Starway Aperta Moving Heads Camera User Manual

: June 14, 2024
: Starway

Table of Contents

Starway Aperta Moving Heads Camera
Product Information
Product Usage Instructions
Technical specifications
Introduction
DIMENSIONS
SAFETY
SPECTROMETRY
DMX CONNECTION
MENU
USER MODE MENU
FUNCTION MENU
INFORMATION
Gobo Wheel
DMX MAP
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Starway Aperta Moving Heads Camera

$Starway-Aperta-Moving-Heads-Camera-fig- $2$$

Product Information

Product: User Manual
Website: www.star-way.com
Version: 19032020 V1.0.2

Product Usage Instructions

Warning: Photobiological risk! Maintain a minimum distance of 0.8m between the beam and a flammable surface.

Dimensions:

Height: 278.4mm
Width: 186.99mm
Depth: 470mm

Color Information:

Red: 639nm, Lux: 6291 lux
Green: 534nm, Lux: 49027 lux
Blue: 448nm, Lux: 2864 lux

Eclairement:

Distance (m)	Lux
0.2	93750
0.3	60000
0.4	41667
0.5	30612
0.6	23438
0.7	18519
0.8	15000
0.9	12397
1.0	10417
1.1	8876
1.2	7653
1.3	6667
1.4	5859
1.5	5190
1.6	4630
1.7	4155
1.8	3750

DMX Connection:

GND – Ground
DATA+ – DMX Data Positive
DATA- – DMX Data Negative

Menu Architecture:

Menu options include Receive User Mode, Set Address, Edit A, Edit B, Edit C, Status, Fixture ID, Protocol Set, KlingNet, Net Switch, Dim Speed, Temp. C/F, Options, and more.

Function Information:

Functions include Dim Curve, Frequency, Quick Path, Fan Set, LCD Set, Display Set DFSE, Time Info, Temp. Info, Fan Speed, Error Info, Model Info, and more.

Test:

Test options include Reset, Motor Test, and Channel Test.

Technical specifications

Source: 1 X 50W RGB LED
Color temperature: 16800K
Beam opening angle: 1.83 ° – Field: 2.65 °
Illuminance: 60,000 Lux @ 5m
Infinite Pan & Tilt
QuickPath Pan & Tilt
Frost – 2 stackable prisms
5-pin XLR connector / RJ45
DMX modes: 19/22/25 Channels
RDM – ArtNet – sACN- KilngNet
Mode: Static, Auto, DMX
Power supply: AC100 ~ 240V – 50 / 60Hz
Max consumption: 150W (@ 220V)
Dimensions: 470 x 292 x 187mm
Weight: 13 kg
IP20
A maximum of 10 projectors can be connected to each other using the PowerCon Out connectors (in 240V).

Introduction

This product has been dedicated for indoor use only. Particularly suitable for scenes. TV set or discos. Controllable in DMX these projectors can be controlled by any DMX console.

DIMENSIONS

$Starway-Aperta-Moving-Heads-Camera-fig- $3$$

WARNING! Before carrying out any operations with the unit, carefully read this instruction manual and keep it with cure for future reference. It contains important about the installation, usage and maintenance of the unit.

SAFETY

GENERAL INSTRUCTION

The products referred to in this manual conform to the European Community Directives and are there-fore marked with CE:.
The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only. Never make any modifications on the unit not de-scribed in this instruction manual, otherwise you will risk an electric shock.
Connection must be made to a power supply system fitted with efficient earth-ing (Class I appliance ac-cording to standard EN 60598-1 ). It is, moreover, recommended to protect the supply lines of the units from indirect contact and/or shorting to earth by using appropriately sized residual current devices.
The connection to the main network of electric distribution must be carried out by a qualified electrical installer. Check that the main frequency and voltage correspond to those for which the unit is designed as given on the electrical data label.
Never use the fixture under the following conditions:
- in places wet;
- in places subject to vibrations or bumps;
- in places with an ambient temperature of over 45° C.
Make certain that no inflammable liquids, water or metal objects enter the fixture.
Do not dismantle or modify the fixture.
All work must always be carried out by qualified technical personnel. Contact the nearest sales point for an inspection or contact the manufacturer directly.
If the unit is to be put out of operation definitively, take it to a local recycling plant for a disposal which is not harmful to the environment.

WARNINGS AND INSTALLATION PRECAUTIONS

Never let the power cord come into contact with other cables! Handle the power cord and all connections with the mains with particular caution!
Never modify, bend, mechanically strain, put pressure on, pull or heat up the power cord.
Never strain the cable. There must always be sufficient cable going to the device. Otherwise, the cable will be damaged, which can cause serious damage.
Never remove warning or informative labels from the unit.
Never use anything to cover the ground contact.
Never lift the device holding it by the projector-head, as the mechanics may be damaged
Do not shake the device. Avoid brute force when installing or operating the device.
Only operate the device after having checked if the housing is firmly closed and all screws are tightly fastened.
Only operate the device after having familiarized with its functions.
Avoid flames and do not put close to flammable liquids or gases.
Always allow a free air space of at least 0.8 m around the unit for ventilation.
Always disconnect power from the mains, when device is not used or before cleaning! Only handle the power cord holding it by the plug. Never pull out the plug by tugging the power cord.
Make sure that the device is not exposed to extreme heat or dust.
Make sure that the available voltage is not higher than stated on the rear panel.
Make sure that the power cord is never crimped or damaged. Check the device and the power cord from time to time.
Make sure that the core diameter of extension cords and power cords is suffi-cient for the required power consumption of the device.
Always hold the device by the transport handles.
Never place any material over the LEDs or lens.
Never look directly into the light source.
Never leave any cables lying around.
Never use the device during thunderstorms, unplug the device immediately.
Never leave various parts of the packaging (plastic bags, polystyrene foam, nails, etc within children’s reach, as they potential sources of danger.
Do not insert objects into air vents.
Do not open the device and do not modify the device.
Do not connect this device to a dimmer pack.
Do not switch the device on and off in short intervals, as this will reduce the device’s life.
Do not touch the device’s housing bare-handed during its operation (housing be-comes very hot). Allow the device to cool for at least 5 minutes before handling.
If the lens or LEDs are obviously damaged, they need to be replaced to prevent their functions from being impaired, due to cracks or deep scratches.
If the external cable is damaged, it has to be replaced by a qualified technician.
If device was dropped or struck, disconnect mains power supply immediately. Have a qualified engineer inspect for safety before operating.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
If your device fails to work properly, discontinue the use immediately. Pack the unit securely (preferably in the original packing material), and return it to your dealer for service.
For adult use only. The device must be installed beyond the reach of children. Never leave the unit running unattended.
Never attempt to bypass the thermostatic switch or fuses.
For replacement use fuses of same type and rating only.
This device is heavy. When handling, use a two-person lift to prevent injury.
The user is responsible for correct positioning and operating of the device. The manufacturer will not accept liability for damages caused by the misuse or incor-rect installation of this device.
This device falls under protection class I. Therefore it is essential to connect the yellow/green conductor to earth.
Repairs, servicing and electric connection must be carried out by a qualified technician.

Rigging
This device is heavy. When handling, use a two-person lift to prevent injury. Please follow the European and national guidelines concerning rigging, truss- ing and all other safety issues.

SPECTROMETRY

Distance 5 meters

MEASUREMENTS MADE WITH USPECTRUM MK305S $Starway-Aperta-Moving-Heads-Camera- fig- $5$$ $Starway-Aperta-Moving-Heads-Camera-fig- $6$$ $Starway-Aperta-Moving-Heads-Camera-fig- $7$$ $Starway-Aperta-Moving-Heads-Camera-fig- $8$$

DMX CONNECTION

$Starway-Aperta-Moving-Heads-Camera-fig- $9$$

The projectors are connected in series to a DMX console. Connect the projectors as shown in the diagram above.

Connect the male side of the DMX cable to the output of the DMX512 console.
Then connect the DMX output of the projector to the input of the next projector.
Repeat the operation on the whole chain.

The use of a termination plug is strongly recommended. In some cases the absence of this termination is not problematic, on the other hand its presence is very strongly recommended in disturbed spaces (Stage, long line length, TV studio etc.). Its value is generally 120 Ohms. The plug is an XLR male plug into which a resistance of 120 Ohms ¼ of W. is welded between 2 and 3. This plug prevents the reflection of information transmitted when using long lengths of cable.

$Starway-Aperta-Moving-Heads-Camera-fig- $10$$

THE VALUES IN RED ARE DEFINED BY DEFAULT IN THE MENU AND RELOADED AS IN THE CASE OF «RELOAD DEFAULT SETTINGS»

Menu	Sous-Menu	Options
Receive	Set Address	A001~AXXX

User Mode

| ****

User Mode

| Standard (22 C) – (16bit)
Basic (19 C) – (8bit)
Extend (25 C) – (16bit)
User A
User B
User C
Edit A| Max Channel PAN, TILT, ….

:

Edit B
Edit C

Function

| ****

Status

Fixture ID

Dim Speed

| Dim 0

Dim 1

Dim 2

Dim 3

Dim 4

Temp. C/F

| Celsius| °C
Fahrenheit| °F

Function

| ****

Dim Curve

| Curve 1

Curve 2

Curve 3

Curve 4

---|---|---

Frequency

| 900HZ /1000HZ/1100HZ/1200HZ/1300HZ/

1400HZ/1500HZ/2500HZ/4000HZ/5000HZ/

10KHZ/15KHZ/20KHZ/25KHZ

Quick path| ON/ OFF

Fan Set

| Head Fan| Auto
High
Low

LCD.Set

Disp.Set

Information

| ****

Time.Info

Temp. Info

| R: XXXF|
G: XXXF|
B: XXXF|

Fan Speed

Software.V

| 1U01 V1.0.2|
2U01 V1.0.2|
3U01 V1.0.2|
4U01 V1.0.2|
5U01 V1.0.2|

Test

| ****

Reset.Motor

| All
---|---|---
Pan&Tilt
Fixed Gobo

Test.Channel

| Pan, Pan Fine, Tilt, Tilt Fine, Pan Rotate, Tilt Rotate, Red, Red Fine, Green, Green Fine, Blue, Blue Fine, Fixed Gobo, Prism1, Prism1Rot, Prism2, Prism- 2Rot, Strobe, Dimmer, Dim Fine, Focus, Frost, DimMode, P/T Speed, Reset/Prog

Panel.Ctrl.

| Pan, Pan Fine, Tilt, Tilt Fine, Pan Rotate, Tilt Rotate, Red, Red Fine, Green, Green Fine, Blue, Blue Fine, Fixed Gobo, Prism1, Prism1Rot, Prism2, Prism- 2Rot, Strobe, Dimmer, Dim Fine, Focus, Frost, DimMode, P/T Speed, Reset/Prog
PAN =XXX , …|

Calibrate

| Password| 60
PAN, TILT, …|

RECEIVE MENU
Address set: Configuration of the Aperta DMX address

User Mode: Selection of the DMX mode of the Aperta between the different modes such as:

Basic 19 DMX channels – 8-bit mode
Standard 22 DMX channels – 16-bit mode
Extended 25 DMX Channels – Extended 16-Bit Mode
User A – User mode 1
User B – User mode 2
User C – User mode 3

Edit A; Edit B; Edit C
In this sub-menu it is possible to create 3 channel assignments at the discretion of the user. In each “Edit A; Edit B and Edit C “it is possible to select the maximum number of channels, and to change the order of the DMX channels.

Status

In this sub-menu it is possible to modify the behavior of the Aperta.

No DMX Mode: Modification of the Aperta reaction during DMX signal loss:
- Hold: maintenance of the last DMX values received
- Auto: The Aperta switches to Auto mode
- Black Out: The Aperta goes into «Stand By» mode
P Reverse: ON / OFF – Pan inversion
T Reverse: ON / OFF – Tilt inversion
PAN degree: 630 ° Or 540 ° – Selection of the maximum angle of PAN (this value does not affect continuous rotation)
Feedback: ON / OFF – Activation or Deactivation of feedback motors (Copy)
Move Speed: Selection of movement speed between 1 and 4 1 – faster to 4 – slower
Hibernation: OFF – 01 Min to 99 Min – Selection of hibernation mode the Aperta. OFF by default or from 1 minute to 99 minutes before switching to hibernation mode.
Fixture ID
Sub-menu allowing the modification of the DMX universe of reception (ArtNet and sACN) as well as the IP address and the subnet mask of the Aperta.
- Universe: 0-255 – Selection of the DMX receiving universe
- UnitIPAddr: xxx.xxx.xxx.xxx – Selection of the Aperta IP address
- MaskAddr: xxx.xxx.xxx.xxx – Selection of the Aperta subnet mask
Net Switch
Sub-menu allowing the activation or deactivation of the Ethernet switch of the Aperta.
Dim Speed
Sub-menu allowing the selection of the Aperta dimmer mode between Dim 0 (default) and Dim 4.
Temp C ° / F °
Sub-menu for selecting the Celsius or Fahrenheit system (default), for displaying the temperature.
Dim Curve
Sub-menu allowing the selection of the Aperta dimmer curve between Curve 1 (default) and Curve 4
Frequen
Sub-menu allowing the selection of the refresh rate of the LED to avoid a possible «flicking» during the capture. Changeable value between 900Hz (default) and 25Khz.

QuickPath

Sub-menu allowing the activation or deactivation of the QuickPath function to define the behavior of the Aperta when switching from a continuous rotation movement to a «standard» movement.
This mode remains activated via the Control channel (19, 22 or 25 depending on the DMX mode chosen); when the value of the Control channel has been validated between 60 and 69, the Pan and Tilt will take the shortest path to go to the next position.
When the value of the Control channel has been validated between 50 and 59, the Pan and Tilt will take the “logical as a function of the virtual stop” path to go to the next position. $Starway-Aperta-Moving-Heads-Camera-fig- $11$$

This function is valid for Pan and Tilt.

Fan Set – Head Fan
Sub-menu for selecting the head fan speed between Auto (default) and Low or High.
LCD Set
Sub-menu allowing to select the behavior of the Aperta display.
- Backlight – 02m to 60m – Selection of the display backlight retention time (without menu manipulation) from 2 minutes to 60 minutes. Time set to 5 minutes by default.
- Flip Display – ON / OFF – Reversal of the display direction
- KeyLock – ON / OFF – Locking of the Aperta buttons.
- DispFlash – ON / OFF – Activation or not of the display flash when the Aperta does not receive a DMX signal.
Disp.Set
- Chan.Value – continuously displays the DMX values of all channels.
- Slave Set – Selection of the Aperta’s slave mode to «shift» the Aperta when using the Mas-ter / Slave mode – between Slave 1, Slave2 and Slave 3.
Auto Prog – Selection of Master / Slave mode:
- In MASTER mode the Aperta transmits the information to the Aperta connected using a DMX cable and where Slave mode has been activated in the “Slave Set” sub-menu
- In ALONE mode the Aperta does not transmit information and executes its AUTO mode individually.
DFSE – ON / OFF – Reloading the Aperta default settings.

INFORMATION

Time.Info

CurrentTime: Display of usage time (in hours) since the last power-up
TotalTime: Display of the usage time (in hours) since the first power-up.
LastTime: Display of the usage time (in hours) since the last reset.
Time PIN: To access the reset of usage times you must enter a PIN code:
- 050 to reset the «CurrentTime»
- 060 to reset the «TotalTime»
ClearLast: ON / OFF to reset
Temp.Info – LED temperature display
- R: xxx F or C – Red LED temperature display
- G: xxx F or C – Green LED temperature display
- B: xxx F or C – Blue LED temperature display
Fan Speed – Fan speed display
- Fan 1: xxx RPM
- Fan 2: xxx RPM
Error.Info – Display of the last 10 error messages.
Model.Info – Display of the model name: APERTA
Software.V – Display of the version of the various processors 1U01 – Vx.x.x
- 2U01 – Vx.x.x
- 3U01 – Vx.x.x
- 4U01 – Vx.x.x
- 5U01 – Vx.x.x
TEST
Reset Motors
- ALL: Reset of all motors
- Pan & Tilt: Reset of Pan and Tilt motors
- Fixed Gobos: Reset of the gobos wheel
Test.Channel
Sub-menu allowing to test all the parameters of Apreta such as:
Pan, Pan Fine, Tilt, Tilt Fine, Pan Rotate, Tilt Rotate, Red, Red Fine, Green, Green Fine, Blue, Blue Fine, Fixed Gobo, Prism1, Prism1Rot, Prism2, Prism2Rot, Strobe, Dimmer, Dim Fine, Focus , Frost, DimMode, P / T Speed, Reset / Prog
Panel.Ctrl.
Sub-menu allowing manual control of all Apreta parameters such as:
Pan, Pan Fine, Tilt, Tilt Fine, Pan Rotate, Tilt Rotate, Red, Red Fine, Green, Green Fine, Blue, Blue Fine, Fixed Gobo, Prism1, Prism1Rot, Prism2, Prism2Rot, Strobe, Dimmer, Dim Fine, Focus , Frost, DimMode, P / T Speed, Reset / Prog
Calibrate:
Sub-menu allowing to recalibrate the engines and the LEDs of the Aperta
to access this menu, enter the PIN code for unlocking this function.
Pin Code: 060
This gives access to the different parameters:
Pan, Pan Fine, Tilt, Tilt Fine, Pan Rotate, Tilt Rotate, Red, Red Fine, Green, Green Fine, Blue, Blue Fine, Fixed Gobo, Prism1, Prism1Rot, Prism2, Prism2Rot, Strobe, Dimmer, Dim Fine, Focus , Frost

Gobo Wheel

$Starway-Aperta-Moving-Heads-Camera-fig- $12$$

DMX MAP

Basic Mode

Channel	Value	Description
1	000-255	PAN 8bit
2	000-255	TILT 8bit

3

4

8

| FIXED GOBOS WHEEL
---|---
000-003| Open
004-007| Fixed Gobo1
008-011| Fixed Gobo 2
012-015| Fixed Gobo 3
016-019| Fixed Gobo 4
020-023| Fixed Gobo 5
024-027| Fixed Gobo 6
028-031| Fixed Gobo 7
032-035| Fixed Gobo 8
036-039| Fixed Gobo 9
040-043| Fixed Gobo 10
044-047| Fixed Gobo 11
048-051| Fixed Gobo 12
052-055| Fixed Gobo 13
056-059| Fixed Gobo 14
060-063| Fixed Gobo 15
064-073| Fixed Gobo 1 shake, from slow to fast
074-083| Fixed Gobo 2 shake, from slow to fast
084-093| Fixed Gobo 3 shake, from slow to fast
094-103| Fixed Gobo 4 shake, from slow to fast
104-113| Fixed Gobo 5 shake, from slow to fast
114-123| Fixed Gobo 6 shake, from slow to fast
124-133| Fixed Gobo 7 shake, from slow to fast
134-143| Fixed Gobo 8 shake, from slow to fast
144-153| Fixed Gobo 9 shake, from slow to fast
154-163| Fixed Gobo 10 shake, from slow to fast
164-173| Fixed Gobo 11 shake, from slow to fast
174-183| Fixed Gobo 12 shake, from slow to fast
184-193| Fixed Gobo 13 shake, from slow to fast
194-203| Fixed Gobo 14 shake, from slow to fast
204-211| Fixed Gobo 15 shake, from slow to fast
212-232| Rotating gobo wheel clockwise from slow to fast
233-234| STOP
235-255| Rotating gobo wheel counter-clockwise from slow to fast

9

| PRISM1
---|---
000-031| Open
032-255| 8 facet prism

10

11

| PRISM2
000-031| Open
032-255| 6 facet linear prism

12

13

16

17

| DIM MODES
---|---
000-020| DIM 0
021-040| DIM 1
041-060| DIM 2
061-080| DIM 3
081-100| DIM 4
101-255| Default to Unit Setting

18

| SPEED PAN/TILT MOVEMENT
000-225| max to min speed
226-235| blackout by movement
236-255| Idle

19

Standard Mode

Channel	Value	Description
1	000-255	PAN 8bit
2	000-255	PAN FINE 16bit
3	000-255	TILT 8bit
4	000-255	TILT FINE 16bit

5

6

10

| FIXED GOBOS WHEEL
---|---
000-003| Open
004-007| Fixed Gobo1
008-011| Fixed Gobo 2
012-015| Fixed Gobo 3
016-019| Fixed Gobo 4
020-023| Fixed Gobo 5
024-027| Fixed Gobo 6
028-031| Fixed Gobo 7
032-035| Fixed Gobo 8
036-039| Fixed Gobo 9
040-043| Fixed Gobo 10
044-047| Fixed Gobo 11
048-051| Fixed Gobo 12
052-055| Fixed Gobo 13
056-059| Fixed Gobo 14
060-063| Fixed Gobo 15
064-073| Fixed Gobo 1 shake, from slow to fast
074-083| Fixed Gobo 2 shake, from slow to fast
084-093| Fixed Gobo 3 shake, from slow to fast
094-103| Fixed Gobo 4 shake, from slow to fast
104-113| Fixed Gobo 5 shake, from slow to fast
114-123| Fixed Gobo 6 shake, from slow to fast
124-133| Fixed Gobo 7 shake, from slow to fast
134-143| Fixed Gobo 8 shake, from slow to fast
144-153| Fixed Gobo 9 shake, from slow to fast
154-163| Fixed Gobo 10 shake, from slow to fast
164-173| Fixed Gobo 11 shake, from slow to fast
174-183| Fixed Gobo 12 shake, from slow to fast
184-193| Fixed Gobo 13 shake, from slow to fast
194-203| Fixed Gobo 14 shake, from slow to fast
204-211| Fixed Gobo 15 shake, from slow to fast
212-232| Rotating gobo wheel clockwise from slow to fast
233-234| STOP
235-255| Rotating gobo wheel counter-clockwise from slow to fast

11

| PRISM1
---|---
000-031| Open
032-255| 8 facet prism

12

13

| PRISM2
000-031| Open
032-255| 6 facet linear prism

14

15

19

20

| DIM MODES
---|---
000-020| DIM 0
021-040| DIM 1
041-060| DIM 2
061-080| DIM 3
081-100| DIM 4
101-255| Default to Unit Setting

21

| SPEED PAN/TILT MOVEMENT
000-225| max to min speed
226-235| blackout by movement
236-255| Idle

22

Mode Extended

Channel	Value	Description
1	000-255	PAN 8bit
2	000-255	PAN FINE 16bit
3	000-255	TILT 8bit
4	000-255	TILT FINE 16bit

5

6

| TILT CONTINUOUS ROTATION
000-127| Idle
128-189| Tilt clockwise from fast to slow
190-193| STOP
194-255| Tilt counter-clockwise from slow to fast
7| 000-255| RED : 0-100%
8| 000-255| RED16BIT : 0-100%
9| 000-255| GREEN : 0-100%
10| 000-255| GREEN16BIT : 0-100%
11| 000-255| BLUE : 0-100%
12| 000-255| BLUE16BIT : 0-100%

13

| FIXED GOBOS WHEEL
---|---
000-003| Open
004-007| Fixed Gobo1
008-011| Fixed Gobo 2
012-015| Fixed Gobo 3
016-019| Fixed Gobo 4
020-023| Fixed Gobo 5
024-027| Fixed Gobo 6
028-031| Fixed Gobo 7
032-035| Fixed Gobo 8
036-039| Fixed Gobo 9
040-043| Fixed Gobo 10
044-047| Fixed Gobo 11
048-051| Fixed Gobo 12
052-055| Fixed Gobo 13
056-059| Fixed Gobo 14
060-063| Fixed Gobo 15
064-073| Fixed Gobo 1 shake, from slow to fast
074-083| Fixed Gobo 2 shake, from slow to fast
084-093| Fixed Gobo 3 shake, from slow to fast
094-103| Fixed Gobo 4 shake, from slow to fast
104-113| Fixed Gobo 5 shake, from slow to fast
114-123| Fixed Gobo 6 shake, from slow to fast
124-133| Fixed Gobo 7 shake, from slow to fast
134-143| Fixed Gobo 8 shake, from slow to fast
144-153| Fixed Gobo 9 shake, from slow to fast
154-163| Fixed Gobo 10 shake, from slow to fast
164-173| Fixed Gobo 11 shake, from slow to fast
174-183| Fixed Gobo 12 shake, from slow to fast
184-193| Fixed Gobo 13 shake, from slow to fast
194-203| Fixed Gobo 14 shake, from slow to fast
204-211| Fixed Gobo 15 shake, from slow to fast
212-232| Rotating gobo wheel clockwise from slow to fast
233-234| STOP
235-255| Rotating gobo wheel counter-clockwise from slow to fast

14

| PRISM1
---|---
000-031| Open
032-255| 8 facet prism

15

16

| PRISM2
000-031| Open
032-255| 6 facet linear prism

17

18

22

23

| DIM MODES
---|---
000-020| DIM 0
021-040| DIM 1
041-060| DIM 2
061-080| DIM 3
081-100| DIM 4
101-255| Default to Unit Setting

24

| SPEED PAN/TILT MOVEMENT
000-225| max to min speed
226-235| blackout by movement
236-255| Idle

25

In order to improve the products, technical modifications can be made without prior information.
This is the reason why the technical characteristics and the physical appearance of the products can change.
To benefit from the latest updates to our products, please log on to: www .star-way.com.

STARWAY
Paris Nord 2 78 Allée des Érables 93420 Villepinte France
Tél. : +33 (0)820 230 007