staniot H320 Smart Security Box Kit User Manual

Smart Security Box kit
User Manual

Introduction

1.1What’s in the Package

Base Station| | The central hub of the alarm system. It connects all the devices to the APP, 50 you an stay in control of your home from anywhere.
---|---|---
Entry Sensor| | Alerts you when a door or window is opened.
Controller| | Allows you to remotely control the alarm system to quickly enter Home, Away, Disarm, and 505 modes
RFID| | Allows you to quickly arm/disarm the system

1.2 Home Installation Diagram
Learn to use the Base Station

1. Wi-fi disconnected: Steady red light
   Wi-fi Pairing: Red light flashing
   Wi-Fi Connected: Steady green light

2. In disarm state, long press 25 to power ON/OFF

3. ln disarm state, long press 55 to enter WiFi pairing mode

Security button function:

Note: When the system enters the Power Saving Mode (Security light of), not press is required to wake up the device.
When the Long Press Alarm’ is enabled in the APP settings, and the system is in a non-alarm state, long press 2s to trigger an alarm,
When the ‘Long Press Silence’ is enabled in the AP settings, and the system is alarming, long press 2s to silence the alarm.
Security light:

Red light flashes every 10 seconds: Base station low battery
Yellow/Red light fleshing : Doorjwindow not closed during delay arming
Security light off: Device enters power saving mode

Set up Smart Life APP

3.1 Download APP – Smart Life

|
---|---
http://qr12.cn/E6dEpG| https://play.google.com/store/apps/details?id=com.tuya.smartlife

1.  105 users, please scan the Apple APP QR code.
2. Android users, please scan the QR code of Google Play to download.
3. After downloading the AP, please enable all usage permissions for the APP in the phone settings.
4. Sign up or Login to your APP account

3.2 Connect Base Station to Smart Life APP.
Note:

1. This base station only supports 2.46Hz Wi-Fi networks only. Make sure your router s set up correctly and can connect to the Internet
2.  When adding the base station to the Smart Life AP, please turn on the mobile phone Wi-Fi and Bluetooth, and confirm that the mobile phone s connected to the 2.4GHz Wi-Fi

Steps:

1. the disarm state, please connect the base station to the power supply, or press the power switch 25 to turn on the device.

2. Press the ‘Wi-Fi’ button 55 to enter the Wi-Fi pairing mode, and the Wi lights flash.

3. On the APP: Open the “Smart Life” APP and enter the “Home” interface.
   A. Click the “+ on the upper right corner of the interface and select  Add Device’,
   B. Press Add” on the discovering device’ s area,
   C. Input the 2.4Ghz WiFi name and password, and click “Next”.
   D. Paired successfully

4. You can remotely control the alarm system on the APP.

3.3Add Accessories

1. Add Device Click Accessories, press “+”, and then trigger the accessory to complete the pairing,

2. Rename Device
   Press “Sub device name” to edit the name, then press Save.

3. Share Device
   The base station can be paired with one APP account only, but you can share it with multiple family members to manage together.

Set up the Alarm Devices

4.1 Entry Sensor

1.  Installation
   The entry sensor should be installed on the door or window (see image).
   A First, clean the area on the door or window and apply double-sided tape to the bottom.
   B. The door sensor transmitter large) and the door sensor magnet (small) should be installed separately, and the distance between the two is less than 0.6”
   C. When the door or window s opened after instalation, the indicator ight will be on for 2 seconds to indicate that the installation is complete.

2. Appearance Design

4.2 Controller

1.  Appearance Introduction

4.3RFD

RFID protocol : 125KHz, 4100/4200
Sensing distance:<3cm
product size: 35X 35X dam
RFID Card: Up to 10 cards can be added
4.4 Other Accessories
Urgent sensor: Emergency detectors such as gas detectors, smoke detectors, or SOS buttons, please add them here. Once triggered, the base station will alarm, no matter what state the device is in
Secret sensor: Once triggered, the base station will not alarm, but only receive a push notification on the APP.
‘General sensor: Other sensors or detectors, please add them here.
Note:

1. The security system supports the accessories with 433MHz, ev1527.
2. For the Entry sensors from another brand, please add it to “General
3. Support up to 68 Sensors, 6 Controllers, 6 Doorbells, 6 Keypads, 10 RFID Cards.

Learn to use the system

5.1 Alarm Modes

1. Base station Alarm Mode:
   A.  Away: The Base station s in a monitoring state, when the accessories are triggered, the Base station will alarm.
   B. Home: The base station is in the monitoring state, which is suitable for arming some areas when you are at home.
   C. Disarm: The Base station cancels the monitoring state, and only the 505 button or the accessors set to “Always” mode can trigger the alarm.

2. Accessories Modes:
   A.  Away/Home: When the Base station is in the “Away’ or “Home” state, the panel will alarm after the sensor s triggered. It is recommended that the indoor sensor can be set to this mode.
   B. Away: When the Base station i in the “Away” state, the panel will alarm after the sensor s triggered. It s recommended that the outdoor detector cane set to this mode.
   C. Always: Regardless of the state of the Base station, any time the sensor is triggered, the panel will alarm. tis recommended to set this mode for gas leaks, smoke detectors, etc.
   D. Disabled: The Base station will not respond to the alarm request of the sensor set in this mode.

Note:
You can choose which sensors are armed in Home and Away mode, are both, or always active. For example, if you want to avoid triggering the alarm when you are at home, you can set the specific sensor in Away mode. Then when you set the panel in “Home” state, the alarm will not b triggered, amylin “Away” state, the alarm will be triggered.
5.2APP Settings
Arm/Alarm Delay: The countdown time when the base station is arming or alarming
Timer: Customize the system schedule, and the system enters the state of arming, disarming, and SOS.
Local Alarm: Base station siren alarm
Siren Alarm: External wireless siren alarm
Siren Beep: The external wireless siren will beep when Arm/Disarm the system.
Delay Beep: Choose whether to sound a beep when the Arm or Alarm countdowns, Indicator Light Standby: The base station will automatically enter sleep mode without any operation within the 305, and the indicator light il go out. (The red light is always on when the device has reported an alarm)
Entry Opened Warning: When the device s arming, there are doors/windows open, there will be an APP push notification.
Entry Open Chime: When the base station is disarmed, there will be a sound when the door/window is opened.
Accessory Low Battery Reset: When the battery status of the sensor shows low power, please click to refresh the battery status after replacing the battery.
Doorbell Ringtone: Built-in 18 doorbell melodies.
Security Button Function
Long Press Alarm: Long press 25 to trigger the alarm.
Long Press Silence: Long press 25 to silence the device alarm.

Troubleshooting

Q1. Wi-Fi network configuration failed

A: Please make sure you have connected to a 2.4 GHz Wi-Fi network and turned on the Bluetooth. Alternatively, you can try to restart the Wi-Fi router or connect to a Phone’ s data network hotspot to try it again.

Q2. Does this Base Station support OTA upgrade?

A: Yes, updates can be checked on the APP. During the update process, please make sure that the power source is connected, or that the battery is fully charged.

Q3. Why is there no response when pressing the security button?

A: Please make sure that the device is connected to Wi-Fi, or whether the Wi- Fi network is normal.

Q4. Does the power switch on the device shut down the system at any time?

A: To ensure safety, the device cannot be turned off in the armed state.

Q5. The base station is connected to the charger, but it won't charge

A Please use the original Type-C charging cable and plug. If you need to test whether the charging cable is working, there will be a prompt sound after the connection is successful.

Q6. How to use Alexa/Googte Assistant voice control system?

A: Please first connect the Alexa/Google Assistant APP with the Smart Life APP, and set the PIN code for disarming,

Q7. Why does it still show a low battery after changing the battery of the sensor?

A: Battery status needs to be manually refreshed. After replacing the battery, please click “Accessory Low Battery Reset’ on the settings page to refresh the battery status.

Q8. What if lose my controller and RFID card?

A: To ensure safety, please delete the lost remote control/RFID in the accessories in time, so that the lost remote control/RFID cannot be used.

Any other problems with the device, please contact customer service.

Hazardous Substance Declaration

Warranty Rules

1. Please contact our after-sales service for any failure caused by the product tset If during the warranty period.
2. The goods are guaranteed for one year from the date of sale, and the warranty service is only valid under normal use.
3. Damage caused by the use environment Not meeting the requirements of his product s not covered by the warranty.
4. Product damage caused by man-made and force majeure s not covered by the warranty.

FCC Declares

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE:
This equipment has been tested and found to comply with the limits for 2 Class B digital device, under Part 15 of the FCC Rules. These emits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
•  Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>