BooKoo 3000A Car Jump Starter User Manual

BooKoo 3000A Car Jump Starter

Important Safety Instructions

DANGER
PLEASE READ AND UNDERSTAND PRODUCT SAFETY INFORMATION BEFORE USE. Failure to follow the instructions may result in ELECTRICAL SHOCK, EXPLOSION, OR FIRE, which may result in SERIOUS INJURY, DEATH, DAMAGE TO DEVICE or PROPERTY. Do not discard this information. This manual contains important safety operating instructions for the jump starter. If damages are caused by failure to follow the instructions, the warranty does not apply.

1. Keep the product in a place free from exposure to any liquid or corrosive materials.
2. Use of an attachment not recommended or sold by the manufacturer may result in a risk of fire, electric shock, or injury to persons.
3. Do not operate this product if it has received a sharp blow, been dropped, or otherwise damaged in any way. Take it to a qualified service person.
4. Do not disassemble this product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in electric shock or fire risk.
5. To reduce the risk of electric shock, unplug this product before attempting any maintenance or cleaning. Turning off controls will not reduce this risk.
6. Avoid long exposure to direct sunlight which may cause damage to the device.
7. Exposing this product to open flames may cause it to explode.
8. If the battery is swollen, leaking liquid or smells bad, discard it immediately.
9. Make sure the battery connector is clean, and battery clamp and cables are kept intact before using the product.
10. Make sure the battery clamp is fully plugged in, or it may affect functions and cause damage to the product.

What Is Included

Features

• Powerful 3000A Peak Current
• Capacity 20000mAh
• Smart Jumper Cables
• QC 3.0 Output
• 12V-16V DC Output
• Emergency LED Flashlight
• Wireless charger: 10W

At A Glance

1. Wireless Charger
2. Electricity display lamp
3. DC Output
4. QC 3.0 Output
5. USB-A Output
6. Type-C Input
7. Flashlight
8. ON/OFF Button
9. Red Jumper Clamp
10. Black Jumper Clamp
11. Smart Clamp Plug

Jump Starting Your Car

1. Turn on your jump starter and make sure it is over 50 % charged. (Note: Push the button to ON, and then press the “ ” power button, which you could check the battery level)
2. Insert jumper cables into the jumping port, and the cable indicator the red/green light flashes alternately
3. Connect the red clamp to positive(+) terminal and the black clamp to the negative (-) of the car battery. The indicator light will turn green. If do not turn green, please follow the Mandatory start steps.
4. Start your car
5. After successfully jump starting, promptly remove clamps from the car battery and put it in the storage bag.

Tip: RST- Force Start Button
If you fail to jump-start the car with normal steps, then please follow the mandatory start step to try again.

Mandatory start steps

1. Remove black clamp
2. Please press the ”RST” button with needles until it green
3. Connect the red clamp to “+” end and the black clamp to the “-” end of the car battery (Don’t reverse!)
4. Start the car (if it fails, go back to step1)
5. Remove the black clamp Remove the red clamp
6. Pack away

LED Indicator Guide

Using The Flashlight

• Long press for 3s, flashlight on
• Press again, The Strobe light on
• Press again, SOS light on
• Press again to turn the light off

Technical Specifications

Trouble Shooting

Customer Service

QUESTIONS? WE ARE HERE TO HELP!
Thank you so much for choosing our jump starter! We’re committed to providing the most professional and safe dumpsters to customers around the world. If you encounter any problems while using the product, please don’t hesitate to contact us.

Notice

• This product complies with the radio interference requirements of the European community. This product can be used across EU member states.
• This product is designed and manufactured with high-quality materials and components, which can be recycled and reused.
• This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling help protect natural resources, human health and the environment. For more information on the disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

FCC Statement

This device complies with Part 15 of the FCC Rules. The operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

RoHS Statement
This product gets RoHS certified. The RoHS stands for Restriction of Hazardous Substances. RoHS, also known as Directive 2002/95/EC, originated in the European Union and restricts the use of specific hazardous materials found in electrical and electronic products.

ISO9001 Statement
This product is produced from an IOS 9001-certified manufacturer. An ISO 9001 quality management system is a systematic and process-driven approach to managing your business. It is designed to support the company in ensuring you meet the needs of your customers, whilst delivering a consistent level of quality and satisfaction.

Contact us

• Email: [email protected]
• [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>