TreasLin HSV812W Wireless HDMI Transmitter and Receiver Instruction Manual
- June 14, 2024
- TreasLin
Table of Contents
TreasLin HSV812W Wireless HDMI Transmitter and Receiver Instruction Manual
I About the product
This wireless HDMI extender supports a transmission resolution up to 3840*2160P 30Hz, easily immerse you in 4K movie worlds with sharper contrast and rich details. There is almost no lag in the transmission of audio and video, and wireless HDMI transmitter and receiver kit supports multiple resolution formats, such as 4K@30Hz, 1080P@60Hz, 720P@60Hz, and so on.
II Features
Wirelessly transmitting UHD signal (up to 200m under a barrier-free
environment without interference);
Support IR remote control; Local Video Loop Out; Built-in ESD electrostatic
protection circuit, thoroughly protect system safety; Easy to use and set up,
plug and play and require no extra settings;
III Installation Steps
- Connect HD cable first, connect signal source to Sender (transmitter) IN input, and connect the local display device to Sender (transmitter) LOOPOUT output;
- Connect the Receiver end of the extender to the remote display device (such as TV and splicing screen);
- IR function: Please align the transmitter’s IR end of the extender with the IR receiver end of the signal source that requires to be controlled, and make them close to each other.
IV Connection Diagrams
- One-to-One Wireless Application
V Port Instructions
5.1 Transmitter-end Device
5.1.1 Front Panel
5.1.2 Rear Panel
5.2 Receiver-end Device
5.2.1 Front Panel
5.2.2 Real Panel
VI Parameters
VII FAQ
Q: Why does the RX receiver end display “seaching TX ....”?
A: 1) Check whether the TX (the transmitter end) is connected to power well, andwhetherthe power indicator is on. 2) Check whether the transmitting distance is beyond the maximumvalue, or whetherthere are too much barriers such as wall. Try to install in a place without barriersandinterference.
Q: Why does IR reverse control fail to work?