Pro Breeze PB-H02 2000W Oil Free Radiator User Manual

: June 14, 2024
: Pro Breeze

Table of Contents

Pro Breeze PB-H02 2000W Oil Free Radiator
Product Information
Product Usage Instructions
SAFETY INSTRUCTIONS
- SYMBOLS EXPLAINED
SPECIFICATION
SAFETY CONTROLS (THERMAL CUT-OFF)
PARTS
ASSEMBLY
OPERATING INSTRUCTIONS
TIMER FUNCTION
CLEANING AND STORAGE
RECYCLING AND DISPOSAL
ERP TABLE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Pro Breeze PB-H02 2000W Oil Free Radiator

Product Information

Product Name: 2500W Oil Filled Radiator
Model: PB-H02
Brand: ProBreeze

Product Usage Instructions

Unpack the castor wheels and arc-shaped brackets from the heater packaging.
Turn the radiator upside-down on a scratch-free and stable surface to prevent damage to the paint finish or your floor surfacing.
Fit the two (2) castor wheels onto the radiator by placing the arc-shaped brackets between the outermost radiator fins on each side of the radiator.
Securely fasten the two (2) castor wheels onto the radiator by screwing two (2) wing nuts onto each foot.
Turn the radiator back upright once the castor wheels have been fitted.
CAUTION: ONLY OPERATE THE RADIATOR WHEN IN ITS NORMAL UPRIGHT POSITION WITH THE CASTOR WHEELS FITTED TO THE BOTTOM OF THE UNIT.
Place the heater upright on a flat, steady, and heat-resistant surface.
Turn the thermostat dial anti-clockwise to LOW and ensure the power switch is ‘O’ OFF.
Insert the plug into a suitable socket.
Turn the power switch dial clockwise to the desired power:
- a. ‘I’ – Low Heat
- b. ‘II’ – Medium Heat
- c. ‘III’ – High Heat
Turn the thermostat dial clockwise until you hear a click and the light turns on. The position of the click indicates the temperature of the room. Turning the thermostat clockwise will keep the radiator on until the room gets warmer. Turning it anti-clockwise will turn off the radiator once the desired temperature is reached.

Thank you for choosing to purchase a product from ProBreeze. Please read the entire manual carefully prior to first use and keep in a safe place for future reference.

SAFETY INSTRUCTIONS

PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS.
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

WARNING: DO NOT COVER THE HEATER.
WARNING: TO AVOID THE RISK OF ELECTRICAL SHOCK, FIRE OR INJURY TO PEOPLE, ALWAYS MAKE SURE THE HEATER IS UNPLUGGED FROM THE ELECTRICAL OUTLET BEFORE RELOCATING, SERVICING, OR CLEANING IT.
WARNING: TO REDUCE THE RISK OF FIRE, KEEP TEXTILES, CURTAINS, OR ANY OTHER FLAMMABLE MATERIAL A MINIMUM DISTANCE OF 1M FROM THE AIR OUTLET.
CAUTION: SOME PARTS OF THIS PRODUCT CAN BECOME VERY HOT AND CAUSE BURNS. PARTICULAR ATTENTION HAS TO BE TAKEN WHERE CHILDREN AND VULNERABLE PEOPLE ARE PRESENT.

Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
The appliance must have a minimum 50cm clearance around all sides of the appliance.
Children must be supervised not to play with the appliance.
Children of less than 3 years should be kept away unless continuously supervised. Do not leave children alone or unattended in the area where the appliance is in use. Cleaning and user maintenance shall not be made by children unless continuously supervised.
Place the appliance on a flat, stable, heat-resistant surface. Operating the product in any other position could cause a hazard.
Do not use this heater to dry or heat clothes.
Ensure the heater is not located immediately below a socket-outlet.
Do not use this heater near water or in the immediate surroundings of a bath, a shower or a swimming pool. Never locate the heater where it may fall into a bathtub or other water container. Do not use the heater in damp areas.
Do not allow water or other liquids to run into the interior of the heater, as this could create a fire and/or electrical hazard.
This heater is intended for indoor household use and similar applications. Do not use outdoors.
Never leave the heater unattended while in use. Always turn the heater off and unplug when not in use.
Do not use the heater while sleeping or place it near a person who is sleeping.
Do not place this heater near flammable materials, surfaces or substances. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9m) from the heater.
Use the heater in a well-ventilated area.
This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving the heater. Use gloves or oven mitts to avoid serious injury.
Prior to cleaning or other maintenance, the appliance must be disconnected from the power supply.
Allow the heater to thoroughly cool down before handling or cleaning.
Do not use any abrasive cleaners or solvents, as heater damage will occur.
To disconnect the heater from the mains power, first turn the controls to the OFF position and then remove the plug from the socket.
Ensure the heater is switched off and the power cord is unplugged from the electrical outlet before cleaning the heater.
Never insert fingers or metal objects into the vents and openings of the heater.
Avoid placing the power cord in areas where it can become a tripping hazard. Do not place the power cord under carpeting or cover it with rugs, runners or similar.
To avoid a circuit overload when using this heater, do not operate another high-wattage heater on the same electrical circuit.
Always plug the heater directly into a wall socket. Avoid using extension leads where possible as they may overheat and cause a risk of fire.
Do not use this appliance with an external programmer, timer switch or any other devise which would switch the device on automatically unless this has already been pre-built into the appliance by the manufacturer.
Do not kink or wrap the power cord and plug around the appliance, as this may cause the insulation to weaken or split, particularly where it enters the appliance.
Ensure the mains cable is fully extended before use and arrange it so that it is not in contact with any part of the appliance.
Do not pull on the mains cable. Never move, carry or hang the appliance by the mains cable. The heater should not be used in a room, of which the floor area is less than 5m2.
Do not operate the appliance with any safety guards removed.
Do not operate the appliance if there are signs of damage to the appliance, power cord, or any of the accessories.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person in order to avoid a hazard.
Do not attempt to repair or adjust any electrical or mechanical elements in the appliance.
Doing so may be unsafe and will void your warranty. Ensure that the mains supply (including voltage, frequency and power) complies with the rating label of the appliance.
Do not use the appliance near petrol, paints, flammable gases, ovens, or other heating sources.
This heater is filled with a precise quantity of special oil. Repairs requiring opening of the oil container are only to be made by the manufacturer or his service agent who should be contacted if there is an oil leak.
Regulations concerning the disposal of oil when scrapping the appliance have to be followed.
Keep the heater out of reach of children and pets.
Always unplug the heater when not in use.
Do not use this heater if it has been dropped.
Never place anything on top of the heater.
There may be trace of odour during the first few minutes of initial use. This is normal and will quickly disappear.
Do not place the heater against a wall or other heaters.
Do not use the heater in high humidity or steam filled rooms.
Do not cover, obstruct or push objects into the vents and opening of the heater as this may cause an electric shock, fire or damage the heater.
Do not operate the heater with wet hands.
The mains cable should not hang down from the surface on which the heater is placed in order to prevent the heater from being pulled down.

SYMBOLS EXPLAINED

For indoor use only.
Please read instruction manual and retain for future use.
Equipment complies with the applicable EU safety requirements and regulations.

SPECIFICATION

Product Dimensions: H 63 x W 23.5 x L 52cm
Net Weight: 11.7kg
Voltage: 230V~
Frequency: 50Hz
Power: 2500W; 1300W; 1200W

SAFETY CONTROLS (THERMAL CUT-OFF)

This heater has two levels of overheat protection.

Automatic thermal cut-off: Switches off the heater in the event of overheating or malfunction and resets it once the temperature drops to a normal level.
Thermal fuse: In the event that the automatic thermal cut-off fails to operate, the heater has a thermal fuse which will cut the power. This is a non-resettable switch which will have to be professionally replaced.

PARTS

Castor Wheels
Power Switch Dial
Thermostat Dial
Indicator Light
Carry Handle
Front Cover
Radiator Fins
Cord Storage
24 Hour Timer

ASSEMBLY

Unpack the castor wheels and arc-shaped brackets from the heater packaging.
Turn the radiator upside-down on a scratch-free and stable surface to prevent damage to the paint finish or your floor surfacing.
Fit the two (2) castor wheels onto the radiator by placing the arc-shaped brackets between the outermost radiator fins on each side of the radiator.
Securely fasten the two (2) castor wheels onto the radiator by screwing two (2) wing nuts onto each foot.
Turn the radiator back upright once the castor wheels have been fitted.
CAUTION: ONLY OPERATE THE RADIATOR WHEN IN ITS NORMAL UPRIGHT POSITION WITH THE CASTOR WHEELS FITTED TO THE BOTTOM OF THE UNIT.

OPERATING INSTRUCTIONS

Place the heater upright on a flat, steady and heat-resistant surface.
Turn the thermostat dial anti-clockwise to LOW and ensure the power switch is ‘O’ OFF.
Insert the plug into a suitable socket.
Turn the power switch dial clockwise to the desired power:
- ‘I’ – Low Heat
- ‘II’ – Medium Heat
- ‘Ill’ – High Heat
Turn the thermostat dial clockwise until you hear a click and the light turns on. The position of the click indicates the temperature of the room. Turning the thermostat clockwise will keep the radiator on until the room gets warmer. Turning it anti-clockwise will turn it off until the room has cooled to a lower temperature and then it will switch on. The radiator automatically rotates through an on-and-off cycle to maintain the current room temperature according to the thermostat’s setting. It is normal for it to heat up and cool down periodically.
To turn off the heater, turn the power switch dial anti-clockwise to “O” OFF.
Unplug the heater from the electrical outlet when it is left unattended or is not in use.

Note: It is normal for the radiator to make crackling noises when first turned on.

TIMER FUNCTION

Timer
The heater can be set to turn ON and OFF at specific times of the day. There are 96 segments around the dial. Each of these segments represent a 15-minute time period.
Setting the Timer:
Note: When you first use the heater, all of the segments should point inwards.
Note: Do not turn the dial anti-clockwise.

Plug the heater in.
Set the power and temperature to the desired settings.
The triangular point will stay fixed, turn the dial clockwise around it so that the triangular point is pointing at the current time of day.
Push the segments outwards for the time period you want the heater to be turned on.
The heater will now cycle on and off according to these settings.
Once unplugged, the heater timer will stop and need to be reset.

CLEANING AND STORAGE

WARNING: ALWAYS TURN THE HEATER OFF, UNPLUG THE POWER CORD FROM THE ELECTRICAL OUTLET AND ALLOW THE APPLIANCE TO COMPLETELY COOL DOWN BEFORE HANDLING OR CLEANING IT.
WARNING: ALLOW THE HEATER TO COOL DOWN FOR 2 HOURS (120 MINUTES) BEFORE CLEANING.
CAUTION: DO NOT ALLOW WATER OR OTHER LIQUIDS TO RUN INTO THE INTERIOR OF THE HEATER, AS THIS COULD CREATE A FIRE AND/OR ELECTRICAL HAZARD.
CAUTION: DO NOT USE ANY ABRASIVE CLEANERS OR SOLVENTS, AS HEATER DAMAGE WILL OCCUR.

Do not attempt to clean the heater in any other way than that detailed by the manufacturer.
Clean the exterior surface of the heater by wiping it with a soft, damp cloth. Dry the heater with a soft clean cloth. Clean the air inlet and outlet grills regularly with a vacuum cleaner, using the brush attachment to avoid any dust build-up.
To store your product out of season, we recommend using the original or similar size box.
Do not kink or wrap the power cord and plug around the appliance, as this may cause the insulation to weaken or split, particularly where it enters the appliance.
Store the heater in a safe, clean and dry place, away from direct sunlight and out of reach of children when not in use.

RECYCLING AND DISPOSAL

Waste electrical and electronic products (WEEE), batteries, accumulators and packaging should not be disposed of with general household waste. This is to prevent possible harm to the environment and human well-being, and to help conserve our natural resources. Most electrical products with a plug, battery, or cable can be recycled. Contact your local council, household waste disposal service, or the store where you purchased the product for information regarding the collection schemes in your area.

Waste Electrical and Electronic Equipment (WEEE)
This symbol on the product and/or packaging indicates that Waste Electrical products (WEEE) under Directive 2012/19/EU which governs used electrical and electronic appliances, should not be disposed of with general household waste.
The Mobius Loop
This symbol indicates that the product or packaging is capable of being recycled.

Take-Back Scheme
Waste electrical products (WEEE) can be sent to One Retail Group for recycling and disposal when you purchase a new product from One Retail Group, on a like- for-like basis. For more information on how to recycle this product please visit www.probreeze.com
The end-user of electrical and electronic products (WEEE) is responsible for separating old batteries and lamp bulbs before they are handed over to a designated disposal and recycling service. Waste batteries can also be disposed of in collection bins, which can be found in most local supermarkets and household waste recycling centres.

ERP TABLE

Model: PB-H02	Symbol	Value	Unit

Heat output
Nominal heat output| Pnom| 2.5| kW
Minimum heat output (indicative)| Pmin| 1.2| kW
Maximum continuous heat output| Pmax,c| 2.5| kW
Auxiliary electricity consumption
At nominal heat output| el max| N/A| kW
At minimum heat output| el min| N/A| kW
In standby mode| el SB| 0.00025| kW
Type of heat input, for electric storage local space heaters only (select one)

Manual heat charge control, with integrated thermostat| No
Manual heat charge control with room and/or outdoor temperature feedback| No
Electronic heat charge control with room and/or outdoor temperature feedback| No
Fan assisted heat output| No
Type of heat output/room temperature control (select one)
Single stage heat output and no room temperature control| No
Two or more manual stages, no room temperature control| No
With mechanic thermostat room temperature control| Yes
With electronic room temperature control| No
Electronic room temperature control plus day timer| No
Electronic room temperature control plus week timer| No
Other control options (multiple selections possible)
Room temperature control, with presence detection| No
Room temperature control, with open window detection| No
With distance control option| No
With adaptive start control| No
With working time limitation| Yes
With black bulb sensor| No

www.probreeze.com
One Retail Group, Ryland House,
24a Ryland Road, Kentish Town, London, NW5 3EH, UK
EU Authorised Representative: Brandrep Limited, The Black Church, St Mary’s Pl N, Dublin, D07 P4AX, Ireland