BRAUN BC16BUK Digital Alarm Clock User Guide
- June 14, 2024
- Braun
Table of Contents
BRAUN BC16BUK Digital Alarm Clock User Guide
PRODUCT PARTS
Getting Started
- Remove the battery door ( ).
- Take out button cell battery and remove the plastic strip.
- Replace the button cell battery.
- Close the battery door.
- Plug the power adapter into the DC jack at the back of the clock ( ).
Only use new alkaline batteries from a reputable brand.
Setting the time
- Slide the ALARM / TIME / BRIGHTNESS switch ( ) to the TIME position.
- Press the ‘+’ or ‘-‘ key ( ) to set the desired value. Press and hold the ‘+’ or ‘-‘ key to speed up the setting.
- Slide the ALARM / TIME / BRIGHTNESS switch to the BRIGHTNESS position to save the setting and return to normal display.
Setting the alarm
- Slide the ALARM / TIME / BRIGHTNESS switch ( ) to the ALARM position.
- Press the ‘+’ or ‘-‘ key ( ) to set the desired value. Press and hold the ‘+’ or ‘-‘ key to speed up the setting.
- Slide the ALARM / TIME / BRIGHTNESS switch to the BRIGHTNESS position to save the setting and return to normal display.
Using the alarm and snooze function
- Enable the alarm by touching the ALARM ON / OFF button ( ) for ~ 1 second. The green light will light up and the bell icon will appear on the LCD display.
- Touch the SNOOZE key ( ) to stop the alarm and activate the snooze function. When the alarm sounds, the alarm icon will flash.
- To disable the alarm and snooze function, touch the ALARM ON / OFF button for ~ 2 seconds. The green light will go out and the bell icon will disap – pear.
For detailed information refer to
the full user manual available at
www.braun-clocks.com/pages/warranty or scan this code:
Braun helpline
Should you have a problem with your product, please check your local service
center at:
www.braun-clocks.com
www.braun-watches.com
Certain trademarks used under license from the
Procter & Gamble Company or its affiliates.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>