BUTURE Beta03 5000A Car Battery Jump Starter User Guide

: June 14, 2024
: BUTURE

Table of Contents

JUMP START YOUR CAR
CHARGE OTHER DEVIDES
LED LIGHTING
IMPORTANT SAFETY WARNING
Read User Manual Online (PDF format)
Download This Manual (PDF format)

QUICK-START GUIDE
Beta03 Jump Starter BUTURE Beta03 5000A Car Battery Jump
Starter

JUMP START YOUR CAR

BUTURE Beta03 5000A Car Battery Jump Starter - Jump Start your
Car

Insert the jumper cable into the jump starter (220% power).
Connect the clamps to car battery (red to +, black to -).
start your car engine.

● ABOUT THE FORCE START FUNCTION
If three attempts fail when you correctly connected the clamps to your car, you can use the Force Start Function to enter boost mode. BUTURE Beta03 5000A
Car Battery Jump Starter - Function

3 steps to fix the problem:

Check the clamps connection and the product’s battery is above 20%.
Press the Force Start Button for 3 seconds.
The indicator will be green, and go back to start engine ignition.

Caution: When using this function, auto-detection and safety features will be disabled temporarily.

● ABOUT THE TROUBLESHOOTING
In any of the following situations, the smart clamp will turn protections on:

Indicator	Situations
Flashing red and green	Standby status
Solid green	Ready to start
Solid red	1. Low voltage protection

—Recharge the product
2. Over-heating protection
—Remove the clamps to let it cool
3. Timeout protection
—Connection timed out. Start engine within 60s or remove the clip within 30s after a successful start
Solid red with discontinuous beep| 1. Reverse polarity protection
—Reverse the clips and ensure the correct connection
2. Sticking fault
—Contact support@ibuture.com for replacement parts
Solid red with long beep| Short-circuit protection
—Don’t connect the clips together or to the same metal
Other| Please contact support@ibuture.com with details

CHARGE OTHER DEVIDES

Plug the cable into any USB outport.
Press the power button.

LED LIGHTING

BUTURE Beta03 5000A Car Battery Jump Starter - LED
LIGHTING

IMPORTANT SAFETY WARNING

Store in a cool and well-ventilated place out reach of children and pets.
Do not place the product in high temperature environment for a long time. The operation temperature of this product is -20-60°C. The storage temperature should not exceed 50°C/122°F.
Only start vehicles with the smart jumper cable supplied by the manufacturer.
Do not use the product if the clamp or cable is damaged.
Do not connect the red and black clamps together when the product is outputting.
Do not connect the red and black clamps to the same piece of metal.
Do not disassemble or modify this product.
Do not use detergent to clean this product.
Do not abuse this product and avoid heavy dropping or repeatedly hitting it.
Do not operate the product in explosive environments such as flammable liquids, gases or dusts.
Do not immerse the product in water.
Do not litter the product and it should be safely recycled.
Do not incinerate the product or exposed to high temperatures, as they may explode.
Only use replacement parts or accessories provided or recommended by manufacturer.