TURTLE BEACH PS5 Stealth 700 Gen 2 MAX For PlayStation User Guide
- June 14, 2024
- TURTLE BEACH
Table of Contents
TURTLE BEACH PS5 Stealth 700 Gen 2 MAX For PlayStation
instructions for use
The Stealth 700 Gen 2 MAX headset can be used with a PlayStation 4 or PlayStation 5 console, while in the PS mode. While in the PS Mode, the headset can also be used with a docked Nintendo Switch; for more information on Nintendo Switch setup, please click here. For instructions on PC Mode Setup, please click here.
To set up your Stealth 700 Gen 2 MAX For PlayStation headset for use with a PlayStation console, please do the following
-
Put the transmitter into the “PS” mode.
-
Connect the transmitter to the USB port. If you are using this headset with a PS5, it is
recommended to insert the transmitter into the USB port at the front of the PS5 console -
Power the headset on.
-
Wait for the headset and transmitter to pair.
-
Configure the settings, as follows:
-
Go to Settings >> Sound >> Audio Output >> Output Device
* Select **Stealth 700 Gen 2 MAX** for **Output Device**
* Set **Output to Headphones** to **All Audio**
* Set **Volume Control (headphones)** level to **Maximum**
2. Adjust your microphone levels by going to **Settings >> Sound >> Microphone >> Adjust Mic Level >> Microphone Level**
3. On **PS5** , enable **3D Audio** to enhance the audio through the headset, and then go to **Adjust 3D Audio Profile** to select the best profile option for your game.References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>