Winrise WR- 935 Office Chair Desk Chair User Manual
- June 14, 2024
- Winrise
Table of Contents
Winrise WR- 935 Office Chair Desk Chair
Scan the QR code to watch the installation video
Instructions for Use
Thanks for purchasing our products. Please read this manual before assembly. And please assemble in order. After the assembly, keep the instruction properly. Make sure all the parts are included (15 kinds in total).
Accessories List
Notice
[If any questions, please contact winrise-service@outlook.com/winrise-Spt@outlook.com].
- Do not stand in this chair or use the chair as a step ladder, use it as chair only. This chair is designed for one person to use at a time.
- Do not use this chair unless all bolts, screws and knobs are firmly secured.
- Check all bolts, screws and knobs every 6 months. Tighten if any are loose.
- Failure to follow these instructions may result in serious injury or death of yourself and people around you.
- Some of the parts are heavy and/or have sharp edge, please install it carefully to avoid hurting you and people around you.
Assembly Instruction
Please assemble in a wide and flat place.
Step 1:
Connect the Split Base Tube(3) and the Central Base Tube(4) with Screws
M6x20mm(9) and tighten them.
Step 2:
Insert Castors(5) into the Cental Base Tube(4). There are 5 Castors need to be
inserted. Insert Air Rod(6) into the Cental Base Tube(4). Put it aside and
we”II use it in Step 6.
Caution:
Confirm Castors (5) must be inserted deeply. Otherwise the castors could
easily fall out and the chair could fall down.
Step 3:
Tighten the Screws M6X30mm(10) with Hexagon Wrench(15) to fix 2 Armrests(7) to
the back of Backrest(1 ). Tighten the 4 screws firmly and then cover the
screws with Decoration Caps(11 ).
Step 4:
After Step 3, fix the bottom of Armrests(7) to the back of Seat Cushion(2).
Tighten the Screws M6X35mm(12) and Gaskets(14) with Hexagon Wrench(15) firmly.
- Caution: Please align all holes and screws before tightening all screws.
- Caution: There is a FRONT sticker on the front of Seat Cushion(2).
Step 5:
Fix Base Plate(8) to the bottom of Seat Cushion(2). Tighten the Screws
M6X18mm(13) with Hexagon Wrench(15) firmly.
Step 6:
Pick up the Step 2’s Air Rod(6) and Step 2’s Cental Base Tube(4). Insert the
Air Rod(6) into Step S’s Base Plate(S). There’s a hole in the middle of Base
Plate(S). Press the Seat Cushion(2) from top to bottom, use your whole body’s
strength to insert it firmly, the assembly is complete now.
Caution:
If the Air Rod (6) doesn’t insert to Base Plate (8) firmly, it’s likely to
fall off when the chair rises up.
Warranty
Activate Your Warranty Now!
Winrise guarantees you a pleasant buying experience. Please scan the QR code
to activate your warranty, so that you can enjoy priority and better after-
sales service. At Winrise, customer satisfaction is our #1 priority. If you
have any questions, please feel free to contact us.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>