dry boiling.
- Do not place metallic objects such as knives, forks, spoons, lids, cans, and aluminium foils on the top plate.
- Use the unit with sufficient space around it. Keep the front side and either the right or left side of the unit clear.
- Do not use the unit on carpet or tablecloth (vinyl) or any other low-heat-resistant article.
- Do not place a sheet of paper between the pot or the pan and the unit. The paper may get burnt.
- If the surface is cracked, switch off and take to the service centre immediately.
- Do not block air intake or exhaust vent.
- Do not touch the top plate right after removing the pot or the pan, as the top plate will still be very hot.
- Do not place the cooker close to objects that are affected by the magnet, such as radios, televisions, automatic banking cards or cassette tapes.
- The power cord must be replaced by qualified technicians.
- Stands for the surface is liable to get hot during use.
Error code
- If there are any disruptions in the device operation and the display will show an error code check with the table below if the problem can be solved before you contact the customer service or supplier.
| Error Message | Cause | Solution |
|---|
E01
| The temperature of the IGBT is too high or the temperature testing circuit fails.| Clear/unblock ventilation slots. Let the device cool off for a few minutes. The device is ready for the error message to remain indicated in the display after the device has cooled off.
E02
| Heating empty pan, the temperature of the pan is too high or the temperature testing circuit of the pan has failed.| Remove the cookware from the hob. Let the device cool off for a few minutes. The device is ready for operation afterwards.
E03
|
Voltage is unusual
| Let the device cool off for a few minutes. The devices are ready for operation afterwards.
How to Clean
- Unplug and wait until the cooker is cooled down completely. Clean the cooker after using it each time.
- If the pots/pans are used without being cleaned, discolouration or cooked-on stains may be caused.
- Do not use benzine, thinner, scrubbing brush or polishing powder to clean the induction cooker.
- Wipe using a dishwashing agent and a damp cloth.
- Use a vacuum cleaner to suck up dirt from the air intake and exhaust vent.
- Never run water over the unit (Water gets inside may cause malfunction)
Contact Information
- If you have any questions or concerns not addressed in this user manual, please email us at VonciService@hotmail.com. We will provide the best service for you!
Warranty
- Thanks so much for purchasing a VONCI product! It’s our ongoing mission to provide you with high quality commercial equipment and exceptional customer service.
- VONCI warrants this appliance to be free of defects in materials and workmanship for ONE year from the date of original purchase (the Warranty Period). If the appliance exhibits such a defect, VONCI will, at its option, refund repair or replace it without cost for parts and labour.
- For the fastest processing of a warranty claim, please e-mail and include the product name, the order number, your complete contact information, and detailed issue, including pictures or video when applicable. (Email Address: VonciService@hotmail.com)
- This warranty does not cover finishes (including staining, discolouration and scratching), normal wear, nor does it cover damage resulting from accident, misuse, dirt, water, tampering, improper use or care, service performed or attempted by unauthorized service agencies, failure to provide reasonable and necessary maintenance, or units that have been modified.
- VONCI has the final interpretation for this warranty. Thanks.
Read User Manual Online (PDF format)
Loading......