Fitop PR24808 Permanent Outdoor Lights User Manual

Fitop PR24808 Permanent Outdoor Lights

PRECAUTIONS

• The Permanent outdoor light is rated as IP67 waterproof.
• The control box and power adapter is rated as IP20 waterproof.
• When the line is not long enough, please use the lamp to connect the extension line connection.
• To prevent light strings from falling, make sure it is installed on the tape and clip.
• Before using light, tighten the waterproof hat and waterproof joint.
• Do not allow children to assemble and install this product.
• Avoid installing products near the main heat or other dangerous sources.
• Avoid using other non-standard adapters for this product.
• This product cannot use external lighting equipment.
• Use this product only with the provided power adapter.
• The product cannot be cut.
• The maximum stitching length of the product is not over 30 meters.

PACKING LIST

PRODUCT PARAMETERS

PRODUCT DISPLAY DIAGRAM

1. 24V-3А adapter
2. Control Box
3. Permanent Outdoor Light
4. Waterproof male and female terminals

THE CONTROLLER BUTTON SCHEMATIC DIAGRAM

• Switch the light mode
• Click on the switch, long press 5s to reset success, the red light is on
• The music mode

Note:
When different mobile phones are used, after the reset is successful, the current user please turn off the mobile phone Bluetooth or exit the Yies Life APP

SAFETY INSTRUCTIONS

1. When installing, disconnect the power first and then connect the lights.
2. The lamps are not suitable for directly installed on the general flammable surface.

Installation

1. Please install the string lights 5-10 cm away from the wall surface.
2. Clean the surface with a cloth or tissue before installing the string lights.
3. Tear off the VHB gum on the back of the light.
4. Press the light firmly against the surface for more than 5 seconds.
5. The screws on both sides of each light are locked with screws.
6. Connect 2 string lights via the waterproof connectors and screw in the cap.
7. Firmly screw the waterproof connector cap of the last string light section.

PAIRING YOUR LIGHT WITH YIES LIFE APP

What You Need

1. WiFi router supporting the 2.4GHz, 5GHz is not supported.
2. A smartphone or tablet running lOS 8.0 (or above)or Android 4.3 (or above).

PAIRING YOUR PERMANENT OUTDOOR LIGHT

1. Download Yies Life app from the App Store (IOS devices) or Google Play (Android devices).
2. Mobile phone connection WiFi and turn on the mobile phone Bluetooth.
3. Open the app, tap the “+” icon in the top right corner and search for “Yies Life”.
4. Tap the device icon and follow the on-screen instructions to complete pairing.

How to connect Amazon Alexa/Google Assistant

1. Open the Yies Life APP.
2. Click “Me”, click the “Voice Service”
3. Choose Alexa/Google Assistant.
4. Select Using Guidance and follow the on-screen instructions to control the device using your voice.

WARRANTY

We provide a two-year warranty and lifetime technical support for a Fitop product.

• Contact us: Fitop_service@163.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>