MECHEN M30 Hifi MP3 Player User Manual

MECHEN M30 Hifi MP3 Player User Manual

Thanks for your purchase!
Welcome to download manuals at www.mechen.com.cn Any after-sales service is needed, please feel free to contact us at mechenservice@hotmail.com

Instruction of Buttons

Charge the Player

Use 5v, 1000mA Charger
Plug one end of the USB cable into the USB port of a charger, and the other end into the port on your device. After fully charging, disconnect the cable from your device by pulling it straight outward.

Charge by Computer
Connect the device to a running computer via the included USB cable.

Note
If not used for a long time, you are supposed to charge the battery at least once every 2 months.

Quick Guide

Power on, off
Long press the power button for 3 seconds to turn on / off the player.

Lock screen
In standby or playing mode, short-press the power button to lock the screen, and press it again to unlock it. In this mode, These buttons (Last/Next song), PLAY/PAUSE, And VOLUME work. Only rotate clockwise/counterclockwise on the scroll wheel to increase/decrease the volume in this mode.

Back
Short press the “BACK” button to return to the previous menu. Long press to the home menu.

Volume
In any interface, press the “VOLUME” button to get into the volume adjustment mode, then rotate the scroll wheel clockwise/counterclockwise or press the button to increase/decrease the volume, and press the “BACK” button to return.

Scroll wheel
Adjust the volume or browse the music track by rotating the scroll wheel.

Reset
If the device freezes, Poke the reset hole with a thin needle or hold the power button for 15 to restart it.

Data Transfer
Using the supplied USB cable, connect your computer and copy over media files as if it were a flash driver or use music management software such as Windows Media Player to transfer the files (not work for iTunes).

Main Functions

Music
Select “Music” on the main menu by pressing the button or rotating clockwise/counterclockwise via the scroll wheel and pressing the “MENU” button to get into the interface, then you’ll find the related lists: All songs: All songs you load up onto the memory card will be listed here. Select a song and press the “MENU” button to choose the option: Last Played, Now Playing(go to music playing interface), Play(Play the song you select), Add to Playlist(Add to the system’s default playlist).

• Artists: Sort songs by Artists
• Albums: Sort songs by Albums
• Genres: Sort songs by Genres

Attention:

1. ONLY 4000 music tracks can be displayed in the music lists, please go to the folders to find the complete tracks.
2. If the songs you download contain both lyrics and cover, the player will priority display the lyrics instead of the cover.
3. CUE files supported. After you transferred CUE files to the player.
4. Go to “Music” and get into the songs list, Choose the song from CUE file press“MENU” to the playing interface and press it again to go to the CUE playlist, all the songs inside will list here, Press “PLAY/PAUSE” button to play/pause.

Note

1. The CUE files’ name must be the same as the songs’.
2. The “Repeat folder” function won’t work for CUE file.

Folder View
View all the folders you created.

Note
The player does not support Bluetooth, Video, e-books, and pictures.

Equalizer
Select “Equalizer” on the main menu. Short press the “MENU” button to get into the interface, and press buttons to choose the option including Rock, Pop, Soft, Jazz, Classical, Techno, Custom, and Off.
Custom settings: On the custom interface, press the “PLAY/PAUSE” button to choose the vertical axis and rotate the scroll wheel clockwise/counterclockwise to adjust the value you want them to, Press the “MENU” button to save the settings.

Note
This player only supports sound effect adjustment with a sampling rate below 48KHz!

My Favorite
3 default playlists will be listed here, and you can add songs to each playlist in the playing interface. However, it is not recommended for you to sort your music here. The easiest way to create a playlist is to create some folders on your PC/Mac and sort your music into these folders. Then transfer them to this player, and you’ll find these folders in the “Folder view” icon.

Play Settings

• Select “Play setting” on the main menu, then you’ll find the related lists:
• Shuffle: On/Off(press the “ MENU” button to save). Songs will be played randomly, not in order.
• Repeat:Repeat off/ Repeat1/ Repeat all/ Repeat Folder
• (Repeat folder means that it will only repeat the songs from the current folder where you are in.)

Default volume

• Memory: Memorizes the last volume value set when you turn it off
• Custom: Memorize the volume value you just set
• The line level： Line output audio amplitude selection, including:
• Volume synchronization: Line-output audio is controlled by volume adjustment
• 6db: Line-output audio is not controlled by volume, fixed at -6DB
• 0db: Line-output audio is not controlled by volume, fixed at-0DB

Settings

You can set Language, Update playlist, Brightness, Backlight timer, Sleep timer, Off timer, Format device, and Factory settings here.
Auto upgrade: Update the firmware directly on the player. (You need to transfer the firmware to the device first, go to “ Setting”, “Auto upgrade” ” and select “Yes” to update the device. After it’s done, remember to turn it on by holding the POWER button. You could contact our technical support to get the recent firmware if needed. See Cover)

Support and Troubleshooting

Q: How to transfer music to the mp3 player?
A: Download music to your computer first, and then connect the mp3 player to your computer through a charging cable. A new disk will pop on as a flash driver, and drop all your music to the disk. You can create folders on the disk to sort your music.

Q: Why my computer can’t detect mp3 player?
A: MECHEN Mp3 player can be paired for all computer systems with the latest USB driver. Please update your USB driver before plugging in the MP3 player or try another charging cable. If you still can’t connect the Player to your computer, please contact the MECHEN customer service team for additional help (See Cover).

Q: How can I continue audio play after turning the player off?
A: Turn the player off on any interface, it will continue playing audio when you turn it on again.

Q: How to insert the SD card into the card slot successfully?
A: Push it in with your fingernail tip till you hear a “Click! “, Push again and the card will pop back out of the SD card slot.

Q: How to repeat music from a single album ONLY?
A: Set the play mode to“Repeat Folder” in the“Play Settings” icon on the main menu. The function works for Artists, Albums, Genres, 3 default playlists, and folders you created your own on PC. Not work for CUE files.

Specifications

Audio Bitrate

| WAV: Max: 64BIT 192KHz
APE: Max: 24BIT 192KHz
FLAC: Max: 24BIT 192KHz
AIFF: Max: 32BIT 192KHz
DSD: Max: 1BIT DSD64 3072KHz
Playing time| About 30h (Volume 50 & Screensaver mode)
Charging time| About 2.5h(5V, 1000mAh charger)
Volume control| 100-level digital volume control method
Headphone output power| ≥80mW
Audio output| 3.5mm headphone&line output
Line output| Volume synchronization, -6DB, 0DB optional
USB port| MICRO 5PIN USB2.0

Download PDF: MECHEN M30 Hifi MP3 Player User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>