bestCPR L360 Nurugo Manikin Face Shields Instructions
- May 15, 2024
- bestCPR
Table of Contents
bestCPR L360 Nurugo Manikin Face Shields Instructions
This manual includes the information necessary for use of Nurugo CPR manikin. Be sure to read this manual carefully in advance for accurate and safe use of the manikin. For more detailed information, check out the homepage of best CPR,Inc.at www.aed.kr.
Product overview
The Nurugo series products are manikins for CPRtraining. Designed to provide advanced features, such as visual and auditory feedbacks, the Nurugo seriesproducts improve the quality and efficiency of your CPR training.
Features
Refer to the following for the enhanced features of the Nurugo series
products.
-
Thick and sturdy chest The chest part was designed for realistic, deep chest compressions over 5 cm.
-
Visible clavicles (collarbones) and extended skin Clavicles are clearly visible, and the skin is extended on the left side of the manikin for more precise AED pad placement.
-
Realistic neck design resembling human body
– The head rotates 15° to left and right.
– Double neck joints allow for vertical movements of the head. -
Metronome-guided compression training Audible signals may be turned on (30 times,110 times/min rate) at an early stage of compression to provide a guidance on the compression rate.
-
Visual and auditory feedbacks Feedbacks through visual display and sound provide guidance and show the performance of a CPR training. Also, information about a full cycle of contraction and relaxation by chest compression is provided as well, for more effective CPR training.
-
Vertical pressure feedback and posture correction function
– Application of tilt sensor inside mannequin.(patent registration)
– You can correct the vertical compression posture of CPR
– It is important to keep your arms straight and press them vertically to the ground.
Utilizing the features
(in some models only)
Refer to the following to utilize the enhanced features the Nurugo
seriesproducts provide.
Performing feedback-guided compressions
-
Push the feedback button to turn on the feedback.
– The power LED and the forehead display will be turned on. -
Perform compressions on the chest following the visual and auditory feedbacks.
– The following feedbacks will be provided.
Visual feedback
Auditory feedback
Note
- The visualfeedback feature of your Nurugo manikin will enter standby mode if no chest compression is detected for 30 seconds.
- While in standby mode, the visual feedback operation will automatically resume when it senses compressions on the chest.
- The power indicator will blink if the battery is low, and a voice instruction will be made. (“The batteries is low. Pleasereplaceit with the new one.”) Refer to Replacing the batteries on page 8 for information about replacing batteries.
Performing metronome-guided compressions
-
Push the metronome button to turn on the metronome.
– Audible signals will be output at a rate of 110 times/min. -
Perform compressions to the metronome signals.
– The metronome signal will sound 30 times at a rate of 110 times/min, then it will turn off automatically.
– You can push the metronome button again to turn the signal sound on.
Performing an artificial respiration (Forall Nurugo models)
-
Unpack the face shield and install it to the face of the Nurugo manikin.
CAUTION
· Replace the face shield and the lung bag between training sessions to avoid possible bacterial infection or transmission of diseases.
· If the product is used by multiple users, thoroughly clean and sanitize the face of the Nurugo manikin using alcohol wipes after each use, or let each user (trainee) use one’s own face shield during the training.
· Clean the face of the Nurugo manikin using the Manikin Cleaner spray and alcohol wipes whenever visible contamination is observed. -
Adjust the head position to open the airway and hold the nose with your thumb and index finger.
-
Through the mouth, give 2 breathes per each second.
– While giving breathes, ensure that the air is reaching the lungs by observing the chest movement. -
Chest compression posture correction function.
– Application of tilt sensor inside mannequin! (patent registration)
– You can correct the vertical compression posture of CPR.
– It is important to keep your arms straight and press them vertically to the ground.
Maintaining the product
Cleaning the product
Follow the instructions below to maintain your Nurugo product for safe and
trouble-free use.
- Thoroughly clean and disinfect the product after each use (the face, inside the mouth, and the chest area, especially).
- For cleaning, remove the skin from the product. Use warm soapy water or detergent to clean the skin.
- Do not submerge the product for cleaning.
– Moisture will get inside the product, causing damages to the batteries and electronic parts.
Storing the product
-
Store the product in a cool, dry place where the product is not exposed to direct sunlight.
– Exposure to sunlight may cause discoloration and deterioration of parts, such as the skin.
– Moisture may get into the product can cause damages to the internal electronic parts. -
Refer to the following table for storage conditions.
Storage temperature -10°C – 50°C (14°F – 122°F)
Relative humidity 10%– 95%
Replacing the batteries
Remove the battery coveron the back of the product and replace the batteries.
Note
- The power indicator will blink if the battery is low, and a voice instruction will be made. (“The batteries is low. Please replace it with the new one.” )
- Use D-type 1.5V alkaline batteries only. Product damages caused by using unauthorized batteries may not be covered under the product warranty.
- Do not use new batteries and old batteries together. Replace all 4 batteries at the same time.
- If you plan on not using the Nurugo product for an extended period, remove the batteries before storing.
CAUTION Keep the used batteries out of reach of children and safely dispose of them.
How to separate and combine vinyl lung bag (Combining is done inreverse order
of separation.)
How to useCEM KIOSK application model
-
Install App (application model L360B / L380B) The dedicated APP for the CEM kiosk is installed on the kiosk body.
-
Run the app
When you install the CEM KIOSK experience table, press it and the mannequin is connected to the KIOSK’s Bluetooth device.
If the mannequin pairings and connections are not available, set them up as below. -
APP Configuration Please check the “CEM KIOSK User’s Manual” for the configuration password. The setup menu consists of system setup, content player, and evaluation data management.
Attempt to communicate with the Nurugo mannequin. If successful, Nurugo mannequin will be changed to evaluation mode, and a brief indication of success or failure will appear as “Connection Success”. (If you don’t see the “Connection Success” sign, shut down the APP and try again.)
4. System Settings Press Bluetooth Pairing to enable Bluetooth and perform
pairing with Nurugo Mannequin on the pop-up Bluetooth Settings screen. Select
Nurugo Mannequin from the list of paired devices.
Bluetooth 5.2 Low Energy Embedded Module
Product Specifications
- Not including the weight of battery
- Recommended to use alkaline battery (1.5Vx4)
Product maintenance
⚠ Note
- When practicing chest compression, students are to touch `Nurugo CPR manikin’ wearing disposable gloves. If the skin of the manikin becomes hand-stained repeatedly, it may not be removed easily.
- If several students are using one
Nurugo CPR manikin’, be sure to clean the facial part of the manikin with alcohol cotton whenever the students are changed. If it is difficult to clean it each time, the students should use their own
vinyl face shield’. If a stain is found while usingvinyl face shield’, it is required to clean it with exclusive MANICLEAN and alcohol cotton for disinfection. · Whenever an education class is finished, clean the surface of
Nurugo CPRmanikin’ with exclusive MANICLEAN and alcohol cotton for disinfection for maintenance. In particular, clean the face, ins ide the mouth and chest part meticulously. - Replace the vinyl lung bag after practicing artificial respiration with `Nurugo CPR manikin’. If not, the vinyl lung bag may not be unfolded easily in the next class due to the moisture in the bag and the bacteria and fungus may increase inside the bag and give harm to the students.
- `Nurugo CPRmanikin’ can be used cleanly for a long time if its skin is cleaned regularly. When cleaning the manikin, be sure to take the skin off the body and clean it with warm soapy water or cleanser. The body contains battery and electric circuit and thus it should not be dipped or soaked by water.
- The skin of `Nurugo CPRmanikin’ may be discoloured by lipstick, water color or greasy-based ink, latex gloves or other dyes and may be deformed if it is heated.
- If you don’t use it for a long time, please separate the batteries and store them. Battery leakage will flow and cause failure. When you replace batteries, you must replace all four batteries.
Quality guarantee
⚠ Note
Free repair and maintenance services are provided for any problem of the
product if a customer has used the product adequately according to this manual
for 1 years from the date of purchase. (However, free maintenance services are
not available in the following case even during the warranty period.)
- A failure or damage due to unfaithful wrong operation including an operation not done according to this manual
- A failure or damage caused by repair at another repair agency instead of the designated service agency or a repair or renovation at will
- A failure or damage caused by shock from the outside (including fall) after purchase of the product
- A failure or damage caused by natural disasters such as fire, earth quake, flood and thunderstroke and abnormal voltage
- A failure or damage caused by use of the product in an inadequate environment (Ex.: high temperature, high humidity)
- A failure or damage caused by entry of sand, soil, water, etc. into the product
- A failure or damage caused by battery leakage
- A failure or damage caused by serious mistake of the consumer This warranty regulations are effective only in the Republic of Korea Thailand. Inquire with the place of purchase of this product about the terms and conditions of guarantee of our company.
FCC Instructions
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Interference Statement This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to correct the
interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment. This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
FCC Radiation Exposure Statement This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment.
Manufacturer : bestCPR, Inc. (www.AED.kr)
Office : #635, KyeongDongMirwellCity,741 Taejang-ro, Gimpo-si, Gyeonggi-do,
Republic of Korea Tel.: +82-1644-3075 | Fax:+82-2-706-4224 |
help@aed.kr
Factory : #275, KyeongDongMirwellCity, 741 Taejang-ro, Gimpo-si, Gyeonggi-do,
Republic of Korea
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>