STarway BARACCA 360 Moving Head Projection Light User Manual

BARACCA 360 Moving Head Projection Light
User Manual

Technical specifications:

• Source : Laser white Led 260W – 9560°K
• 159000 Lux @ 1.7°@ 20m
• Beam angle : 1.7°
• Lens diameter 130 mm
• DMX : 20/23/28/32 Channels
• Protocols: DMX, Anent, sac
• Consumption max. : 400W (@230V)
• Dimensions : 361 × 273 × 515mm
• Weight : 22.2 kg

Introduction:

With its exceptional 1.7° beam angle and 260W laser source, BARACCA 360 reinvents the automatic Beam projector. Equipped with a 130 mm lens and capable of providing an illumination of 159,000 lux at 20 meters, it produces an extremely present beam in space, including over extreme distances. To express all your creativity, it incorporates a CYM color system, a 17 color wheel, a wheel of 19 fixed gobos and 2 stackable prisms (16 facets & 6 linear facets), as well as a frost. Its infinite rotation system in both Pan and Tilt associated with the Coeffects will allow you to create surprising effects and unparalleled simplicity of encoding.
DIMENSIONS READ CAREFULLY THIS INSTRUCTION MANUAL
KEEP IT WITH CURE BEFORE CARRYING OUT ANY OPERATIONS WITH THE UNIT, FOR FUTURE REFERENCE.
before installing, operating or maintaining this device, follow carefully directions of this instruction manual.
– WARNING! RISK OF FIRE –
MAINTAIN A MINIMUM DISTANCE OF 0.8 M BETWEEN THE BEAM AND A FLAMMABLE SURFACE.
Be careful photo-biological risk! attention !! professional lighting system
Do not look at the luminous flux in the axis.

SAFETY

• Warnings and installation precautions
• Never use the fixture in places with an ambient temperature of over 45° C (113° F), in places subject to vibrations or bumps;
• Mount the projector so that it remains stable at all times;
• Never let the power cord come into contact with other cables;
• Handle the power cord and all connections with the mains with particular caution!
• Do not insert objects into air vents.
• Do not open the device and do not modify the device: Risk of electric shock!
•  Do not connect this device to a dimmer pack.
• Do not switch the device on and off in short intervals, as this will reduce the device’s life.
• This device needs to connect the yellow/green conductor to earth. Never use anything to cover the ground contact.
• Only operate the device after having familiarized with its functions.
• Avoid flames and do not put close to flammable liquids or gases.
• Always allow a free air space of at least 80 cm (30 in.) around the unit for ventilation.
• Always disconnect power from the mains when device is not used or before cleaning!
• Only handle the power cord holding it by the plug.
• Make sure that the power cord is never crimped or damaged. Check the device and the power cord from time to time.
• If device was dropped or struck, disconnect mains power supply immediately. Have a qualified engineer inspect for safety before operating.
• If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
• If your device fails to work properly, discontinue the use immediately. Pack the unit securely (preferably in the original packing material) and return it to your dealer for service.
• For adult use only. The device must be installed beyond the reach of children.
• Never leave the unit running unattended.

Regulations
The products referred in this manual complies with the European Community directives and are there-fore marked with CE, ROHS, R&TTE.
Recycling
If the unit is to be put out of operation definitively, take it to a local recycling plan for a disposal which is not harmful to the environment.
Cleaning
Regularly clean the lens with a clean microfiber cloth. The use of compressed air facilitates the cleaning of the case.
Warranty applicable in European  Community
The manufacturer has designed and manufactured this product to give you complete satisfaction.
Nevertheless, if it appears that your product was defective, you benefit from a commercial guarantee of  24 months from the date of purchase.  To benefit from this guarantee, the user must return the product to the distributor, accompanied by the purchase invoice and by the serial  number. This warranty, applicable in European Community, covers all product defects that do not allow normal use of the product. It does not cover defects related to poor maintenance, improper use, foreseeable wear or  if the manufacturer’s recommendations have not been followed. The warranty does not cover normal wear and tear of parts related to the use of the product, such as battery, lamp, wheels, wear parts, etc. Given the defect and the part concerned, the guarantor will then decide to proceed repair or replacement of said part.
The guarantor is:  CSI Audiovisual – 22  rue Edouard Buford, 77144 Monteria  – France +33 148 632 211 The period for supplying spare parts under warranty is two years.
Rigging
This device is heavy. When handling, use a two-person lift to prevent injury.
Please follow the European and national guidelines concerning rigging, trussing and all other safety issues.
RISK GROUP 3
NEVER LOOK DIRECTLY AT LIGHT SOURCES BLUE LIGHT RISK GROUP 3
The manufacturer cannot be held responsible for damage caused by failure to follow the safety, installation or assembly instructions contained in this manual, or by any modification to this appliance.
The light source of this projector consists of laser diodes, which comply with the corresponding safety standard and are classified as follows:
Class 1 Laser Product (IEC60825-1:2014) —- RG3 (IEC 62471:2006)
It is prohibited to transfer the laser projectors to another person in the context of a pur- chase, rental or loan, unless this person can prove that he is capable of setting up laser `shows.
Dmx connection: The projectors are connected in series to a DMX console.
Connect the projectors as shown in the diagram above.

• Connect the male side of the DMX cable to the output of the DMX512 console.
• Then connect the DMX output of the projector to the input of the next projector.
• Repeat the operation on the whole chain.

The use of a termination plug is strongly recommended. In some cases the absence of this termination is not problematic, on the other hand its presence is very strongly recommended in disturbed spaces (Stage, long line length, TV studio etc.). Its value is generally 120 Ohms. The plug is an XLR male plug into which a resistance of 120 Ohms ¼ of W. is welded between 2 and 3. This plug prevents the reflection of information transmitted when using long lengths of cable.THE VALUES IN RED ARE DEFINED BY DEFAULT IN THE MENU AND RELOADED AS IN THE CASE OF «RELOAD DEFAULT SETTINGS»

DISPLAY SCREEN| Software Update Please Wait… Stairway Baraco 360 Fixture Check Motor Reset Please Wait…
---|---
SET| Set Ad-dress| A001-XXX| | |
User Mode| Standard 8B| 23 CH| | |
Standard 16B| 28 CH| | |
CK Extend 8B| 28 CH| | |
CK Extend 16B| 32 CH| | |
**** FUNCTION| **** Status| No DMX Mode| Black/Hold/Auto|
Perseveres| ON/OFF|
T. Reverse| ON/OFF|
Pan Degree| 630/540|
Feedback| ON/OFF|
Overspeed| Speed 1~ 4 (Fast>Slow)|
Hibernation| OFF, 01M~99M – 15M
**** Fixture ID| Service Pin| Password 050
Universe| 000-255
Unit IP addr| 2.xxx.xxx.xxx
Mask Addr| 255.xxx.xxx.xxx

Protocol Set

| Anent|
sac|
ON/OFF|

Dim Mode

| Standard Stage

TV

Architectural Theatre

| ****

A descent time is automatically applied to the dimmer in stage, TV, Architectural and theater modes,

Temp. C/F| Celsius| °C /°F
Fahrenheit
Dim Curve| Linear/Square/Inverse Square/S-Curve
Quick Path| ON/OFF
Frequency| 900HZ/1000HZ/1100HZ/1200HZ/1300HZ/1400HZ/1500HZ/
2500HZ/4000HZ/5000HZ/10KHZ/15KHZ/20KHZ/25KHZ
W-DMX| OFF| Disables the W-DMX receiver
| PAIR| Allows pairing with the receiver to be initiated
| RESET| Reset the previous pairing
FUNCTION|

Fan. Set

|

Head Fan

| Auto High Silent
---|---|---|---
LCD. Set| Backlight| 01~60m <01m>
Flip Display| ON/OFF
Key Lock| ON/OFF
Disp Flash| ON/OFF

Disp. Set

| Chan. Value| PAN
Slave Set| Slave1,Slave2
Auto. Prog| Master / Alone
DFSE| ON/OFF| Factory reset
USB Update| ON/OFF| USB activation for software update
INFORMA- TION| Time.Info| Current| – Operating time since switching on,
Total Time| – Total Operating time
Last Clear| – Time since the reset of the counter
Timer PIN| – Counter deletion code. (Code = 050)
Clear Last| ON/OFF       Counter Reset
Temp. Info| Head xxxF/C
Base xxxF/C
Fan Speed| Head-1:xxxxRPM
Head-2:xxxxRPM
Base-1:xxxxRPM
Base-2:xxxxRPM
Error. Info| NONE,Pan,Tilt .
Model. Info| Baraco 360
Software| 1U:V1.0.X
2U:V1.0.X
3U:V1.0.X
TEST| Reset. Motor| A11/Pan Tilt/Head
Test. Channel| PAN; TILT; etc.| Self test of each function
Panel. Ctrl.| PAN =XXX; Tilt =XXX; etc.| Manual adjustment of each function
Calibrate| -Password-| | Code = 050

SET MENU

Address set:
Baracca 360 DMX address configuration
User Mode:
Selection of the Baracca 360 DMX mode between the different modes such as:

• Standard 8B – 23 DMX channels
• Standard 16B – 28 DMX channels
• CK Extended 8B – 28 DMX channels
• CK Extended 16B – 32 DMX channels

FUNCTION MENU
Status
In this submenu it is possible to modify the Baraco 360 behavior.
No DMX Mode
Modification of Baraco 360 reaction during DMX signal loss:

• Hold: maintenance of the last DMX values received
• Auto: The Baracca 360 goes into Auto mode
• Black Out: Baracca 360 goes into “Stand By” mode

P Reverse: ON / OFF – Pan inversion
T Reverse: ON / OFF – Tilt inversion
PAN degree: 630 ° Or 540 ° – Selection of the maximum angle of PAN
Feedback: ON / OFF – Activation or Deactivation of feedback motors (Copy)
Move Speed: Selection of movement speed between 1 and 4 1 – faster to 4 – slower
Hibernation: OFF – 01 Min to 99 Min – Selection of hibernation Baraco 360 mode. OFF by default or from 1 minute to 99 minutes before switching to hibernation mode.
Fixture ID
Sub-menu allowing modification of the DMX universe of reception (Anent and sac) as well the IP address and subnet mask of the Baraco 360.

• Universe: 0-255 – Selection of the receiving DMX universe
• UnitIPAddr: xxx.xxx.xxx.xxx – Baraco 360 IP address selection
• Masked: xxx.xxx.xxx.xxx – Baraco 360 subnet mask selection

Protocol Set
Submenu for selecting the Baraco 360 network protocol: Anent (default) or sac
Net Switch
Sub-menu allowing the activation or deactivation of the Ethernet switch of the Baraco 360.
Dim Mode
Sub-menu allowing the selection of Baraco 360 dimmer mode between Standard (default), Stage, TV, Architectural and Theater. A descent time is automatically applied to the dimmer in stage, TV, Architectural and theater modes.
QUICKPATH
Sub-menu allowing the activation or deactivation of the Quickhatch function to define the behavior of the Baraco 360 when switching from a continuous rotation movement to a «standard» movement.
This mode remains activated via the Control channel (23, 28, 28 or 32) depending on the DMX mode chosen); when the value of the Control channel has been validated between 60 and 69, the Pan and Tilt will take the shortest path to go to the next position. When the value of the Control channel has been validated between 50 and 59,
the Pan and Tilt will take the “logical as a function of the virtual stop” path to go to the next position. This function is valid for Pan and Tilt.
Temp C ° / F °
Submenu for selecting the Celsius or Fahrenheit system (default), for displaying the temperature.
Dim Curve
Sub-menu allowing the selection Baracca 360 dimmer curve between Linear, Square (default), Inverse Square and S-Curve.
Frequency
Submenu allowing the selection of the refresh rate of the LED to avoid a possible «flicking» during video filming. Changeable values between 900Hz and 25KHz.
Fan Set
– Head Fan
Submenu for selecting the head fan speed between Auto (default) and Silent or High.
LCD Set
Submenu allowing to select the behavior of Baraco 360 display.
Backlight – 01m to 60m – Selection of the display backlight retention time (without menu manipulation) from 1 minutes to 60 minutes. Time set to 1 minute by default.
Flip Display – ON / OFF – Reversal of the display direction Key Lock – ON / OFF – Lock the Baraco 360 menu buttons.
Dips Flash – ON / OFF – Activation or not of the display flash when Baraco 360 does not receive a DMX signal.
Dips. Set
Chan.Value – continuously displays the DMX values of all channels.
Slave Set – Selection of the slave mode of the Baraco 360 to «shift» the Baracoa 360 when using the Master / Slave mode – between Slave 1, Slave2 and Slave 3.
Auto Prog – Selection of Master / Slave mode:
In MASTER mode Baraco 360 transmits information to the Baraco 360 connected using a DMX cable and where Slave mode has been activated in the “Slave Set” submenu
In ALONE mode the Baraco 360 does not transmit information and executes its AUTO mode individually.
DFSE – ON / OFF – Reloading the Baracca 360 default parameters.
USB Update – ON / OFF – USB activation for software update.
See the procedure on page 24

INFORMATION

Time.Info
Current Time: Display of usage time (in hours) since the last power-up Total Time: Display of the usage time (in hours) since the first power-up. Last Time: Display of the usage time (in hours) since the last reset. Time PIN: To access the reset of usage times you must enter a PIN code: 050 to reset the «Current Time»
Clear Last: ON / OFF to reset
Temp. Info – temperature display
Head: xxx F or C – Head temperature display
Base: xxx F or C – Base temperature display
Fan Speed – Fan speed display

• Head 1 : xxx RPM
• Base 1 : xxx RPM

Error. Info – Display of the last 10 error messages.
Model. Info – Model name display: Baracca 360
Software. V – Display of the version of the various processors

• 1U – Vx.x.x
• 2U – Vx.x.x
• 3U – Vx.x.x

TEST
Reset Motors
ALL: Reset of all motors
Pan & Tilt: Reset of Pan and Tilt motors
Head: Reset of all head motors
Test. Channel
Submenu allowing to test all the Baraco 360 parameters such as:
Pan, Pan Fine, Tilt, Tilt Fine, CMY, Color, Gobo, Fixed Gobos, Prism1, Prism1Rot, Prism2, Prism2Rot, Focus, Frost, Strobe, DimmPrims er, Dim Fine, Dimmed, P/T Speed.
Panel.Ctrl.
Sub-menu allowing manual adjustment of all Baraco 360 parameters such as: Pan, Pan Fine, Tilt, Tilt Fine, CMY, Color, Gobo, Fixed Gobos, Prism1, Prism1Rot, Prism2, Prism2Rot, Focus, Frost, Strobe, Dimmer, Dim Fine, Dimmed, P/T Speed.
Calibrate :
Sub-menu allowing to recalibrate the motors as well as the Baraco 360’s focus preset parameters.
To access this menu you must enter the PIN code for unlocking this function.
Code Pin : 050
This gives you access to the various parameters: Pan, Tilt, CMY, Color, Gobo, Focus, Prism1, Prism1Rot, Prism2, Prism2Rot, Focus, Frost
COLOR WHEEL Prims FIXED GOBO

DMX Map

Modes DMX CK Ext
CK Effect :
This function makes it possible to simplify the programming of Pan and Tilt, whether in continuous rotation or in conventional movements. With only two parameters for  the Pan and two for the Tilt, it is possible to define the illumination area of the projector. First of all, it is necessary to define the angle during which the source is lit, then its position.
This zone is independent of the movement speed. It is also possible to adjust the fade time on switching on and off when passing through this zone.

USB Firmware upgrade :

1. Place the update files in a directory on the USB key,
   In this example LUSSO:

2. urn on the projector and go to the menu by pressing “Mode” > “Function” > “USB Update” > “On”, exit the menu and turn off the projector.

3. Projector off, DMX or WDMX disconnected, insert the USB key into the connector located on the front panel.

4. Turn on the projector > the screen displays the available directories> select the folder according the projector In this example LUSSO

5. Select «Start» and press «Enter»

6. The update process starts and will upgrade each electronic board. The projector will perform a reset at the end of the process

7. Remove the key and check the software versions by pressing «Mode» > «Information» > «Software. V» > «Enter»

8. Go to the menu by pressing “Mode” > “Function” > “USB Update” > “OFF”, exit the menu.

STARWAY
22 rue Edouard Bufford
77144 Monteria
France
Tell. : +33 148 632 211
www.star-way.com
Version 17022023 V1.0.1

References

• Starway, fabricant de projecteurs et éclairage professionnel

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>