Stealth Products P116D224R5 ADI Fixed ELITE Hardware Owner’s Manual

: June 14, 2024
: Stealth Products

Table of Contents

Stealth Products P116D224R5 ADI Fixed ELITE Hardware
Product Information
Contact Information
Product Usage Instructions
General
Important Information
Warranty
Supplier Reference
Limited Liability
Installation
Parts Required
First Time Use
Maintenance
Disinfection
Customer Satisfaction
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Stealth Products P116D224R5 ADI Fixed ELITE Hardware

Stealth-Products-P116D224R5-ADI-Fixed-ELITE-Hardware-
PRODUCT

Product Information

Product Name: Back Support
Product Model: ADI Fixed ELITE Hardware
Manufacturer: Stealth Products, LLC
Supplier: MDSS GmbH
Warranty: 2 years for covers, 5 years for hardware, and 3 years for electronics
Authorized Representative: MDSS-UK RP

Contact Information

Stealth Products, LLC 104 John Kelly Drive, Burnet, TX 78611
Phone: 512-715-9995 / Toll Free: 800-965-9229
Fax: 512-715-9954 / Toll Free: 800-806-1225
Email: info@stealthproducts.com.
Website: www.stealthproducts.com.

Product Usage Instructions

Important Information:
- The Back Support and ADI Fixed ELITE Hardware should only be fitted, applied, and installed by a healthcare professional trained for these purposes.
- Attempting to fit, apply, or install the product without proper training may result in serious injury.
Warranty Claim:
- In the event of a product failure covered by the warranty, please follow these steps:
- Call Stealth Products at 512-715-9995 or toll-free at 800-965-9229.
- Request a Return Authorization (RA) form from the Returns Department and follow the documentation instructions.
Downloading the Manual:
- You can download additional copies of the manual by accessing the Stealth website. and searching for “Fixed ELITE” in the search bar at the top of the page.
Warning Labels:
The product includes warning labels with different signal words. It is important to understand their meanings:
- DANGER: Identifies an imminent situation that, if not avoided, may result in severe injury, death, and property damage.
- WARNING: Identifies a potential situation that, if not avoided, may result in severe injury, death, and property damage.
- CAUTION: Identifies a potential situation that, if not avoided, may result in minor to moderate injury and property damage.
- NOTICE: Identifies important information not related to injury, but possible property damage.
- SAFETY: Indicates steps or instructions for safe practices, reminders of safe procedures, or important safety equipment that may be necessary.
Limited Liability:
- Stealth Products, LLC accepts no liability for personal injury or damage to property that may arise from the failure of the user or other persons to follow the recommendations, warnings, and instructions in this manual.
- Stealth Products does not hold responsibility for the final integration or assembly of the product to the end user. Stealth Products is not liable for user death or injury.

General

Read and understand all instructions prior to the use of the product. Failure to adhere to instructions and warnings in this document may result in property damage, injury, or death. Product misuse or failure to follow instructions will void the warranty.
Immediately discontinue use if any function is compromised, if parts are missing or loose, or if any component shows signs of excessive wear. Consult with your supplier for repair, adjustment, or replacement.
All persons responsible for fitting, adjustment, and daily use of the devices discussed in the these instructions must be familiar with and understand all safety aspects of the devices mentioned.
In order for our products to be used successfully, you must read and understand all instructions and warnings, and maintain our products according to our instructions on care and maintenance.
The installation instructions will guide you through this product’s options and possibilities.
Instructions are written with the expressed intent of use with standard configurations.
They also contain important safety and maintenance information, as well as describe possible problems that can arise during use. For further assistance, or more advanced applications, please contact your supplier or Stealth Products at (512) 715- 9995 or toll free at 800-965-9229.
Always keep the operating instructions in a safe place so they may be referenced as necessary.
All information, pictures, illustrations, and specifications are based on the product information that was available at the time of printing.
Pictures and illustrations shown in these instructions are representative examples and are not intended to be exact depictions of the various parts of the product.

Important Information

CAUTION

These products are designed to be fitted, applied, and installed exclusively by a healthcare professional trained for these purposes. The fitting, application, and installation by a non-qualified individual could result in serious injury.

Warranty

Our products are designed, manufactured, and produced to the highest of standards.
If any defect in material or workmanship is found, Stealth Products will repair or replace the product at our discretion.
Any implied warranty, including the implied warranties of merchantability and fitness for a particular purpose, shall not extend beyond the duration of this warranty.
Stealth Products does not warrant damage due to, but not limited to: misuse, abuse, or misapplication of product, and/or modification of product without written approval from Stealth Products, LLC.
Any alteration or lack of serial number, where applicable, will automatically void all warranties.
Stealth Products, LLC Is liable for replacement parts only. Stealth Products, LLC is not liable for any incurred labor costs.
Stealth Products warrants against failure due to defective materials or workmanship:
- Covers: 2 years
- Hardware: 5 years
- Electronics: 3 years
In the event of a product failure covered by our warranty, please follow the procedures outlined below:
Call Stealth Products at 512-715-9995 or toll-free at 800-965-9229.
Request a Return Authorization (RA) form from the Returns Department and follow the documentation instructions.
You can download additional copies of this manual by accessing the Stealth website (https://stlpro.site/stealth-docs) and searching “Fixed ELITE” in the search bar at the top of the page.

Supplier Reference

Supplier:|
---|---
Telephone:|
Address:|
|
Purchase Date:|
Model:|

Warning Labels

Warnings are included for the safety of the user, client, operator, and property. Please read and understand what the signal words DANGER, WARNING, CAUTION, NOTICE, and SAFETY mean, and how they could affect the user, those around the user, and property.

DANGER
Identifies an imminent situation that, if not avoided, may result in severe injury, death, and property damage.
WARNING
Identifies a potential situation that, if not avoided, may result in severe injury, death, and property damage.
CAUTION
Identifies a potential situation that, if not avoided, may result in minor to moderate injury and property damage.
NOTICE
Identifies important information not related to injury, but possible property damage.
SAFETY
Indicates steps or instructions for safe practices, reminders of safe procedures, or important safety equipment that may be necessary.

Limited Liability

Stealth Products , LLC accepts no liability for personal injury or damage to property that may arise from the failure of the user or other persons to follow the recommendations, warnings, and instructions in this manual.
Stealth Products does not hold responsibility for the final integration of the final assembly of the product to the end user. Stealth Products is not liable for user death or injury.

Installation

Tools Required for Installation and Adjustment

5mm Allen Wrench for tightening and adjusting bolts (Part B)
Reducer – Use when attaching CF Backs to 3/4″ (1.91 cm) tubing

Parts Required

Cap Piece – holds CF back-to-back posts with bolts. (A)
Bolts – bolts fasten bracket clamps on wheelchair back posts. (B)

NOTICE: Standard and Medium backs use one (1) bolt per clamp. Low backs use two (2) bolts per clamp.

Fixed Mounting Bracket – connects to the carbon fiber shell and fastens to bracket clamps with bolts. (C)
Contoured Foam Pad – held in place by the breathable cover. (D)
Breathable Cloth Cover – covers a contoured foam pad and attaches to the carbon fiber shell with Velcro. (E)
Carbon Fiber Shell – attaches with bracket clamps to the back posts of the wheelchair. (F)

NOTICE
Use only the hardware supplied with the ADI back on the ADI back. Do not substitute any other screws, brackets or clamps. Use of alternate hardware or mounting voids all warranties. $Stealth-Products-P116D224R5-ADI-Fixed-ELITE- Hardware-FIG-1 $1$$

Attaching Fixed CF Back to Chair

Remove existing wheelchair back support.
Place the CF Back onto the wheelchair back posts. Attach the cap piece (Part A) by inserting the bolts (Part B).
Adjust CF Back vertically for desired back support height.
- CAUTION: Do not fully tighten bolts.
Secure the CF Back by tightening each bolt with the 5mm Allen Wrench. Fully seat the bolt without stripping.
Check the CF Back to make sure it is secured properly. Have the user sit and check the back for comfort. If adjustments need to be made, have user transfer out of the chair and loosen the bolts (Part B). Then adjust the CF Back vertically if necessary. Re-tighten bolts when adjustment is complete.

NOTICE

The recommended bolt torque is 6.5 ft-lbs (8.8 N·m) Desired seat back angle is achieved by adjusting the seat back with the wheelchair manufacturer’s back post settings. $Stealth-Products-P116D224R5-ADI-Fixed-ELITE-Hardware-FIG-1 $2$$

CAUTION
When positioning the CF Back, the interior portion of the CF Back should be positioned to make contact at the PSIS to provide optimal pelvic support and trunk control.

First Time Use

Dealer Assistance
During first-time use by the client, it is advised that the dealer or service technician assists and explains the set-up to the customer (the user and/or the attendant). If needed, the dealer may make final adjustments.

CAUTION

ADI backs may not fit every chair. Please consult your clinician or supplier providing your equiupment. DO NOT attach the ADI back with the user in the chair.

User Testing

It is important that the customer is fully aware of the installation, how to use it, and what can be adjusted in order to gain as much mobility as possible. As a dealer, proceed as follows:

Explain and show the customer how you have executed the installation, and explain the function of the hardware.
If needed, adjust the hardware to the proper position.
Explain to the customer possible problems and how to address them.

CAUTION: Do not use ADI backs during vehicle transportation.

Conditions of Use
The ADI hardware is intended for use as installed by the dealer, in accordance with the installation instructions in this manual.

The foreseen conditions of use are communicated by the dealer or service technician to the user and/or attendant during the first time use.
If the usage conditions change significantly, please contact your dealer or a qualified service technician to avoid excessive wear and tear or unintended damage.

Maintenance

Cleaning

Use a soft cloth to clean the back shell.
Hand wash the foam pad cover with mild, soapy water or detergent and let dry.
Foam pad should NOT get wet.

WARNING

DO NOT immerse foam in water.
DO NOT wash or machine dry.
DO NOT hand wash in water temperatures above 160°F (70°C).

CAUTION

Institutions MUST clean and disinfect product between multiple patient uses.

Disinfection

Wipe gently with a cloth dampened with a household disinfectant.
Allow foam to air dry thoroughly.

SAFETY

Always check all mounting hardware, making sure each fastener is properly tightened before using the back support.

WARNING

User weight limit 250 lb. (113.40 kg)

NOTICE

Altering an ADI back in any way and/or improper installation will void the warranty.

Customer Satisfaction

Stealth Products is committed to 100% customer satisfaction. Your complete satisfaction is important to us. Please contact us with feedback or suggestions to help us improve the quality and usability of our products.

You may reach us at:

Stealth Products, LLC
104 John Kelly Drive, Burnet, TX 78611