pTron Fusion Concert 24W Bluetooth 5.3 Speaker User Guide

pTron Fusion Concert 24W Bluetooth 5.3 Speaker

Product Information

The pTron Fusion Concert Bluetooth Soundbar is a high-quality speaker that provides immersive sound and convenient wireless connectivity. It comes with a default volume set at 60%, allowing you to adjust the volume according to your preference. The speaker features a power button, LED lights with customizable modes, and various control buttons for playback, volume adjustment, mode switching, and TWS (True Wireless Stereo) connection.

• Power On & Pairing:
  • To power on the speaker, slide the power button towards the right. The speaker LED light will turn on.
  • During charging, the charging LED light will continuously glow. The LED light will turn off when the speaker is fully charged.
• Play/Pause Button:
  • Press once to play or pause music.
  • Press twice to redial the last calling number.
  • Long press for TWS mode.
• Minus Button:
  • Press once to play the previous song.
  • Long press to decrease the volume.
• Plus Button:
  • Press once to play the next song.
  • Long press to increase the volume.
• Mode Button:
  • If a TF card/USB drive is plugged into the speaker but you want to play a song via Bluetooth, press the Mode button to enable playback through a Bluetooth-connected device. Press the Mode button again to switch back to playback from the TF card/USB drive.
  • Single press the button to change mode.
  • Long press for LED light changes & LED off.
• FM Mode:
  • In FM mode, you can listen to radio channels using the speaker. To enter FM mode, press the Mode button once. To search for channels, press and hold down the Play/Pause button for 2 seconds. Use the Plus (+) and Minus (-) buttons to navigate between stations.
  • Note: In FM mode, connect the charging cable as it works as an FM antenna.
• LED Lights:
  • The speaker comes with 10 different LED light modes that can be customized to create the perfect ambiance. Long press the Mode (M) button for 2 seconds to change the LED light mode. To turn off the LED lights, press and hold the Mode (M) button ten times.
• TWS Connection:
  • Turn on both devices (speakers) and place them within 1 meter of each other.
  • Select one of the devices and long-press the TWS button. Both devices will pair with each other, and the speaker will provide a voice prompt.
  • On your phone, search for “pT Soundbar” and click on it to establish the connection.
  • To disconnect TWS, press the play/pause button. To establish a TWS connection again, switch the mode back to Bluetooth Mode and long-press the TWS button on both speakers for automatic reconnection.

Product Usage Instructions

To power on the speaker, slide the power button towards the right.

1. To adjust the volume, use the Plus (+) and Minus (-) buttons.
2. Press the Play/Pause button once to play or pause music.
3. To switch between songs, press the Plus (+) or Minus (-) button once.
4. To redial the last calling number, press the Play/Pause button twice.
5. For TWS mode, long-press the Play/Pause button.
6. To switch between playback modes (Bluetooth, TF card/USB drive), press the Mode button.
7. In FM mode, press the Mode button once to enter FM mode. Press and hold the Play/Pause button for 2 seconds to search for channels. Use the Plus (+) and Minus (-) buttons to navigate between stations.
8. To change LED light modes, long press the Mode (M) button for 2 seconds.
9. To turn off the LED lights, press and hold the Mode (M) button ten times.
10. Follow the TWS connection instructions to connect two speakers for simultaneous music playback.

• Troubleshooting:
  • If you encounter any issues with connectivity or sound quality, try the following troubleshooting steps:
• Scenario 1: Connectivity Issue
  • Turn off the speaker and charge it to 100%.
  • Unpair the connected Bluetooth device.
  • Restart the Bluetooth device.
  • After fully charging the speaker, turn it on and pair it with the Bluetooth device again.
• Scenario 2: Sound Issues
  • Check if the connected device has any equalizer settings applied.
  • Ensure there are no obstacles between the connected device and the speaker, or try moving the devices closer to each other.
  • Verify if the sound distortion or quality issues occur at all volume levels or only at high volumes.
  • Test the sound on different media players and devices to see if the issue persists.

Important: The person “Fusion Concert” Bluetooth soundbar is set at 60% default volume. You can increase the volume through the control panel on the speaker.

POWER ON & PAIRING

1. POWER ON: Power on the speaker by sliding the power button towards the right, The Speaker LED light will be turned on, and also speaker will respond with a voice prompt.
2. Open the Bluetooth function on your device and search for the available Bluetooth.
3. Click on “pT Soundbar’ to connect
4. POWER OFF: Power off the speaker by sliding the power button towards the Left.

Bluetooth Mode

• Bluetooth Version: Bluetooth 5.3
• Bluetooth pairing name: “pT Soundbar” Just Turn on the Speaker. It will Automatically Connect to the Last Connected Device.

Note: The last connected device must be within 10 meters of the speaker and the Bluetooth function must be turned on.

AUX Mode

1. Connect the device with the 3.5mm aux cable and the speaker will enter into the AUX mode with voice prompts.

TF/USB Mode

1. Use TF Card: Insert a TF card into the TF slot to activate the TF card mode
2. Use a USB drive: Insert a USB stick or pen drive into the slot to activate the USB drive mode.
   • Note: This speaker can support TF/USB up to 32GB.

TO CHARGE THE SPEAKER

• Connect the USB type-C cable to the speaker charging port and the other end of the cable to a USB 5V/1A power source.
• The charging led light will continuously glow during the charging. The charging LED light will turn off when the speaker is fully charged.

1. Play/Pause Button:
2. Press one time to play or pause music
3. Press two times to redial the last calling number
4. Long press for TWS mode
5. Minus Button:
6. One time press the button for the previous song
7. Long press to decrease the volume
8. Plus Button:
9. One time press the plus button for the next song
10. Long press to increase the volume.
11. Mode Button:
12. If a TF card/USB drive is already plugged into the speaker but you want to play a song via Bluetooth then just press the Mode button to enable playback thru Bluetooth connected device. To switch back to playback from TF card/USB drive, just press the Mode button again.
13. Single press the button to change mode. Long press for LED light changes & LED off.

• FM mode: Press one-time mode button “M” to change the Bluetooth mode to FM mode.
• FM search: In FM mode, press & hold down the Play/Pause button for 2s to automatically search for channels
• Next Station: One time press the” +” button.
• Previous Station: One time press the”-” button.

Note: The charging cable works as an FM antenna in FM mode, so it is mandatory to connect the charging cable in FM mode.

LED lights: This speaker comes with 10 different LED light modes; you can customize the lights for perfect vibes.

1. Change the LED light mode: You can change the LED light by long pressing (2sec) the Mode “M” button.
2. Turn off these lights: Press & hold (2 sec) ten times mode “M” button to turn off the LED lights.

How to establish a TWS connection?

1. Turn on both the devices and speaker in the proximity of each other within 1m distance.
2. Select one of the devices and long-press the “ ” button. Both devices will pair with each other, and the speaker will respond with a voice prompt.
3. In your phone, search for” pT Soundbar” and click on the same. Once the connection has been established the two devices can play music simultaneously.
4. To disconnect TWS, kindly press the play/pause “ ” button.
5. Wish to establish a TWS connection again- Switch the mode back to Bluetooth Mode, then long press the “ ” button. Both speakers will connect automatically.

Troubleshooting Scenario 1: Connectivity Issue

1. Turn OFF the Speaker and charge 100%.
2. UN-pair with the connected Bluetooth device.
3. Restart the Bluetooth device.
4. After 100% charging switch ON the speaker and pair it with the Bluetooth device again.

Troubleshooting Scenario 2: Sound is distorted/low volume/low bass/low quality?

1. Check if the connected device does not have any equalizer settings applied.
2. Check if the problem still occurs if the device is moved closer and all obstacles in the middle are removed.
3. Check if the distortion or quality lowers at all volumes or only at high volumes.
4. Check the sound on different media players and different devices and if the distortion happens on all devices or only on specific ones.
5. Check if the problem occurs at all levels of charging or only at low charging levels.
6. Check if the speaker does not have water droplets, in case they do, use the blow dryer to dry out any water from a distance.

Safety Precautions

• Keep the device out of extreme heat and humidity or corrosive environment.
• Play time may vary depending on personal habits.
• Using incompatible USB cables or high-voltage chargers can damage the product & void the product warranty.
• We strongly recommend using good quality DC5V-1A chargers & the USB cable included in the package.
• Please don’t over-charge the product as it will decrease the service life of the battery.
• Read all warnings on the product and in the operating instructions.
• Don’t jam the ports such as charger port, LED port, etc.
• It is recommended to utilize the product below the maximum volume in order to protect your hearing.
• Please don’t open/temper the product or the product’s battery.
• Please keep the product out of children’s reach.
• Dispose of the product responsibly and adhere to your local authority guidelines.

Packing Box Content

• 1 Sound Bar Speaker,
• 1 USB Type-C charging cable,
• 1 Aux cable,
• 1 User Manual/Warranty QR Card

What is Covered in Warranty?

• Manufacturing defects in materials and workmanship of the product ONLY. This warranty applies when the product is used under normal conditions and for the purpose for which the product was designed.
• No warranty on product accessories such as charging USB cables and aux cables.
• To avail warranty, Product Registration is Mandatory at https://ptron.in/apps/product-registration.
• Please read through the complete warranty details at https://ptron.in/pages/repair-service-warranty.

Customer Care Details:

• Mail: support@ptron.in.
• Tel: 040 – 67138888
• Service Centers List: https://ptron.in/pages/ptron-service-centers.
• Disclaimer: The color and specifications shown in or mentioned in the user manual may differ from the actual product. Images shown are for representation purposes only. Other product logos and company names mentioned herein may be trademarks or trade names of their respective owners.

References

• Our Service Center's - pTron India
• Repair & Service Warranty - pTron India

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>