FITOP LF1500 Smart Floor Lamp User Manual

October 30, 2023
FITOP

Smart Floor Lamp
User Manual

LF1500 Smart Floor Lamp

FITOP LF1500 Smart Floor Lamp - qr codehttps://a.smart321.com/fitopsmartbulb
Android / iOS
(Scan QR code to download our Fitop APP)FITOP LF1500 Smart Floor Lamp -
Parts

Touch button 1
Short press the lamp on, off cycle; long press the infinitely adjustable brightness
Touch button 2
Short press to switch the dynamic effect, long press to adjust the color temperature, double click to open the local mode music rhythm.
Note: In any mode, long press the touch button 2 to switch to white light.
12V DC: input 12V—-2.0A
Reset button: Long press for 3 seconds, reset, 2700K white light breathing flashing, enter the network distribution mode
MIC: Local music rhythm, pickup microphone
POWER LED: Power indicator, green light when the power is on

How to AssembleFITOP LF1500 Smart Floor Lamp -
Assemble

  • Insert the first lamp with the male end of the plug into the base in the direction of the base interface.
  • Then insert the end of the second lamp with the connector into the other end of the first lamp connector.
  • Finally, insert the end of the third lamp with the connector into the interface of the other end of the second lamp.

Set up your smart floor lamp

  1. Download Fitop APP
    Get Fitop APP from APP Store or Google Play, or by scanning the QR code below.

  2. Login APP
    Register a Fitop APP account and login APP.

  3. Add smart floor lamp

Please turn on WiFi and Bluetooth on your phone or tablet.
For a better experience, please turn on location permissions.
Before adding the floor lamp, make sure your router’s network is 2.4Ghz or 2.4Ghz and 5Ghz coexisting.

FITOP LF1500 Smart Floor Lamp - qr code 2https://a.smart321.com/fitopsmartbulb

Power on floor lamp (>10s) →Long press the reset button (>3s) →Wait untill blinking. Confirm floor lamp is now rapidly flashing.
Tap the “ ” or ” Add Device ” button on the app.
Bluetooth will discover the smart bulbs around. Add the floor lamp.
You can also add smart floor lamps manually by following the instructions on the app.FITOP LF1500 Smart Floor Lamp - Add Device

FAQs

If you have any questions, you can contact us through the Fitop App.FITOP
LF1500 Smart Floor Lamp - Fitop App

Q1: How to investigate problems if I can not connect the smart floor lamp?

A. Please check if the floor lamp is powered on properly. B. Check if the phone is connected to WIFI and if your floor lamp is connected to the same WIFI as your phone. C. Ensure the WIFI can access to internet. The only bands that support WIFI are 2.4Ghz or 2.4Ghz and 5Ghz coexistence. D. Check if the floor lamp is rapidly flashing (on 0.5s and off 0.5s) before you add floor lamp. E. Make sure the WiFi password enter in App is correct when adding device. F. Please do not use floor lamp outside WiFi range and metal container where can block WIFI signals.

Q2: How to reset the floor lamp?

A. If the bulb doesn' t have installed. Power on light(>10s) → Long press the reset button (>3s) → Wait untill blinking. B. If the floor lamp has been installed. Click “•••->Device Management->Remove Device” in the page “Home”, the floor lamp will flash after 5 seconds.

Q3: How do I connect multiple floor lamp on one switch?

A. APP can discover multiple floor lamp, but only one floor lamp can be connected at a time, requiring multiple clicks to connect. B. The floor lamp will blink for 3-5 minutes, the successful pairing floor lamp will stop blinking and connect.

How to connect smart floor lamp to Amazon Alexa

  1. Please tap ” Me ->Third-Party Voice Services ->Alexa ->Sign In With Amazon ” of Fitop APP to connect smart floor lamp to Alexa.
  2. If you don’t know the connection steps, you can learn the detailed instruction on page of the “Me ->Third-Party Voice Services ->Alexa ->View more ways to link”.
  3. Tap the”Link with Account Password “
  4. There are detailed connection course

FITOP LF1500 Smart Floor Lamp - Account Password

How to connect smart floor lamp to Google Assistant

  1. Please tap ” Me ->Third-Party Voice Services -> Google Assistant ->Link with Google Assistant ” of Fitop APP to connect smart floor lamp to Google Assistant.
  2. If you don’t know the connection steps, you can learn the detailed instruction on page of the “Me ->Third-Party Voice Services ->Google Assistant ->View more ways to link”.FITOP LF1500 Smart Floor Lamp - Google Assistant
  3. Tap the “Link with Account Password”
  4. There are detailed connection courseFITOP LF1500 Smart Floor Lamp - connection course

FCC Caution.
(1)§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
§ 15.21 Changes or modification warning
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

FITOP LF1500 Smart Floor Lamp - Symbol Made in China

Documents / Resources

| FITOP LF1500 Smart Floor Lamp [pdf] User Manual
LF1500 2A9YVLF1500, 2A9YVLF1500, lf1500, LF1500, Smart Floor Lamp, LF1500 Smart Floor Lamp, Floor Lamp, Lamp
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals