ANCwear ANC-107 Smart Watches for Men Women User Manual
- June 14, 2024
- ANCwear
Table of Contents
ANC-107 Smart Watch
USER MANUAL
Version 1.0
ANC-107 Smart Watches for Men Women
Please read the instructon carefully before use
Ger Started
Product parameters
Model | ANC-107 |
---|---|
Pairing | Bluetooth 5.0; 10 m / 33 ft |
Screen Type | 1.83″ IPS |
Waterproof Level | IP68 |
Battery Capacity | 230 mAh |
Charging Time | 2 hours |
Working Time | 15 days |
Weight | 37g / 1.3oz |
Band Width | 20 mm |
Set Up Your Watch
Charge your watch
NOTE: Please fully charge your watch before initial use.
- Plug the USB charging cable into the USB port of your computer or a UL-certified USB wall charger.
- Hold the magnetic end of the charging cable to close to the port on the back of the watch until it adheres.
Attach/Remove your watch Attach
- To attach a wristband, slide the pin (the side opposite the quick-release lever) into the notch on the watch.
- While pressing the quick-release lever inward, slide the other end of the wristband into place.
- When both ends of the pin are inserted, release the quick-release lever.
Remove
- Turn over ANC-107 and find the quick-release lever.
- While pressing the quick-release lever inward, gently pull the wristband away from the watch to release it.
Use Your Watch
Watch connection
-
Download the “Da Fit” app
♦ Search for “Da Fit” in the App Store or Google Play.
♦ Scan the QR code below.
NOT :
♦ The “Da Fit” app is only compatible with smartphones, not tablets or PCs.
♦ Smartphone operating system should be iOS 9.0 / Android 5.0 or later. -
Pair the watch with your phone
Please pair the watch with your phone with the “Da Fit” app, NOT through Bluetooth settings of your phone.
♦ Enable the Bluetooth of your smartphone.
♦ Open the “Da Fit” app and go to the “Device” page, tap “ADD A DEVICE”, find the smart watch named “ANC-107” and connect it.
NOTE: The watch can only pair with one smartphone at a time. While pairing, please make sure the watch didn’t connected to another device.
Get Know Your watch
Watch interfaces
- Swipe down to enter Control Center;
- Swipe up to see the Menue;
- Swipe right to quickly check the weather and quick entry;
- Swipe left to the feature pages, including activity, sleep, heart rate, BP, SpO2, weather, etc.
- Long press the home page to change the watch face.
Icons Introduction
Main Featuers
Activity
Display your daily activity data, including steps, distance and calories.
NOTE: Your daily activity resets to zero at midnight. Sleep
Track your sleep duration and quality to analyse comprehensively.
NOTE: Sleep stats reset to zero at 8:00 pm. Heart Rate
All day automatic monitoring of your heart rate, tap the screen to start
measuring your heart rate. Sports Mode
With 120 built-in sports modes, swipe down to tap the “+” sign to add more.
Click to set the exercise goal you want to achieve. Blood Pressure
Tap the screen to start measuring your blood pressure and record your last
measurement. SpO2
Tap the screen to start measuring blood oxygen values. Weather
The weather is automatically synchronised when the app is connected and shows
the last 6 days of weather conditions. Camera
After connecting the app, you can remote control the camera on the watch.
NOTE: When using the camera, please open the “Da Fit” app. Music
Player
Automatcally switch or pause music via the watch when the watch is connected
to the app. Alarm
Set up the alarm on the app, the device will vibrate to remind on time. Stop
Watch
Tap the start button on stopwatch page to start timing, and tap the stop
button to stop timing. Timer
Select the value you want to count down to, or customise the time you want.
Setting
Display
-
Auto Sleep
Tap the “Auto Sleep” button to set the watch’s screen-on time. -
Menu View
In “Menu view”, you could choose your preferred menu style. -
In the “Display”, you could also use the “Brightness” and “Watch Face” function.
-
Vibration
You could set the vibration mode of the watch. -
Low Power Mode
Enable this mode, it will turn off vibration / quick view, and turn down the brightness. -
More Setting
In “System”, you could restart, power off and reset your watch.
Get To Konw “Da Fit” App
APP interface
View data chart on app
Watch faces
♦ Open APP–>WATCH FACES
Notification
♦ Open APP–>NOTIFICATIONS–>Open the message reminder
Alarm
♦ Open APP–>ALARMS Other settings
♦ Open APP–>OTHERS
Notice
Warranty
- One year warranty for manufacturing defects.
- Any quality defects, contact us, you will get A Full Refund or A Free Replacement!
Important instructions
Please read the safety guidelines on the following pages to ensure proper use
and care.
- Do not expose your device to liquid, moisture, humidity or rain while charging, do not charge your device when it is wet, as this may result in electrical shock and injury.
- Do not expose your watch to extremely high or low temperatures.
- Do not use your device in a sauna or steam room.
Battery warnings
A lithium-ion battery is used in this device. When using this smart watch,
please observe the following guidelines for using batteries.
- Do NOT disassemble, modify, puncture or damage the device or batteries.
- Do NOT remove or attempt to remove the non-user-replaceable battery.
- Do NOT expose the device or batteries to fire,explosion, or other hazards.
Health reminder
- If you have a pacemaker or other internal electronic device, consult your physician before using a heart rate monitor.
- The device is intended to be used only for general fitness purposes, not for medical purposes, and are not intended to prevent any disease or condition.
- No matter what the situation, if your skin feels uncomfortable, remove the watch.
- The smart watch relies on sensors to track your activities and body metrics, including step, sleep, heart rate, blood oxygen, and blood pressure. The data and information provided by these devices are maybe not completely accurate due to be limited by technology.
Maintenance
- Regularly clean your wrist and the smart watch, especially after sweating during exercise or being exposed to substances such as soap or detergent which may adhere to the internal side of the watch.
- Though the watch is waterproof, wearing a wet band is not good for your skin.
- Do not contact your device with any sharp objects, as this could cause scratches and other damage.
FAQS
Q: Why is failure to receive SMS / calls notification?
Q: How is the HR / BP / SpO2 measurement accuracy?
A: The measurement data will be affected by factors such as motion, watch placement on the wrist and skin condition, etc. These factors will cause fluctuations. When measuring, please ring the sensor close to the skin and contact well. Please keep the bottom of the sensor clean during measurement. The smart watch sensor isn't a medical device and won't be able to diagnose or monitor any medical conditions. If there is a problem with the measurement, we recommend you consult your doctor.
ANCwearR
Dear Customer,
Thank you very much for choosing our Smart Watch.
ANCwear is always been committed to providing superior products and services.
We hope that our products can not only meet your basic needs, but also bring
more health and happiness to your life.
If you have any questions or suggestions regarding our products, please
contact us! Highly appreciate getting your objective review. We will listen
patiently and solve the problems whole heartedly.
Wish you all the best!
Yours sincerely,
ANCwear Service Team
Customer Support:
Email: Support_US@ancwear.com
Support_UK@ancwear.com
Support_EU@ancwear.com
Support_Global@ancwear.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>