GREENLAW YFX9-US-RGB-IOS-V0 Multifunctional Keyboard With Touchpad User Manual
- June 14, 2024
- GREENLAW
Table of Contents
GREENLAW YFX9-US-RGB-IOS-V0 Multifunctional Keyboard With Touchpad
Note: Please read the manual carefully before using
Technical Support
If you have any questions, please let us know as soon as possible! All of our keyboards come with a 12-month warranty, so you can buy with confidence.
Compatibility
Compatible with iPadOS 13 (with newer versions).
We recommend that you upgrade your ipad to 13.4.1 for best performance.
To check your iPad system version.
- Settings > General > About > Software Version.
- Upgrade to iPadOS 13.4.1 or later to properly use the touchpad feature.
Upgrade your ipad to the latest version:
-
Open your device’s Settings > General > Software Update
-
Click “Download and Install”.
*If you see Resume Download, click it.
Settings
Pairing with the tablet.
-
Switch the ON/OFF to the ON position
-
Connect the device BT1 : long press blue light flashes quickly
Connect device BT2: long press green light flashes quickly -
Switch “Bluetooth on” in “Settings”
-
Click “Settings” – “Bluetooth” -“Available devices” Bluetooth Keyboard”
-
Click Pairing in the pop-up window. (When the Bluetooth indicator stops flashing, the device is connected)
When pairing with a new device, repeat steps 1-5 after the connect indicator appears, and pairing is complete.
Note: Keyboard supports simultaneous connection of two devices, short press FN + C / V switch Bluetooth BT1 / BT2
If your system is 13.3.1, please follow the steps below to enable the touchpad function:
- Go to Settings > Accessibility > Touch
- Make sure the Assistive Touch option is turned on
Shortcut Keys
Tip: When the red light flashes, please note that the device needs to be charged and the working voltage only supports 5V.
= turn on/off the touchpad
= Bluetooth pairing
= Toggle keyboard backlight color
= Page up/down
= Toggle keyboard backlight brightness
Touchpad Functions
Note: Please make sure the device is connected and the keyboard touchpad function is turned on.
One-finger tap
| Action 1 : Tap once in the main interface
Function : Mouse cursor click
Action 2: Tap 2 times and swipe
Function: Select or move icons
Action 3: Tap twice when iPad is in sleep mode
Function: Wake up the tablet
---|---
Tap with two fingers
| Action 4: Tap the trackpad once
Function: Show quick actions.
---|---
Two-finger swipe
| Action 5: Slide finger up/down
Function: Scroll up/down web pages or files
Action 6: Slide your finger left and right
Function: Flip the page to the left or right
---|---
Two-finger zoom
| Action 7: Two fingers for zooming in or out
Function: Zoom in or out of a page (only available on websites or
documents)
---|---
Three-finger swipe up
| Action 8: Swipe up
Function: Open the app switcher
---|---
Three-finger swipe left to right
| Action 9: Swipe left to right
Function: App window switching
---|---
Move the cursor to the bottom of the screen
Function: Cut out the DOCK bar
Move the cursor to the top right comer
Function: Open the control center
In the application page
Touch and hold the left trackpad, you can drag the application icons to where
you want them to be
Touch and hold the right trackpad.
Show App menu (same as right mouse button.
On the Edit page
Touch and hold the left trackpad, you can select the text you want and you can
drag and drop around the text.
Installation and Removal
-
Put one end of the tablet into the bottom of the case (p attention to the alignment of the camera hole)
-
Push the tablet into the case.
-
Press the two corners of the top of the case and push out.
-
Remove the tablet.
Charging
- Turn on the keyboard. (if the power indicator flashes, please charge the keyboard)
- Plug the charging cable (included) into the keyboard and charger
a) Keyboard charging light turns red.
b) When charging is complete, the battery indicator goes off.
iPad adapter
Troubleshooting
If the keyboard does not work properly, please check the following things:
- The Bluetooth function of the tablet (or other Bluetooth devices) is turned on;
- Bluetooth keyboard is within 33 feet;
- Bluetooth keyboard is charged;
- Make sure the keyboard is powered on (battery indicator is on);
- Make sure the keyboard has been paired via Bluetooth.
If you have unwanted autocorrect or punctuation, please follow these steps:
- Open Settings>General>Keyboard>Hardware Keyboard;
- Turn off Auto-Capitalization Auto-Correction and “.” Shortcut (see the picture below).
If Bluetooth pairing fails, please try the following steps:
- Press and hold the key, the red, green, and blue indicator lights are on at the same time, then release, the keyboard has been restored to factory settings.
- Delete all Bluetooth devices on the tablet;
- Turn off the Bluetooth function on the tablet;
- Restart the tablet;
- Turn on the Bluetooth on the tablet;
- Switch the keyboard switch;
- Repeat the “Setup” steps in the manual to pair the keyboard.
Product Specifications
10 meters (33 feet)
GFSK
3,0-4,2V
12mA (without backlight) / 100mA (backlight)
<40μA
<300mA
50 hours
5 hours
please keep at room temperature, normal voltage charging
30 seconds
10 minutes
<3 hours
5V
3 million times
10+55 ‘C
Compliance
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, as shown in Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates use and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur during a particular installation. If the equipment does cause harmful interference to radio or television reception, this can be determined by turning the equipment off. Try to correct the interference by one or more of the following measures.
- Moving or shifting the receiving antenna. Increasing the distance between the equipment and the receiver.
- Connecting the equipment to a circuit outlet on a different circuit than the one to which the receiver is connected.
Seek assistance from your dealer or an experienced radio/TV technician .
Changes or modifications not expressly approved by the party responsible for compliance may void the user’s authority to operate the equipment. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.
- The equipment will not cause harmful interference.
- The equipment must accept any interference received, including interference that may cause other operations.