Airnasa YLXDD280-S18W LED Ceiling Light User Manual
- June 6, 2024
- Airnasa
Table of Contents
User Manual
LED CEILING LIGHT
To optimize user experience, please install and use the light according to the following instruction.
Warning:
- Please check if the light and the parts are intact before installation.
- Make sure to cut off power before installation.
- Please do not place this light in corrosive conditions.
- If there is any damage to the cord, please cut off the power and stop using it immediately.
- Wrong connection may lead to the kit getting damaged. The warranty range excludes the damage cause by wrong connection.
- To ensure the light works properly, please use the voltage indicated on the packing.
- To avoid any damage to the light, please do not use chemical solvent during routine maintenance.
Specification:
| Mode No. | YLXDD280-518W |
|---|---|
| Input Voltage | AC100-132V 60Hz |
| Wattage | 18W/PCS |
| LED Model | SMD2835 |
| LED QTY | 20LED × 2/ PG |
| Color | Warm light/ Nature light/ White light |
| CRI | Ra>80 |
| Luminous Flux | 1500lm±10% |
| Product Size | ø 280×H44mm |
| Life Span | 30000H |
| Protection Rating | Ip20 |
| Working Temperature | -20∼45°C |
| CCT (Piecewise Toning) | 3000K/4000K/6000K |
| Material | Aluminum+PP |
Installation:
-
Packaging Including:
-
Use a pencil to align the screw holes of the hanging board and draw the holes. Use a hammer drill to drill holes in the ceiling.
-
Install the expansion tube into the empty space on the ceiling. Fix the ceiling plate on the ceiling with screws.
-
Connect the power input wires L and N of the lamp to the mains. Please turn off the power switch before wiring.
-
Align the lamp to the position of the ceiling plate, rotate the lamp counterclockwise to fasten it, and you will hear a “click” sound after installation.
-
Complete the installation. Just turn on the power and use it.
Shenzhen Xingweisheng Trading Co., Ltd.
Address:
Room 102, 1st Floor, Buildin
501 East, 2 Hao 1, Reservoir Road, Nankeng Community,
Bantian Street, Longgang District, Shenzhen, Guangdong, China