soundcore A3129 Motion Boom Plus Outdoor Speaker User Manual
- June 14, 2024
- Soundcore
Table of Contents
soundcore A3129 Motion Boom Plus Outdoor Speaker
At a Glance
- Bass up button
- Bluetooth button
- Volume down button
- Multi-function button
- Volume up button
- Power button
- PartyCast button
- USB-C port for charging in
- USB-A port for charging out
- Audio port
Charging
Charge your Speaker
- Use a certified USB-C cable and charger to prevent any damage.
- Fully charge this speaker before the first use to prolong the lifespan of the built-in battery.
- Disconnect this speaker from a charger when fully charged. Do not charge for extended periods.
Charge your USB Devices
Charge your USB devices through the USB-A charging port.
Powering On/Off
| Press once, or press and hold for 2 seconds | Steady white | Power on |
|---|---|---|
| Press and hold for 2 seconds | Light off | Power off |
This speaker will power off automatically after 20 minutes if no device is connected.
Using Your Speaker
Bluetooth Mode
With this speaker, you can enjoy music through your Bluetooth-enabled devices.
| Press once| Enter Bluetooth pairing mode
---|---|---
| Flashing blue| Bluetooth pairing
| Steady blue| Bluetooth connected
- This speaker can pair with 2 mobile devices via Bluetooth. To pair with another Bluetooth device, press the Bluetooth button once to re-enter Bluetooth pairing mode.
- This speaker can only play music on one mobile device at a time. To play from another connected device, pause the device that’s currently active first.
- Each time you power on your Soundcore speaker, it will automatically connect to your last connected device if available within the Bluetooth range. If not, press the Bluetooth button once to enter Bluetooth pairing mode.
TWS (True Wireless Stereo) Mode
Two identical Motion Boom Plus speakers can pair up with each other for true
wireless stereo sound. In TWS mode, connect either one of the two speakers
with your mobile device so that both speakers play the same audio (one as L
channel and the other as R channel).
On both Soundcore speakers, press and hold the Bluetooth button for 2 seconds
to enter TWS pairing mode.
- The speakers start searching for each other to establish the TWS connection. The TWS LED indicator on both speakers will flash white.
- Once successfully connected, the TWS LED indicator on primary speaker will be steady blue while on secondary speaker will be steady white.
| TWS | Press and hold for 2 seconds | Enter TWS pairing mode |
|---|
| Flashing white| TWS pairing
| Steady blue (Primary speaker)| TWS connected
| Steady white (Secondary speaker)
To exit the TWS mode, press and hold the Bluetooth button for 2 seconds.
PartyCast Mode
You can wirelessly connect up to 100 identical Motion Boom Plus speakers
together.
- Connect a Motion Boom Plus speaker with your smartphone or tablet as the primary speaker.
- Press the PartyCast button once on the primary speaker and all the additional speakers to enter the pairing mode.
When successfully connected, you will hear a prompt sound.
| Press once| Enter PartyCast pairing mode
---|---|---
| Steady white| PartyCast pairing
| Steady white| PartyCast connected
When PartyCast mode is successfully entered
- Any Motion Boom Plus speaker can connect with a speaker supporting PartyCast 1.0 by pressing the PartyCast button twice.
- To exit PartyCast mode, press the PartyCast button once on any speaker.
Button Controls
| Press once| Play/Pause
| Press twice| Next track
**| Press three times| Previous track
-/+| Press or press and hold| Adjust volume
**| Press once| Turn BassUp on/off
| **** Press once| Answer/End a call
Answer a second incoming call and put the current call on hold
| **** Press and hold for 2 seconds| Reject an incoming call
Switch between a call on hold and an active call
****| Press and hold for 2 seconds| Activate Siri or other voice assistant software
Soundcore App
Download the Soundcore app to enhance your experience.
- Product information : Check the product name and software version, or read the user manual.
- Firmware update : You will be informed once a new version of firmware is detected when you connect the speaker with the app.
- Battery status : Indicates the remaining battery level of your speaker.
- Volume control : Adjust the volume level via the app without pressing the buttons on the speaker.
- EQ settings : There are 6 EQ settings you can choose from in the app to optimize your experience while enjoying different music genres.
- Soundcore Signature: Normal EQ mode with well-balanced sound.
- Voice : Voices stand out more clearly from other ambient sounds.
- Treble Boost : High frequencies are enhanced.
- Balance : No enhancement for high-frequency and low-frequency sounds.
- Custom: Customize the EQ setting to suit you in the app.
- BassUp : Turn on BassUp to enhance the low-frequency sound.
- Set Auto-power off time : Set an auto-power off time (5/10/30/60 minutes, 30 minutes by default), the speaker will automatically power off when the time is up.
- Voice prompt: Mute or restore the voice prompt while powering on/off.
Specifications
Specifications are subject to change without notice.
| Power input | 5V __ 3A |
|---|---|
| Battery capacity | 13400 mAh |
| USB output | 5V __ 2.1A |
| Audio output power | 80 W |
| Charging time | 5.5 hours |
| Playtime (varies by volume level and music content) | Up to 20 hours |
| Waterproof level | IP67 |
| Bluetooth version | 5.3 |
| Bluetooth range | 50 m / 164 ft |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>