Veise B14swTx4tWL Fingerprint Door Lock Installation Guide
- June 14, 2024
- Veise
Table of Contents
Installation Instructions
of Door knob
B14swTx4tWL Fingerprint Door Lock
Thank you for purchasing our products. Please review this manual thoroughly
before operating your device.
All pictures in this manual are for illustration purpose only. Actual product
may vary due to product upgrade.
Parts list
TOOL REQUIRED: Do not use an electric screwdriver during installation.
Prepare the door and check dimensions
If your door already has the holes shown in the picture below, proceed to the
next step, if your door does not have holes, use the mounting template to
drill a new hole.
Latch backset adjustment
Backset is the distance from the door edge to the center of the hole in the
door.
The latch is provided with adjustable design which can fit either 2-3/8”(60mm)
or 2-3/4″(70mm) backset.
A. If the backset of your door is 2-3/8″ (60mm), no need to adjust the latch.
B. If the backset of your door is 2-3/4″(70mm), please adjust the
latch.
Install latch and strike
IMPORTANT:
The latch should be aligned with the chiseled properly. : IMPORTANT: Make
sure the hole in door frame is drilled a minimum of 1″ (25mm) deep.
Install front and rear knob
Test the knob
Keep the door open, checking out front and rear knob to test if it works
properly.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>